Brand:

AUMA SAREx 25.1 Explosion-Proof Modulating Actuator

Description

Overview

AUMA SAREx 25.1 opens the IIB part of the SAREx range as seventh frame. It delivers 1,000 to 2,000 Nm tripping torque (S4-25 %), up to 800 / 400 Nm modulating torque (S4-25 % / S4-50 %) and an F25 flange.

Buyers in Oman and the GCC can source the SAREx 25.1 from Seven Star LLC, a trusted AUMA supplier. Pipeline and terminal projects near Sohar and Salalah receive support from our Muscat team. Alternatives from the same maker include the Ex modulating range (SAREx), the SAEx series overview and the AUMA MATIC AM/AC integral actuator controls.

Operating Principle of the AUMA SAREx 25.1

A 3-phase motor with intermittent-duty rating drives the SAREx 25.1 through a reduction gear. The documented minimum pulse is the time the motor must be powered before the output drive moves, and a longer time applies on reversal. AUMA documents the SAREx as self-locking, and AMExC or ACExC controls drive the actuator.

Engineering Design of the AUMA SAREx 25.1

For the SAREx 25.1, the speed choice is limited to 8 and 11 rpm as standard (4 and 5.6 rpm on request), which makes loop gain adjustment important: a slow actuator needs a controller that does not demand rapid movement. At 155 kg the unit needs a hoist, and the F25 flange and 95 mm stem bore must be checked against the valve.

The actuator controls connect directly to terminals, and the motor terminals sit in a separate compartment. IP67 is standard, IP68 is optional, and the heater option is 12.5 to 25 W.

Key Features of the AUMA SAREx 25.1

Data points that matter most when specifying the SAREx 25.1:

  • Tripping torque of 1,000 to 2,000 Nm (S4-25 %) and 1,400 Nm at S4-50 %.
  • Modulating torque up to 800 / 400 Nm (S4-25 % / S4-50 %).
  • Speed range 4–11 rpm (4 and 5.6 rpm on request) (50 Hz); permitted starts depend on the band.
  • Approximate weight of 155 kg and 160 mm handwheel (as printed in the data sheet).
  • Pulse timing 100 ms (same direction); on reversal 275 ms at 4 rpm down to 130 ms at 11 rpm. Motors of 1.1–3.0 kW at 400 V.

Selecting the AUMA SAREx 25.1 for Your Valve

The SAREx 25.1 brings modulating duty to large valves in the larger frame series: 1,000 to 2,000 Nm tripping torque (S4-25%), 800 Nm modulating torque, an F25 flange and 95 mm stem capacity. Output speeds are limited to 8 to 11 rpm as standard (4 and 5.6 rpm on request), and 300 starts per hour are permitted. The handwheel diameter stated in the data sheet is 160 mm.

Moving from the SAREx 16.2 to the SAREx 25.1 doubles the tripping torque from 1,000 to 2,000 Nm and enlarges the flange from F16 to F25. Valves above that ceiling are covered by the SAREx 30.1, which reaches 4,000 Nm on F30 and weighs 195 kg.

AUMA SAREx 25.1 Modulating Torque and Starts by Speed

The following limits apply to the AUMA SAREx 25.1 at rated voltage and an ambient temperature of +40 °C. Tripping torque is adjustable up to 2,000 Nm (S4-25 %) or 1,400 Nm (S4-50 %). Illustrative calculation, not AUMA data: a control valve with 20 turns per stroke needs 150 s at 8 rpm and 109 s at 11 rpm for a full stroke.

rpm (50 Hz) Modulating torque S4-25 / S4-50 %, Nm Max. starts per hour
8–11 (4 and 5.6 rpm on request) 800 / 400 300

Loop-tuning note: the SAREx 25.1 specifies a 100 ms minimum pulse, reversal pulses of 275, 220, 155 and 130 ms at 4, 5.6, 8 and 11 rpm, and 300 starts per hour for every speed. Because the speed does not change the starts limit, 11 rpm is the natural choice when faster response is needed, while 8 rpm gives a longer stroke time and finer positioning resolution.

Worked Sizing Example for the SAREx 25.1 (Illustrative Calculation)

A big flow-control valve in a pipeline terminal has a friction torque of 700 Nm. The SAREx 25.1 offers 800 Nm modulating torque at S4-25 %, which covers it, but only 400 Nm at S4-50 %, so the controller must keep the on-time below 25 % of the cycle. With 300 starts per hour, 8 or 11 rpm and a 100 ms minimum pulse, the actuator suits a slow-moving process such as tank-level or terminal-flow control. This is an illustrative calculation, not AUMA data.

Motor and Electrical Data of the AUMA SAREx 25.1

2 speed points from AUMA’s separate electrical data sheet (S4-25 %, 400 V / 50 Hz), 1.1 to 3.0 kW; approximate values that are not part of the technical datasheet attached here.

