Brand:

Honeywell RAELink3 Z1 Wireless Modem with GPS

Description

Honeywell RAELink3 Z1 wireless modem with GPS

The Honeywell RAELink3 Z1 is a wireless modem that connects RAE Systems gas and radiation monitors to a PC running safety monitoring software. It combines a long-range 869 MHz radio, a GPS receiver and Bluetooth in one weatherproof, battery-powered unit, so that gas readings and the coordinates of each monitor appear on a local map at the command post.

The datasheet describes use with AreaRAE wireless detection systems and with portable monitors such as the MiniRAE 3000, ppbRAE 3000, UltraRAE 3000, MultiRAE Plus and GammaRAE II R. Seven Star LLC supplies the Honeywell RAELink3 Z1 in Oman and the GCC as an independent supplier in Muscat.

Understanding the RAELink3 Z1 name

RAELink3 is the third generation of the RAE Systems wireless modem, and the Z1 suffix marks the 869 MHz version, a licence-free ISM band, as listed in the datasheet. The companion RAELink3 modem for the 902 to 928 MHz band has its own datasheet, so the frequency band should be matched to the monitors and the regulations of the country where the system is used.

RAELink3 Z1 technical specifications

Parameter Specification
Manufacturer / part number Honeywell (RAE Systems) / RAELink3 Z1
Radio frequency 869 MHz licence-free ISM band; peak RF power +27 dBm ERP with 1.5 dBi antenna
Range Up to 3 kilometers
GPS Integrated, accuracy within 5 meters
Interfaces RS-232 or Bluetooth
Size and weight 12 cm x 8.65 cm x 4.7 cm without antenna (4.73 x 3.4 x 1.85 in); 490 g (17.3 oz)
Battery Rechargeable 7.4 V / 1650 mAh lithium-ion; up to 14 hours of continuous operation
Display and keys Backlit 128 x 64 LCD; three operation and programming keys
Environment –20 to +55 °C (–4 to +131 °F); 0 to 95 % RH non-condensing; IP-65
Safety certification listed ATEX II 2G EEx ib IIC T4
Operating modes Host modem, repeater or remote modem, set in the field
Kit contents Modem with GPS, Bluetooth and 869 MHz radio; whip antenna with TNC connector; antenna with 3.5 m cable and magnetic mount for host or repeater; charging adapter and power cable; hard transport case

How the RAELink3 Z1 builds a wireless detection network

One modem is set as the host and is connected to the PC with a cable or Bluetooth. Remote modems are attached to portable monitors, either by Bluetooth or through a serial cable, and transmit sensor readings and GPS positions to the host. Where the line of sight is poor, another modem can be configured as a repeater to extend the reach. A single RAELink3 Z1 can connect two devices using Bluetooth and a cable at the same time.

The display shows radio strength, so operators can reposition the antenna or the modem for a better link. Configuration is done in the field with the keypad and does not require special tools.

Where the RAELink3 Z1 fits and related Honeywell parts

The RAELink3 Z1 sits between the field monitors and the monitoring software. Typical partners are the AreaRAE Plus transportable monitor, the MultiRAE Pro PGM-6248, and PID instruments for VOCs. Newer MicroRAE and MultiRAE Pro units can use built-in wireless modules instead, so check whether your instruments need an external modem at all.

When planning a network, remember that the quoted 3 km is a best-case figure. Buildings, tanks, pipe racks and terrain reduce the usable distance, so a site walk with a test pair of modems is a sensible step before an incident or turnaround. Decide in advance which modem is the host, where the repeater will stand and who is responsible for charging. Record the modem roles and the radio channel settings in the site emergency plan so a replacement unit can be configured quickly.

Because the modem also reports GPS coordinates, the monitoring PC can plot each instrument on a map. This is helpful for fence-line surveys and for tracking where a worker or a portable detector was when an alarm occurred.

