Brand:

AUMA SGM-SGMR Seawater-Resistant Part-Turn Actuator

Description

Overview

The AUMA SGM-SGMR is the bronze-housed sibling of the SGC-SGCR: a “small” electric part-turn actuator range with integral controls, and a torque range from 25 Nm to 2,200 Nm. All housing components are made of bronze and all external screws are stainless steel, which AUMA states ensures complete resistance against seawater even over a longer time period. The SGM actuators are designed for open-close and positioning duty (classes A and B, short-time duty S2 – 15 min), the SGMR actuators for modulating duty (class C) S4 – 40 %. All parameters are set directly at the actuator, and the integral controls contain the switchgear, the power supply unit and the interface to the DCS.

In Oman and the GCC, Seven Star LLC proudly supplies the AUMA SGM-SGMR to shipbuilders, offshore operators, desalination plants and coastal industry in the Sultanate of Oman and across the GCC. For vessels, ports and plants along the Sea of Oman and the Arabian Sea, salt-laden air and direct seawater contact make material choice the deciding factor in service life, and the SGM-SGMR gives such sites a bronze actuator built for that environment with the convenience of integral controls.

Operating Principle

The AUMA SGM-SGMR drives the valve with a brushless, variable-speed motor through a compact gear stage. The operating time for 90 degrees can be set between 4 s and 90 s, and the swing angle is 82 to 98 degrees. Limit and torque seating are monitored inside the actuator, and a handwheel provides manual operation. AUMA describes internal speed control that protects the mechanics of both actuator and valve, and soft starts and stops that act gently on all mechanical components, which is important when a fast stroke is required but pressure surges and mechanical shock must be avoided.

The integral controls automatically switch the actuator off once the valve end position is reached, motor overheating is detected or a torque overload has occurred. Position feedback is available as a 4 – 20 mA signal or through a fieldbus interface, so the AUMA SGM-SGMR can be integrated into a conventional hard-wired system or into a networked control system. The SGMR version is sized for modulating duty at S4 – 40 %, so it can follow a setpoint continuously as a control valve actuator.

Engineering Design of the AUMA SGM-SGMR

AUMA’s marine documentation explains the benefits of the bronze housing: bronze is antimagnetic, which can be crucial for vessels that must avoid magnetic signature, it is non-combustible, it has a higher melting point than aluminium and actuators with bronze housings are seawater-resistant and do not require additional coating. The same documents describe five shock grades, including classification for submarines at 400 g and certification according to MIL-S-901D (NAVY). Always confirm the available shock grade for the project, because it is configured to the application. The AUMA SGM-SGMR product page lists high shock resistance among its service conditions.

Enclosure protection is IP68 and the ambient temperature range is −25 °C to +70 °C. The interface package comprises control inputs for different voltages (DC and AC), potential-free output contacts for status signalling and a fieldbus interface. Local controls can be installed separately from the actuator. The dimension sheets cover SGM and SGMR 04.1 to 10.1 (together with the SVM globe valve actuators of the same design) and SGM and SGMR 12.1 to 14.1, and electrical data sheets include versions for 115 V and 230 V AC controls and for 220 V DC motors.

Key Features

The AUMA SGM-SGMR is designed for corrosion-prone, shock-exposed environments. Its principal features are the following.

  • Bronze housing and stainless steel external screws for complete seawater resistance without additional coating.
  • Torque range of 25 Nm to 2,200 Nm with operating times for 90 degrees of 4 s to 90 s.
  • SGM for open-close and positioning duty (classes A and B, S2 – 15 min) and SGMR for modulating duty, class C, S4 – 40 %.
  • Integral controls with switchgear, power supply and DCS interface, set directly at the actuator.
  • Brushless, variable-speed motor with limit and torque seating and a swing angle of 82 to 98 degrees.
  • Position feedback of 4 – 20 mA or via fieldbus, with control inputs for different voltages (DC/AC).
  • High shock resistance, with shock grades and military certification available according to project requirements.
  • IP68 enclosure protection, handwheel for manual operation and optional separate local controls.

Industrial Applications

The AUMA SGM-SGMR is used wherever a valve actuator meets seawater or marine conditions: ship systems such as seawater cooling, ballast and fire-fighting circuits, naval and commercial vessels, offshore platforms, jetties and port facilities, and desalination and power plant intake and outfall systems. The antimagnetic, non-combustible and corrosion-resistant bronze housing also suits environments such as submarines and warships where those properties are specified, and the shock resistance is relevant wherever vibration or impact loads occur. Land-based users benefit from the same corrosion resistance in salt-laden coastal air.

