- Automation & ControlView all 2,798 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: AUMA
AUMA GHT Heavy-Duty Worm Gearbox (Multi-Turn)
Description
Overview
The AUMA GHT is AUMA Riester’s heavy-duty worm gearbox for motor operation of industrial valves, including gate valves and globe valves, and of special valves and structures such as louvre dampers, stack dampers, diverters, weirs and sluice gates. With maximum output torques from 32,000 Nm to 120,000 Nm, it extends the AUMA multi-turn range far beyond the torque of a standalone actuator. The range comprises four sizes, GHT 320.3, GHT 500.3, GHT 800.3 and GHT 1200.3, each with defined reduction ratios and a matching AUMA SA multi-turn actuator.
In Oman and the GCC, Seven Star LLC proudly supplies the AUMA GHT to customers across the Sultanate of Oman and the wider GCC. Our team supports sizing of heavy-duty gearbox and actuator combinations for large gates, weirs and dampers.
Working Principle of the AUMA GHT
In the AUMA GHT, a worm shaft meshes with a bronze worm wheel. This worm gearing produces reduction ratios between roughly 10:1 and 20.5:1, converting the high-speed, low-torque rotation of a multi-turn actuator into the slow, high-torque rotation needed at the valve. Each size is designed with torque characteristics in accordance with EN ISO 22109 and delivers constant torque across 100 % of the travel in open–close duty. The gearbox is not self-locking, so the connected actuator or valve design must hold the position, and actuator sizing must be verified for long running times and high output speeds.
Direction of rotation is defined by the arrangement of the worm shaft: RR (worm shaft right, clockwise input gives clockwise output) is standard, and LL, RL and LR variants are available. Maximum input speed is 90 rpm. Output speeds depend on the actuator speed and ratio; for example, with a 50 Hz actuator at 4 to 90 rpm the AUMA GHT output ranges from about 0.3 to 9 rpm, as listed in the datasheet combination tables.
Engineering Design of the AUMA GHT
The housing of the AUMA GHT is cast iron (EN-GJL-250) as standard, with spheroidal cast iron (EN-GJS-400-15) as an option. The worm wheel is bronze. Input shafts are cylindrical with a parallel key to DIN 6885-1 and a second shaft end is available. Input mounting flanges for the multi-turn actuator are F25 to F40 according to EN ISO 5210, and the valve attachment is output drive type B as standard, with type C, A and AF as options. Input shaft diameters are 60 mm to 100 mm, valve shaft diameters up to 200 mm are possible, and gearbox weights range from 477 kg to 1,280 kg, including input shaft, output type B and standard lubricant.
Enclosure protection is IP68 (8 m head of water, up to 96 hours), corrosion protection is KS with a two-component iron-mica coating, and the standard colour is AUMA silver-grey. The ambient temperature range is −40 °C to +80 °C, with −60 °C to +60 °C and 0 °C to +120 °C options. The gearbox can be installed in any position. Duty classes follow EN ISO 22109: short-time duty S2 – 15 min for classes A and B (S2 – 30 min on request) and intermittent duty S4 – 25 %, class C, on request.
Key Features
The AUMA GHT is built for the largest valves and structures in water and power infrastructure:
- Four sizes with maximum output torques of 32,000 Nm, 50,000 Nm, 80,000 Nm and 120,000 Nm for very large valves and gates.
- Bronze worm wheel and cast iron housing for durable, shock-tolerant torque transmission.
- Torque characteristics according to EN ISO 22109 with constant torque across the full travel in open–close duty.
- Direct mounting of AUMA SA 25.1, SA 30.1, SA 35.1 and SA 40.1 multi-turn actuators through standard input flanges.
- Selectable direction of rotation RR, LL, RL or LR to suit the valve and actuator layout.
- Optional spheroidal cast iron housing and optional second input shaft end.
- IP68 enclosure and KS corrosion protection for outdoor, buried and flooded installations.
- Lifetime designed to meet or exceed the requirements of EN ISO 22109.
Industrial Applications
Very high torques appear on large sluice gates, weirs, stack and louvre dampers, diverters and big industrial gate valves. The AUMA GHT serves exactly this segment: raw-water intake gates and canal structures, cooling-water systems for power and desalination plants on the Batinah coast, large isolation valves on pipeline and pumping stations, and flue-gas and ventilation dampers in power and industrial facilities near Sohar and Duqm. In each case the gearbox allows a standard AUMA SA actuator to move a load that would otherwise need a custom drive.
