- Automation & ControlView all 2,614 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: AUMA
AUMA SA 07.2 Multi-Turn Actuator
Description
Overview
The AUMA SA 07.2 is the smallest frame size in AUMA’s SA multi-turn actuator range, purpose-built to automate gate valves, globe valves, and small ball or plug valves that require rotary, multi-turn operation. As part of AUMA’s long-established SA 07.2 to SA 16.2 platform, it combines a compact electric motor, worm gearing, and integral torque and position sensing in a single weatherproof housing, giving plant designers a proven, field-serviceable actuator for valve duties that do not require the higher torque output of AUMA’s larger SA frame sizes.
Backed by manufacturer datasheet documentation, Seven Star LLC proudly supplies the SA 07.2 multi-turn actuator to water treatment plants, oil and gas facilities, and industrial process sites across the Sultanate of Oman and the wider GCC. Each actuator is supplied on request, with the valve interface and control requirements confirmed at quotation before dispatch.
Operating Principle
The AUMA SA 07.2 converts the rotary output of its internal electric motor into the multi-turn rotary motion a gate or globe valve stem needs to travel from fully open to fully closed, using a worm gear stage to reduce motor speed to a usable output speed while multiplying torque. Integral torque-limiting switches protect the valve seat and stem from being over-torqued at the end of travel or in the event of an obstruction, while position sensing (mechanical or electronic, depending on the control option fitted) reports valve position back to the control system and stops the actuator precisely at the open and closed limits.
A declutchable handwheel allows the valve to be operated manually during commissioning, maintenance, or a power outage without needing to remove any part of the actuator, and the SA 07.2 automatically re-engages the electric drive train once the handwheel is disengaged, preventing an operator from accidentally leaving the valve on manual control. This combination of automatic torque protection and manual override is what makes multi-turn actuators of this design suitable for critical isolation valves where both remote automation and a manual fallback are required.
Engineering Design of the AUMA SA 07.2
The AUMA SA 07.2 is housed in a die-cast aluminum enclosure rated to IP68 as standard, allowing it to be installed outdoors, in pits, or in occasionally submerged locations without additional protection. The actuator mounts to the valve via a standard ISO 5210 or DIN 3210 output drive interface, with output drive type options (A, B, or similar) selected to match the valve’s stem design as either a rising or non-rising stem application.
Control options range from a basic actuator with torque and limit switches wired to a separate switchgear panel, up to an integrated AUMATIC or AUMA MATIC control unit mounted directly on the actuator, which adds local push-button control, a digital position/torque display, and Modbus, Profibus, or HART fieldbus communication back to the plant control system. Power supply options cover both single- and three-phase AC motors as well as DC-powered SAR variants for installations without a local AC supply, and the actuator’s terminal compartment is separated from the motor and gearing to simplify field wiring.
Key Features
The AUMA SA 07.2 is engineered as a rugged, field-proven actuator for small to medium multi-turn valve automation. Key features include:
- Tripping torque range of 10 to 30 Nm, sized for small gate, globe, and ball valve stems.
- Output speed options from 4 up to 180 rpm at 50 Hz to match valve stroke time requirements.
- IP68-rated die-cast aluminum housing suitable for outdoor, buried, or occasionally submerged installation.
- Declutchable handwheel for manual operation during commissioning, maintenance, or power loss.
- Integral torque-limiting and position/limit switching to protect the valve seat at travel end points.
- Compatibility with AUMATIC and AUMA MATIC integral controls for local display and fieldbus integration.
- ISO 5210 / DIN 3210 standard output drive interface for straightforward valve mounting.
- Single-phase, three-phase, and DC (SAR) motor variants to match available site power.
Industrial Applications
The AUMA SA 07.2 is widely used to automate isolation and control valves in water and wastewater treatment plants, district cooling networks, and utility distribution systems across Oman, where its compact torque range and IP68 housing suit both above-ground pipe racks and buried valve chambers. In oil and gas facilities and process plants throughout the GCC, the SA 07.2 is commonly specified on smaller bore gate and globe valves in utility and auxiliary systems, freeing larger AUMA SA frame sizes for the higher-torque main process isolation valves on the same site.