Output rpm Type PN, kW IN (A) Imax (A) IA (A) cos φ
4 ADXR90-8/130 1.1 7.0 9.0 17 0.48
11 ADXR90-4/130 3.0 7.0 12 38 0.80

Explosion Protection and Installation Notes for the AUMA SAREx 25.1

Standard ATEX markings of the SAREx 25.1 per AUMA: II 2G Ex db eb IIB T4 or T3 Gb, II 2G Ex h IIB T4 or T3 Gb and II 2D Ex tb IIIC T130 °C or T190 °C Db. Certificate: TÜV 14 ATEX 7542 X. Confirm temperature class and zone on the nameplate.

Intermittent duty S5-25 % needs insulation class H; standard is class F, tropicalized. Ambient temperature is minus 30 °C to plus 40 °C or plus 60 °C, with options down to minus 40 °C and minus 60 °C.

Industrial Applications

The AUMA SAREx 25.1 handles large control valves in hazardous areas, for example large throttling valves on pipeline stations, and big flow-regulation valves where 800 Nm modulating torque is required. The slow output speeds (8 to 11 rpm as standard) suit valves with long strokes that are controlled gently.

In Oman, pipeline and terminal operators need this frame size for large control duty. Seven Star LLC supports quotations, delivery planning and documentation for the SAREx 25.1.

Technical Specifications

Core data of the AUMA SAREx 25.1 as published by AUMA; the official data sheet remains binding.

Property Detail
Model AUMA SAREx 25.1
Torque range S4-25 % 1,000–2,000 Nm
Output speeds 4–11 rpm (4 and 5.6 rpm on request)
Flange / stem F25 / 95 mm
Handwheel / weight 160 mm (as printed in the data sheet) / 155 kg
Gas group IIB
ATEX certificate TÜV 14 ATEX 7542 X
Enclosure IP67, IP68 option
Modulating torque 800 / 400 Nm

Neighbouring sizes and counterparts: AUMA SAREx 16.2 explosion-proof modulating actuator, AUMA SAREx 30.1 explosion-proof modulating actuator, AUMA SAEx 25.1 explosion-proof actuator and AUMA SAR 25.1 modulating actuator.

Request a Quote for AUMA SAREx 25.1

Send your RFQ for the AUMA SAREx 25.1 to Seven Star LLC.

Datasheets & Documents
  • PDF Datasheet AUMA SAREx 25.1 - SAREx 30.1 Technical Data Sheet (modulating duty, 3-phase AC) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

AUMA builds electric actuators for industrial valves, gates and dampers. The company was founded in 1964 near Stuttgart by Werner Riester and Rudolf Dinse, moved its headquarters to Müllheim in south-west Germany in the early 1970s, and still trades as the owner-managed AUMA Riester GmbH & Co. KG. Its actuators run isolation and control valves in water, power, oil and gas and process plants worldwide.

Seven Star LLC is an independent supplier listing AUMA multi-turn and part-turn actuators, actuator controls, gearboxes and spare parts for buyers in Oman and the GCC. We work from the nameplate data so that a replacement matches the installed actuator, controls and gearbox.

AUMA company profile

Origin Founded in 1964 by Werner Riester (engineering) and Rudolf Dinse (sales and finance); registered as Riester KG in Esslingen. Water and wastewater plants were the first customers.
Headquarters Müllheim, Baden-Württemberg, Germany (since the early 1970s). Production in Germany, with further plants in India, the USA and China, and around 30 sales and service companies worldwide.
Ownership Privately held, owner-managed company: AUMA Riester GmbH & Co. KG
Torque and thrust range Multi-turn, part-turn and linear actuators from 1.5 Nm to 675,000 Nm with gearboxes, and linear thrust up to 217 kN, as published by AUMA
Design principle Modular: actuator, integral controls and gearbox are combined to suit the valve, so one actuator size can serve open-close, modulating, fieldbus or explosion-proof duty

Milestones

  • 1964: Werner Riester and Rudolf Dinse found AUMA near Stuttgart; the first actuator range follows, with water and sewage plants as the first customers.
  • Early 1970s: Lack of space in Nellingen leads to the move to Müllheim in south-west Germany.
  • 1974: AUMA Benelux, the first foreign subsidiary, is founded.
  • Today: About 2,800 employees worldwide, around 850 of them in Müllheim, according to AUMA.