In Oman and the GCC, Seven Star LLC supplies the AUMA GHT and the matching SA 25.1 to SA 40.1 actuators for utilities, EPC contractors and plant owners across Oman and the GCC, including projects in the Salalah and Sohar economic zones. Because each application is torque-critical, our team recommends confirming the valve torque, running time and duty class before selecting the size. For projects that combine the AUMA GHT with other drives or controls, Seven Star LLC also supplies the AUMA SA and GHT, the AUMA GK and the AUMA GS part-turn gearbox.
Technical Specifications
The table gives the main data of the AUMA GHT range according to the AUMA technical data sheet, available for download on this page.
| Parameter | Specification |
|---|---|
| Model | AUMA GHT 320.3, GHT 500.3, GHT 800.3, GHT 1200.3 |
| Max. output torque | 32,000 / 50,000 / 80,000 / 120,000 Nm |
| Reduction ratios | Approx. 10:1 to 20.5:1 depending on size |
| Valve attachment flange | F48 (GHT 320.3); F60 (GHT 500.3, 800.3, 1200.3), EN ISO 5210, output type B (C, A, AF optional) |
| Input mounting flange for actuator | F25 to F40, EN ISO 5210 |
| Suitable multi-turn actuators | AUMA SA 25.1, SA 30.1, SA 35.1, SA 40.1 |
| Max. input speed | 90 rpm |
| Weight | 477 kg to 1,280 kg |
| Materials | Cast iron EN-GJL-250 housing (EN-GJS-400-15 option); bronze worm wheel |
| Self-locking | No |
| Ambient temperature | −40 °C to +80 °C; options −60 °C to +60 °C and 0 °C to +120 °C |
| Enclosure / corrosion protection | IP68 / KS |
Request a Quote for AUMA GHT
To order the AUMA GHT, send us the required valve torque, the F-flange of the valve, the preferred reduction ratio and the SA actuator you plan to combine it with, particularly for sluice gates, weirs and dampers. Seven Star LLC will check the combination against the GHT technical datasheet linked on this page and return a formal RFQ response.
See also: AUMA GK Bevel Gearbox (Multi-Turn).
Datasheets & Documents
- Datasheet AUMA GHT 320.3 - GHT 1200.3 Technical Data Sheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
AUMA builds electric actuators for industrial valves, gates and dampers. The company was founded in 1964 near Stuttgart by Werner Riester and Rudolf Dinse, moved its headquarters to Müllheim in south-west Germany in the early 1970s, and still trades as the owner-managed AUMA Riester GmbH & Co. KG. Its actuators run isolation and control valves in water, power, oil and gas and process plants worldwide.
Seven Star LLC is an independent supplier listing AUMA multi-turn and part-turn actuators, actuator controls, gearboxes and spare parts for buyers in Oman and the GCC. We work from the nameplate data so that a replacement matches the installed actuator, controls and gearbox.
AUMA company profile
| Origin | Founded in 1964 by Werner Riester (engineering) and Rudolf Dinse (sales and finance); registered as Riester KG in Esslingen. Water and wastewater plants were the first customers. |
|---|---|
| Headquarters | Müllheim, Baden-Württemberg, Germany (since the early 1970s). Production in Germany, with further plants in India, the USA and China, and around 30 sales and service companies worldwide. |
| Ownership | Privately held, owner-managed company: AUMA Riester GmbH & Co. KG |
| Torque and thrust range | Multi-turn, part-turn and linear actuators from 1.5 Nm to 675,000 Nm with gearboxes, and linear thrust up to 217 kN, as published by AUMA |
| Design principle | Modular: actuator, integral controls and gearbox are combined to suit the valve, so one actuator size can serve open-close, modulating, fieldbus or explosion-proof duty |
Milestones
- 1964: Werner Riester and Rudolf Dinse found AUMA near Stuttgart; the first actuator range follows, with water and sewage plants as the first customers.
- Early 1970s: Lack of space in Nellingen leads to the move to Müllheim in south-west Germany.
- 1974: AUMA Benelux, the first foreign subsidiary, is founded.
- Today: About 2,800 employees worldwide, around 850 of them in Müllheim, according to AUMA.