In Oman and the GCC, Seven Star LLC distributes the AUMA SGM-SGMR for projects in the Sultanate of Oman and the GCC, including ports and shipyards at Sohar, Salalah and Duqm and coastal facilities around Muscat. For projects where separate controls are required, we can propose the AUMA SG2+MEC, and for weight-sensitive land installations the aluminium AUMA SGC-SGCR, so that each valve receives the actuator that suits its environment.

When reviewing the AUMA SGM-SGMR against the rest of the AUMA range, engineers often also look at the AUMA SGC-SGCR, AUMA SG2+MEC and AUMA SVM-SVMR.

Technical Specifications

The following table lists the key data published by AUMA for the AUMA SGM-SGMR range. Shock grade and certification depend on the project configuration and must be confirmed at order.

Parameter Specification
Model SGM / SGMR (SGM 04.1 – SGM 14.1, SGMR 04.1 – SGMR 14.1)
Duty type SGM: open-close and positioning, classes A and B, S2 – 15 min; SGMR: modulating, class C, S4 – 40 %
Torque range 25 Nm – 2,200 Nm
Operating time for 90° 4 s – 90 s
Swing angle 82° – 98°
Enclosure protection IP68
Ambient temperature −25 °C to +70 °C
Housing material Bronze, with stainless steel external screws
Motor Brushless, variable speed
Position feedback 4 – 20 mA or fieldbus interface
Control inputs Different voltages (DC/AC)
Outputs Potential-free status signalling contacts
Service conditions Seawater resistant, high shock resistance
Manual operation Handwheel

Request a Quote for AUMA SGM-SGMR

Send Seven Star LLC your valve type, required torque, duty type, supply voltage, shock requirement and interface preference to receive a formal RFQ response for the AUMA SGM-SGMR, together with stock and delivery information. The dimension sheet linked on this page helps your designers check the installation envelope. In Oman and the GCC, we support marine and coastal projects with supply on request and technical support with selection.

Datasheets & Documents
  • PDF Datasheet AUMA SGM 04.1 - SGMR 10.1 Dimension Sheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

AUMA builds electric actuators for industrial valves, gates and dampers. The company was founded in 1964 near Stuttgart by Werner Riester and Rudolf Dinse, moved its headquarters to Müllheim in south-west Germany in the early 1970s, and still trades as the owner-managed AUMA Riester GmbH & Co. KG. Its actuators run isolation and control valves in water, power, oil and gas and process plants worldwide.

Seven Star LLC is an independent supplier listing AUMA multi-turn and part-turn actuators, actuator controls, gearboxes and spare parts for buyers in Oman and the GCC. We work from the nameplate data so that a replacement matches the installed actuator, controls and gearbox.

AUMA company profile

Origin Founded in 1964 by Werner Riester (engineering) and Rudolf Dinse (sales and finance); registered as Riester KG in Esslingen. Water and wastewater plants were the first customers.
Headquarters Müllheim, Baden-Württemberg, Germany (since the early 1970s). Production in Germany, with further plants in India, the USA and China, and around 30 sales and service companies worldwide.
Ownership Privately held, owner-managed company: AUMA Riester GmbH & Co. KG
Torque and thrust range Multi-turn, part-turn and linear actuators from 1.5 Nm to 675,000 Nm with gearboxes, and linear thrust up to 217 kN, as published by AUMA
Design principle Modular: actuator, integral controls and gearbox are combined to suit the valve, so one actuator size can serve open-close, modulating, fieldbus or explosion-proof duty

Milestones

  • 1964: Werner Riester and Rudolf Dinse found AUMA near Stuttgart; the first actuator range follows, with water and sewage plants as the first customers.
  • Early 1970s: Lack of space in Nellingen leads to the move to Müllheim in south-west Germany.
  • 1974: AUMA Benelux, the first foreign subsidiary, is founded.
  • Today: About 2,800 employees worldwide, around 850 of them in Müllheim, according to AUMA.

