Transducers & Accessories

NDT Accessories

NDT accessories are the supporting items an ultrasonic inspection depends on: couplant, calibration blocks, probe cables and delay line tips. Four Dakota NDT products are listed here at present: delay line tips for single element transducers, calibration blocks and probe cables for ultrasonic thickness gauges, and transducer wedges for angle beam inspection. Seven Star LLC is the agency for Dakota NDT in Oman and the GCC. These are small parts, but a worn tip or the wrong reference block will spoil readings from the best instrument.

Read the full category guide
  • 5 products
  • 2 brands
  • 3 sub-categories
NDT Accessories supplied by Seven Star LLC in Oman

1 product assigned directly to this category

Category guide

About NDT Accessories

5 products 2 brands 3 sub-categories

NDT accessories are the supporting items an ultrasonic inspection depends on: couplant, calibration blocks, probe cables and delay line tips. Four Dakota NDT products are listed here at present: delay line tips for single element transducers, calibration blocks and probe cables for ultrasonic thickness gauges, and transducer wedges for angle beam inspection. Seven Star LLC is the agency for Dakota NDT in Oman and the GCC.

These are small parts, but a worn tip or the wrong reference block will spoil readings from the best instrument.

Sub-groups of NDT accessories

  • Couplants: gels and liquids that carry sound from probe to part.
  • Calibration Blocks: step blocks and reference standards for setting zero, velocity and range.
  • Cables & Delay Lines: probe cables and the replaceable standoffs used on single element transducers.

Getting accessories that fit

Accessories are specific to the probe and instrument. A delay line tip must match the transducer’s thread and diameter, a cable must match both connectors, and a block must match the material under test. Order by the manufacturer’s part number where you can. Where you cannot, send the instrument and probe models and we check the documentation.

A growing list

The listing is short today. Couplants, further cables, probe holders and reference blocks for thickness gauges and flaw detectors can be sourced on request.

NDT accessories

Spare probes, cables, batteries, couplant, calibration blocks and cases keep ultrasonic and magnetic particle inspection equipment ready for work. Using accessories approved by the instrument manufacturer avoids compatibility problems and keeps measurement uncertainty within limits. For inspection campaigns and shutdowns, it is good practice to carry a second cable and probe for each instrument, since a damaged cable is one of the most common reasons work stops on site.

What to include in your inquiry

These details let us quote the right item the first time.

  • Material and thickness range
  • Application (corrosion survey, weld inspection, bolt tension)
  • Instrument model, when ordering probes or accessories
  • Transducer frequency and type
  • Standards the inspection must follow

Missing some of them? Send what you have. A nameplate photo or an old part number is enough to start.

Request a Quote for NDT Accessories

Looking for a specific model, part number or brand in NDT Accessories? Send us your requirements and quantities. Seven Star LLC sources genuine industrial equipment for customers across Oman and the GCC and replies with a formal quotation.

Free, no-obligation quotation · takes about 1 minute

Other enquiries: [email protected] · WhatsApp

FAQ

Questions about NDT Accessories

Common questions about selecting and sourcing NDT Accessories for projects in Oman and the GCC.

01Which accessories belong in a basic ultrasonic thickness kit?
Besides the gauge and probe, carry a step block in the material you inspect, couplant suited to the surface temperature, a spare probe cable if the cable is detachable, and spare delay line tips if you use delay line transducers. A wire brush or abrasive pad for surface preparation and a way to record locations complete the kit. Cables and tips are the parts that fail or wear first.
02Are NDT accessories interchangeable between brands?
Some are and some are not. Couplant and reference blocks are generic, provided the block material and dimensions suit your procedure. Cables are interchangeable only when both connector types match. Delay line tips, probe holders and anything that threads on to a transducer are specific to that transducer design. When in doubt send both part numbers and we will check them against the manufacturer documentation.
03How often should delay line tips be replaced?
There is no fixed interval. Replace a tip when the face is scratched, rounded or no longer flat, when the interface echo becomes distorted, or when the gauge will not zero properly. Tips used on rough surfaces wear much sooner. After fitting a new tip, apply fresh couplant between tip and transducer, tighten it as the manufacturer describes, and repeat the zero and calibration check.
04Do calibration blocks come with a certificate?
It depends on the block and the manufacturer. Many reference blocks are supplied with a certificate stating material and measured dimensions, and some can be ordered with traceable dimensional certification. If your procedure or client requires a specific certificate type or standard reference, tell us at inquiry stage. We provide the certificates the manufacturer issues for the item, on request.
05What details do you need to quote NDT accessories?
Give the make and model of the instrument and of the probe, the manufacturer's part number of the accessory if you have it, and the material you inspect. For cables add both connector types and the length. For blocks add material, thickness steps and any standard. For couplant add surface temperature and tell us if the material is stainless steel or a nickel alloy.