Working closely with plant engineers in the region, Seven Star LLC distributes the SA 07.2 multi-turn actuator to EPC contractors, valve automation packagers, and plant operators across the Sohar and Salalah economic zones, supplying both standalone actuators for existing valves and factory-mounted actuator-valve assemblies for new construction projects. Its declutchable handwheel and torque-limiting protection also make it a common retrofit choice for converting manually operated valves to remote control without replacing the valve body itself.
Technical Specifications
Key technical parameters of the AUMA SA 07.2 multi-turn actuator, the AUMA SA 07.2, are summarized below.
| Parameter | Specification |
|---|---|
| Model | AUMA SA 07.2 |
| Torque range | 10–30 Nm |
| Output speed | 4–180 rpm at 50 Hz (12 speeds) |
| Enclosure protection | IP68 (die-cast aluminum housing) |
| Output drive standard | ISO 5210 / DIN 3210 (flange options F07, F10) |
| Motor supply | Single-phase AC, three-phase AC, or DC (SAR variant) |
| Manual override | Declutchable handwheel |
| Protection features | Integral torque-limiting and position/limit switching |
| Control options | Basic switchgear wiring, AUMATIC, or AUMA MATIC integral control |
| Communication (with integral control) | Modbus, Profibus, or HART fieldbus |
Request a Quote for AUMA SA 07.2
Valve automation engineers and procurement teams in Oman and the GCC can request a formal quotation for the AUMA SA 07.2 multi-turn actuator directly from Seven Star LLC. We supply AUMA SA 07.2 actuators and control accessories on request with lead time confirmed at quotation, and our instrumentation division can advise on valve interface selection and control integration for your project. With fast quotation turnaround and technical support, Seven Star LLC is your single point of contact for genuine, factory-configured SA 07.2 actuators and full technical documentation.
Browse the full AUMA range or see more Valve Actuator products supplied by Seven Star LLC in Oman and the GCC.
Datasheets & Documents
- Datasheet AUMA SA 07.2 - SA 16.2 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
AUMA builds electric actuators for industrial valves, gates and dampers. The company was founded in 1964 near Stuttgart by Werner Riester and Rudolf Dinse, moved its headquarters to Müllheim in south-west Germany in the early 1970s, and still trades as the owner-managed AUMA Riester GmbH & Co. KG. Its actuators run isolation and control valves in water, power, oil and gas and process plants worldwide.
Seven Star LLC is an independent supplier listing AUMA multi-turn and part-turn actuators, actuator controls, gearboxes and spare parts for buyers in Oman and the GCC. We work from the nameplate data so that a replacement matches the installed actuator, controls and gearbox.
AUMA company profile
| Origin | Founded in 1964 by Werner Riester (engineering) and Rudolf Dinse (sales and finance); registered as Riester KG in Esslingen. Water and wastewater plants were the first customers. |
|---|---|
| Headquarters | Müllheim, Baden-Württemberg, Germany (since the early 1970s). Production in Germany, with further plants in India, the USA and China, and around 30 sales and service companies worldwide. |
| Ownership | Privately held, owner-managed company: AUMA Riester GmbH & Co. KG |
| Torque and thrust range | Multi-turn, part-turn and linear actuators from 1.5 Nm to 675,000 Nm with gearboxes, and linear thrust up to 217 kN, as published by AUMA |
| Design principle | Modular: actuator, integral controls and gearbox are combined to suit the valve, so one actuator size can serve open-close, modulating, fieldbus or explosion-proof duty |
Milestones
- 1964: Werner Riester and Rudolf Dinse found AUMA near Stuttgart; the first actuator range follows, with water and sewage plants as the first customers.
- Early 1970s: Lack of space in Nellingen leads to the move to Müllheim in south-west Germany.
- 1974: AUMA Benelux, the first foreign subsidiary, is founded.
- Today: About 2,800 employees worldwide, around 850 of them in Müllheim, according to AUMA.
