- Automation & ControlView all 2,462 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Non-Destructive Testing (NDT)
Transducers & Accessories
This category holds the ultrasonic transducers and NDT accessories that go with thickness gauges: dual element probes for corrosion work, single element transducers for precision gauging, replaceable delay line tips and calibration blocks. Everything listed is from Dakota NDT, and Seven Star LLC is the agency for Dakota NDT in Oman and the GCC. A gauge is only as good as the probe in front of it, so these parts deserve the same care in selection as the instrument.
Read the full category guide ↓- 10 products
- 3 brands
- 2 sub-categories

Browse Transducers & Accessories
2 sub-categoriesCategory guide
About Transducers & Accessories
10 products · 3 brands · 2 sub-categories
This category holds the ultrasonic transducers and NDT accessories that go with thickness gauges: dual element probes for corrosion work, single element transducers for precision gauging, replaceable delay line tips and calibration blocks. Everything listed is from Dakota NDT, and Seven Star LLC is the agency for Dakota NDT in Oman and the GCC.
A gauge is only as good as the probe in front of it, so these parts deserve the same care in selection as the instrument.
Ultrasonic transducers and NDT accessories listed
Ultrasonic Transducers contains the Dakota dual element, single element and shear wave probe families and bolt tension transducers. NDT Accessories contains delay line tips, calibration blocks, cables and angle beam wedges, with sub-groups for Couplants, Calibration Blocks, and Cables & Delay Lines. Only a few items are listed so far. Probes, cables and blocks for other instruments can be sourced on request against a part number.
Matching a transducer to the gauge and the job
Four things define a probe: element type, frequency, element diameter and connector. Lower frequencies penetrate thick or coarse-grained material. Higher frequencies resolve thin sections. Small diameters fit curved and tight surfaces. The gauge must also recognize the probe, so compatibility is checked per model.
What to send with your inquiry
Give the gauge make and model, the part number on the existing probe or cable, the material, thickness range and surface temperature.
Ultrasonic transducers and accessories for NDT
Transducers, delay lines, couplants, calibration blocks and cables are the consumable side of ultrasonic testing. The probe frequency, element size and type (contact, dual, delay line, angle beam) must match the material and the thickness or flaw size being measured, and connectors must suit the instrument. Calibration and reference blocks are used to verify gauge and flaw detector set-up against known thicknesses and reflectors. Keeping matched spares on site avoids downtime during inspection campaigns.
What to include in your inquiry
These details let us quote the right item the first time.
- Material and thickness range
- Application (corrosion survey, weld inspection, bolt tension)
- Instrument model, when ordering probes or accessories
- Transducer frequency and type
- Standards the inspection must follow
Missing some of them? Send what you have. A nameplate photo or an old part number is enough to start.
Brands in Transducers & Accessories
All brands →Most viewed in Transducers & Accessories
Request a Quote for Transducers & Accessories
Looking for a specific model, part number or brand in Transducers & Accessories? Send us your requirements and quantities. Seven Star LLC sources genuine industrial equipment for customers across Oman and the GCC and replies with a formal quotation.
- Genuine OEM products
- Supply across Oman & the GCC
- Formal quotation from our sales team
Free, no-obligation quotation · takes about 1 minute
Other enquiries: [email protected] · WhatsApp
FAQ
Questions about Transducers & Accessories
Common questions about selecting and sourcing Transducers & Accessories for projects in Oman and the GCC.
01What is the difference between a single element and a dual element transducer?
A single element transducer uses one crystal to transmit and receive. It gives good resolution on smooth, parallel surfaces and is the normal choice for precision gauging, often with a delay line. A dual element transducer has separate transmit and receive crystals, set at a slight angle behind an acoustic barrier. That arrangement handles rough, pitted back walls well, which is why it is standard for corrosion surveys.
02Can I use another manufacturer's probe on my thickness gauge?
Sometimes, but do not assume it. Thickness gauges apply probe-specific corrections, particularly the V-path correction for dual element probes, and many identify the probe automatically. A probe from another maker may connect physically and still read incorrectly. Send the gauge model and the probe you have in mind, and we will check the manufacturer's compatibility information before you buy.
03How do I choose the transducer frequency?
Frequency is a trade between penetration and resolution. Lower frequencies travel further through thick sections and attenuative materials such as cast iron or some plastics. Higher frequencies give sharper echoes and better resolution on thin material but are scattered more easily. Start from the material and the thickness range, then confirm the choice against the probe selection table in the gauge manufacturer's documentation.
04When do I need a delay line?
A delay line is a short plastic standoff in front of a single element crystal. It separates the transmit pulse from the echoes coming back from the part, which lets the gauge measure thin material that would otherwise be hidden in the initial pulse. Delay line tips wear with use and are replaced as consumable parts. Their length and diameter must match the transducer they are fitted to.
05Which reference block do I need for a thickness gauge?
A step block with several known thicknesses spanning your measuring range, made from the same material you inspect or one with very similar sound velocity. A block that only covers one thickness lets you set velocity but not check linearity across the range. Tell us the material, the thickness range and any standard your procedure cites for the block.




