AUMA actuator, controls and gearbox series

Series Type Typical use
SA 07.2 to SA 16.2, SA 25.1 to SA 40.1 Multi-turn actuators, open-close duty Gate and globe valves, sluice gates and penstocks; SA 07.2 to 16.2 cover roughly 10 to 1,000 Nm, the .1 sizes go far higher
SAR 07.2 to SAR 30.1 Multi-turn actuators, modulating duty Control valves that receive a continuous position setpoint and many starts per hour
SAV, SARV, SQV, SQRV Variable-speed actuators Slow approach to the seat to limit water hammer, fast travel elsewhere
SQ 05.2 to SQ 14.2, SQR Part-turn actuators Ball, butterfly and plug valves and dampers, about 50 to 2,400 Nm; SQR for modulating duty; FQM fail-safe unit for spring-return action
SAEx, SAREx, SQEx, PROFOX-MX, TIGRON Explosion-proof actuators Hazardous areas in oil, gas and chemical plants, with ATEX and IECEx certified versions
AUMA MATIC AM, AUMATIC AC, ACExC 01.2, AMExC 01.1, AC 01.2-SIL Integral actuator controls AM for simple parallel wiring; AC for positioning, diagnostics and fieldbus (PROFIBUS DP, PROFINET, Modbus, FOUNDATION Fieldbus, HART depending on version); SIL version for safety functions
GS, GHE, SA + GS combination Part-turn worm gearboxes Large butterfly and ball valves, from GS 63.3 up to GS 630.3 at 675,000 Nm
GK, GST, GHT, GP Multi-turn gearboxes (bevel, spur, worm, planetary) Offset or right-angle drives and very high multi-turn torque
LE, SVC/SVCR, PROFOX-L Linear actuators and thrust units Globe and control valves with a rising stem, up to 217 kN
PROFOX-M, PROFOX-Q Compact smart actuators Small valves where a full SA or SQ is oversized
SA-UW, SGM/SGMR, SVM/SVMR, SAN/SARN Special versions Submerged valves, seawater-exposed ship and offshore duty, nuclear plant service
SIMA2 Master station Fieldbus network management for many actuators on one plant

Where AUMA actuators are used

Water transmission and treatment is the largest use: pipeline isolation valves, pumping stations, desalination plants and sluice gates. AUMA actuators also run valves in power plant steam, feedwater and cooling systems, pipelines and tank farms, refineries and chemical plants, and on ships and offshore platforms. In the Gulf, check the ambient temperature rating, since actuators in direct sun can exceed 50 °C, and specify the enclosure protection for sand and humidity.

Ordering AUMA actuators and spare parts: what we need

For a replacement, send photos of the actuator, motor and controls nameplates: type designation, commission or order number, serial number and wiring diagram number. AUMA identifies the original build from the commission number. For a new actuator, add the valve type, required torque or thrust at the worst case, number of turns or swing angle, operating time, mounting flange to ISO 5210 or ISO 5211, stem or shaft dimensions, duty (open-close or modulating), supply voltage and frequency, control signals or fieldbus, and the hazardous-area marking required on site.

Facts checked against AUMA product information and the company history published by AUMA, October 2026.

FAQ

Questions about the AUMA SGM-SGMR Seawater-Resistant Part-Turn Actuator

Answers from our engineering team on installation, compatibility and integration.

01Why does the AUMA SGM-SGMR use a bronze housing?
All housing components are bronze and all external screws are stainless steel, which AUMA states ensures complete resistance against seawater even over a longer time period. Bronze is also antimagnetic and non-combustible, and does not need an additional coating.
02What is the difference between SGM and SGMR?
The SGM actuators are designed for open-close and positioning duty (classes A and B, S2 - 15 min). The SGMR actuators are designed for modulating duty, class C, S4 - 40 %.
03What torque and speed does the AUMA SGM-SGMR provide?
The torque range is 25 Nm to 2,200 Nm, the operating time for 90 degrees is 4 s to 90 s and the swing angle is 82 to 98 degrees.
04What is the difference between the AUMA SGM-SGMR and the AUMA SGC-SGCR?
Both have integral controls, brushless variable-speed motors and similar signals. The SGC-SGCR has an aluminium housing for low weight and covers 25 Nm to 1,000 Nm, while the SGM-SGMR has a bronze housing for seawater resistance and covers 25 Nm to 2,200 Nm.
05Is Seven Star LLC a trusted supplier for AUMA products?
Yes. Seven Star LLC supplies AUMA products to customers in Oman and the GCC and can provide the manufacturer documentation and technical support on request.