AUMA actuator, controls and gearbox series
| Series | Type | Typical use |
|---|---|---|
| SA 07.2 to SA 16.2, SA 25.1 to SA 40.1 | Multi-turn actuators, open-close duty | Gate and globe valves, sluice gates and penstocks; SA 07.2 to 16.2 cover roughly 10 to 1,000 Nm, the .1 sizes go far higher |
| SAR 07.2 to SAR 30.1 | Multi-turn actuators, modulating duty | Control valves that receive a continuous position setpoint and many starts per hour |
| SAV, SARV, SQV, SQRV | Variable-speed actuators | Slow approach to the seat to limit water hammer, fast travel elsewhere |
| SQ 05.2 to SQ 14.2, SQR | Part-turn actuators | Ball, butterfly and plug valves and dampers, about 50 to 2,400 Nm; SQR for modulating duty; FQM fail-safe unit for spring-return action |
| SAEx, SAREx, SQEx, PROFOX-MX, TIGRON | Explosion-proof actuators | Hazardous areas in oil, gas and chemical plants, with ATEX and IECEx certified versions |
| AUMA MATIC AM, AUMATIC AC, ACExC 01.2, AMExC 01.1, AC 01.2-SIL | Integral actuator controls | AM for simple parallel wiring; AC for positioning, diagnostics and fieldbus (PROFIBUS DP, PROFINET, Modbus, FOUNDATION Fieldbus, HART depending on version); SIL version for safety functions |
| GS, GHE, SA + GS combination | Part-turn worm gearboxes | Large butterfly and ball valves, from GS 63.3 up to GS 630.3 at 675,000 Nm |
| GK, GST, GHT, GP | Multi-turn gearboxes (bevel, spur, worm, planetary) | Offset or right-angle drives and very high multi-turn torque |
| LE, SVC/SVCR, PROFOX-L | Linear actuators and thrust units | Globe and control valves with a rising stem, up to 217 kN |
| PROFOX-M, PROFOX-Q | Compact smart actuators | Small valves where a full SA or SQ is oversized |
| SA-UW, SGM/SGMR, SVM/SVMR, SAN/SARN | Special versions | Submerged valves, seawater-exposed ship and offshore duty, nuclear plant service |
| SIMA2 | Master station | Fieldbus network management for many actuators on one plant |
Where AUMA actuators are used
Water transmission and treatment is the largest use: pipeline isolation valves, pumping stations, desalination plants and sluice gates. AUMA actuators also run valves in power plant steam, feedwater and cooling systems, pipelines and tank farms, refineries and chemical plants, and on ships and offshore platforms. In the Gulf, check the ambient temperature rating, since actuators in direct sun can exceed 50 °C, and specify the enclosure protection for sand and humidity.
Ordering AUMA actuators and spare parts: what we need
For a replacement, send photos of the actuator, motor and controls nameplates: type designation, commission or order number, serial number and wiring diagram number. AUMA identifies the original build from the commission number. For a new actuator, add the valve type, required torque or thrust at the worst case, number of turns or swing angle, operating time, mounting flange to ISO 5210 or ISO 5211, stem or shaft dimensions, duty (open-close or modulating), supply voltage and frequency, control signals or fieldbus, and the hazardous-area marking required on site.
Facts checked against AUMA product information and the company history published by AUMA, October 2026.
Browse AUMA products by category: Valve Actuator, Industrial Communications.
FAQ
Questions about the AUMA SA 07.2 Multi-Turn Actuator
Answers from our engineering team on installation, compatibility and integration.
01What torque and speed range does the AUMA SA 07.2 cover?
The SA 07.2 delivers a tripping torque of 10 to 30 Nm at output speeds from 4 up to 180 rpm (50 Hz) depending on configuration, sizing it for small gate, globe, and ball valve stems rather than large main isolation valves.
02Does installing the SA 07.2 require shutting down valve operation?
The SA 07.2 includes a declutchable handwheel, so the valve remains manually operable during commissioning or a power outage, and once the electric drive is engaged the actuator automatically disengages manual control, minimizing operational downtime during installation.
03Which valve interfaces and sizes is the SA 07.2 compatible with?
The SA 07.2 mounts via the standard ISO 5210 or DIN 3210 output drive interface with F07/F10 flange options, and is compatible with rising and non-rising stem gate, globe, and small ball or plug valves within its torque range.
04Can the SA 07.2 integrate with an existing fieldbus control system?
Yes, when fitted with an AUMATIC or AUMA MATIC integral control unit, the SA 07.2 can communicate over Modbus, Profibus, or HART, allowing it to be integrated into most existing plant control and SCADA systems.
05Is Seven Star LLC an experienced supply partner for AUMA products?
Yes, Seven Star LLC is an experienced supplier of AUMA in Oman and the GCC, supplying genuine, factory-configured actuators with local technical and commissioning support.


















Reviews
There are no reviews yet.