AUMA actuator, controls and gearbox series
| Series | Type | Typical use |
|---|---|---|
| SA 07.2 to SA 16.2, SA 25.1 to SA 40.1 | Multi-turn actuators, open-close duty | Gate and globe valves, sluice gates and penstocks; SA 07.2 to 16.2 cover roughly 10 to 1,000 Nm, the .1 sizes go far higher |
| SAR 07.2 to SAR 30.1 | Multi-turn actuators, modulating duty | Control valves that receive a continuous position setpoint and many starts per hour |
| SAV, SARV, SQV, SQRV | Variable-speed actuators | Slow approach to the seat to limit water hammer, fast travel elsewhere |
| SQ 05.2 to SQ 14.2, SQR | Part-turn actuators | Ball, butterfly and plug valves and dampers, about 50 to 2,400 Nm; SQR for modulating duty; FQM fail-safe unit for spring-return action |
| SAEx, SAREx, SQEx, PROFOX-MX, TIGRON | Explosion-proof actuators | Hazardous areas in oil, gas and chemical plants, with ATEX and IECEx certified versions |
| AUMA MATIC AM, AUMATIC AC, ACExC 01.2, AMExC 01.1, AC 01.2-SIL | Integral actuator controls | AM for simple parallel wiring; AC for positioning, diagnostics and fieldbus (PROFIBUS DP, PROFINET, Modbus, FOUNDATION Fieldbus, HART depending on version); SIL version for safety functions |
| GS, GHE, SA + GS combination | Part-turn worm gearboxes | Large butterfly and ball valves, from GS 63.3 up to GS 630.3 at 675,000 Nm |
| GK, GST, GHT, GP | Multi-turn gearboxes (bevel, spur, worm, planetary) | Offset or right-angle drives and very high multi-turn torque |
| LE, SVC/SVCR, PROFOX-L | Linear actuators and thrust units | Globe and control valves with a rising stem, up to 217 kN |
| PROFOX-M, PROFOX-Q | Compact smart actuators | Small valves where a full SA or SQ is oversized |
| SA-UW, SGM/SGMR, SVM/SVMR, SAN/SARN | Special versions | Submerged valves, seawater-exposed ship and offshore duty, nuclear plant service |
| SIMA2 | Master station | Fieldbus network management for many actuators on one plant |
Where AUMA actuators are used
Water transmission and treatment is the largest use: pipeline isolation valves, pumping stations, desalination plants and sluice gates. AUMA actuators also run valves in power plant steam, feedwater and cooling systems, pipelines and tank farms, refineries and chemical plants, and on ships and offshore platforms. In the Gulf, check the ambient temperature rating, since actuators in direct sun can exceed 50 °C, and specify the enclosure protection for sand and humidity.
Ordering AUMA actuators and spare parts: what we need
For a replacement, send photos of the actuator, motor and controls nameplates: type designation, commission or order number, serial number and wiring diagram number. AUMA identifies the original build from the commission number. For a new actuator, add the valve type, required torque or thrust at the worst case, number of turns or swing angle, operating time, mounting flange to ISO 5210 or ISO 5211, stem or shaft dimensions, duty (open-close or modulating), supply voltage and frequency, control signals or fieldbus, and the hazardous-area marking required on site.
Facts checked against AUMA product information and the company history published by AUMA, October 2026.
Browse AUMA products by category: Valve Actuator, Industrial Communications.
FAQ
Questions about the AUMA GHT Heavy-Duty Worm Gearbox (Multi-Turn)
Answers from our engineering team on installation, compatibility and integration.
01What torque range does the AUMA GHT cover?
The GHT 320.3, 500.3, 800.3 and 1200.3 provide maximum output torques of 32,000 Nm, 50,000 Nm, 80,000 Nm and 120,000 Nm respectively, with reduction ratios of roughly 10:1 to 20.5:1.
02Which actuators are used with the AUMA GHT?
The gearboxes are combined with AUMA SA 25.1, SA 30.1, SA 35.1 and SA 40.1 multi-turn actuators mounted through standard EN ISO 5210 input flanges F25 to F40. The data sheet lists which actuator and ratio match each size.
03Is the AUMA GHT self-locking?
No. The GHT is not self-locking, so the combined actuator and valve design must provide position holding, and the actuator sizing must be verified for long running times and high output speeds.
04What valves and structures is the AUMA GHT intended for?
AUMA specifies it for industrial valves such as gate and globe valves and for special valves and structures including louvre dampers, stack dampers, diverters, weirs and sluice gates.
05Is Seven Star LLC a trusted supplier for AUMA products?
Yes. Seven Star LLC supplies genuine AUMA products across Oman and the GCC and supplies genuine AUMA gearboxes and actuators with local support.


















Reviews
There are no reviews yet.