AUMA actuator, controls and gearbox series

Series Type Typical use
SA 07.2 to SA 16.2, SA 25.1 to SA 40.1 Multi-turn actuators, open-close duty Gate and globe valves, sluice gates and penstocks; SA 07.2 to 16.2 cover roughly 10 to 1,000 Nm, the .1 sizes go far higher
SAR 07.2 to SAR 30.1 Multi-turn actuators, modulating duty Control valves that receive a continuous position setpoint and many starts per hour
SAV, SARV, SQV, SQRV Variable-speed actuators Slow approach to the seat to limit water hammer, fast travel elsewhere
SQ 05.2 to SQ 14.2, SQR Part-turn actuators Ball, butterfly and plug valves and dampers, about 50 to 2,400 Nm; SQR for modulating duty; FQM fail-safe unit for spring-return action
SAEx, SAREx, SQEx, PROFOX-MX, TIGRON Explosion-proof actuators Hazardous areas in oil, gas and chemical plants, with ATEX and IECEx certified versions
AUMA MATIC AM, AUMATIC AC, ACExC 01.2, AMExC 01.1, AC 01.2-SIL Integral actuator controls AM for simple parallel wiring; AC for positioning, diagnostics and fieldbus (PROFIBUS DP, PROFINET, Modbus, FOUNDATION Fieldbus, HART depending on version); SIL version for safety functions
GS, GHE, SA + GS combination Part-turn worm gearboxes Large butterfly and ball valves, from GS 63.3 up to GS 630.3 at 675,000 Nm
GK, GST, GHT, GP Multi-turn gearboxes (bevel, spur, worm, planetary) Offset or right-angle drives and very high multi-turn torque
LE, SVC/SVCR, PROFOX-L Linear actuators and thrust units Globe and control valves with a rising stem, up to 217 kN
PROFOX-M, PROFOX-Q Compact smart actuators Small valves where a full SA or SQ is oversized
SA-UW, SGM/SGMR, SVM/SVMR, SAN/SARN Special versions Submerged valves, seawater-exposed ship and offshore duty, nuclear plant service
SIMA2 Master station Fieldbus network management for many actuators on one plant

Where AUMA actuators are used

Water transmission and treatment is the largest use: pipeline isolation valves, pumping stations, desalination plants and sluice gates. AUMA actuators also run valves in power plant steam, feedwater and cooling systems, pipelines and tank farms, refineries and chemical plants, and on ships and offshore platforms. In the Gulf, check the ambient temperature rating, since actuators in direct sun can exceed 50 °C, and specify the enclosure protection for sand and humidity.

Ordering AUMA actuators and spare parts: what we need

For a replacement, send photos of the actuator, motor and controls nameplates: type designation, commission or order number, serial number and wiring diagram number. AUMA identifies the original build from the commission number. For a new actuator, add the valve type, required torque or thrust at the worst case, number of turns or swing angle, operating time, mounting flange to ISO 5210 or ISO 5211, stem or shaft dimensions, duty (open-close or modulating), supply voltage and frequency, control signals or fieldbus, and the hazardous-area marking required on site.

Facts checked against AUMA product information and the company history published by AUMA, October 2026.

FAQ

Questions about the AUMA SAREx 25.1 Explosion-Proof Modulating Actuator

Answers from our engineering team on installation, compatibility and integration.

01What torque and modulating torque does the AUMA SAREx 25.1 offer?
The AUMA SAREx 25.1 has a tripping torque range of 1,000 to 2,000 Nm at S4-25 % duty and up to 1,400 Nm at S4-50 %. The maximum modulating torque is 800 / 400 Nm (S4-25 % / S4-50 %), and on some frames it is reduced at higher output speeds.
02Which flange, stem size and handwheel does the AUMA SAREx 25.1 use?
The AUMA SAREx 25.1 uses an EN ISO 5210 F25 flange (DIN 3210 option G4), accepts rising stems up to 95 mm and has a 160 mm handwheel as stated in the data sheet. Approximate weight is 155 kg.
03What explosion protection does the AUMA SAREx 25.1 carry?
AUMA documents these standard ATEX markings for the AUMA SAREx 25.1: II 2G Ex db eb IIB T4 or T3 Gb, II 2G Ex h IIB T4 or T3 Gb and II 2D Ex tb IIIC T130 °C or T190 °C Db, with certificate TÜV 14 ATEX 7542 X. This covers gas group IIB; confirm temperature class T4 or T3 and the zone on the supplied nameplate and certificate.
04How often can the AUMA SAREx 25.1 start and what pulse times apply?
The data sheet gives the maximum starts per hour by speed band (8–11 rpm: 300; 4 and 5.6 rpm on request) and the pulse timing as: 100 ms (same direction); on reversal 275 ms at 4 rpm down to 130 ms at 11 rpm. An AMExC or ACExC control is needed to drive the actuator.
05Is Seven Star LLC a trusted supplier for AUMA products?
Yes. Seven Star LLC supplies genuine AUMA products across Oman and the GCC, so the AUMA SAREx 25.1 is supplied as genuine AUMA product with documentation and regional technical support.