RAELink3 Z1 selection and ordering checklist

  • Frequency band and regulatory approval in the country of use; the Z1 version is for 869 MHz.
  • Number of modems: one host plus one remote modem per monitored instrument, and spares for repeaters.
  • Compatibility with the monitors and the software version in use.
  • Antenna options for host or repeater duty, and charging accessories.
  • Transport case and spare batteries for long deployments.

Deployment and maintenance of the RAELink3 Z1

Charge each modem fully, set its role, and confirm GPS lock before moving to the work site. Place the host antenna high and clear of metal structures for best range, which the datasheet gives as up to 3 km in good conditions. Bluetooth pairing with each monitor is done once and stored.

Keep contacts clean, protect the antenna connector and store the battery partially charged during long idle periods. The 14-hour runtime is a continuous figure, so plan battery swaps for extended deployments.

Typical applications of the RAELink3 Z1 in Oman and the GCC

Wireless modems of this type serve emergency response teams, industrial safety departments during plant turnarounds, perimeter and venue monitoring, and hazardous materials work. In the Gulf, large plant footprints and open desert sites make a 3 km radio link useful, while the IP-65 case copes with dust and heat. Any radio equipment must be checked against local frequency rules before use.

Information to send with an RFQ for the RAELink3 Z1

  • Quantity of modems and the planned network layout.
  • Monitors to be connected and their interface type.
  • Frequency band and regulatory requirements.
  • Accessories: antennas, cases, batteries.
  • Delivery location.

Documents and quotation

The Honeywell RAELink3 Z1 datasheet is attached on this page.

Send the monitor list and the network plan, and Seven Star LLC will quote the Honeywell RAELink3 Z1 modems.

Other Models in the Honeywell Portable Gas Range

Seven Star LLC supplies models from the Honeywell Portable Gas range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Honeywell BW MicroClip XL and X3 Four-Gas DetectorsFire & Gas DetectorsView details
Honeywell MultiRAE Pro PGM-6248 Portable Multi-Gas MonitorFire & Gas DetectorsView details
Honeywell MicroRAE Wireless Portable Four-Gas DetectorFire & Gas DetectorsView details
Honeywell AreaRAE Plus Transportable Multi-Gas Area MonitorFire & Gas DetectorsView details
Honeywell RAELink3 Z1 Wireless Modem with GPSFire & Gas DetectorsYou are viewing this model
Honeywell QRAE 3 Wireless Pumped or Diffusion Multi-Gas MonitorFire & Gas DetectorsView details
Datasheets & Documents
  • PDF Datasheet Honeywell RAELink3 Z1 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Honeywell is the American industrial technology group whose products on this site cover gas and flame detection, pressure transmitters, flow measurement, gas metering, fire alarm systems and helicopter rotor balancing equipment. Its roots go back to a thermostat business in Minneapolis in 1885 and to Mark Honeywell's heating company, which merged with it in 1927. Several brands we list have joined Honeywell over the years: Gent fire systems of Leicester (part of Honeywell since 2005), Chadwick-Helmuth (a Honeywell business unit from 2002) and Elster gas metering (acquired around the end of 2015).

Seven Star LLC is an independent supplier in Muscat. We list Honeywell gas detectors and sensors, transmitters, Elster gas meters and flow computers, Gent fire alarm equipment and Chadwick-Helmuth balancers, and supply them and their spares in Oman and the GCC by part number.

Honeywell company profile

Origins 1885, Minneapolis (Butz thermostat business); merged with Mark Honeywell's company in 1927
Brands in our range Honeywell Analytics gas detection, SmartLine transmitters, Elster gas metering, Gent fire detection, Chadwick-Helmuth rotor track and balance
Gent Founded in Leicester, UK, around 1872 by John Thomas Gent; part of Honeywell since 2005
Elster Gas, water and electricity metering; bought by Honeywell from Melrose, deal completed around the end of 2015

Milestones

  • 1885: The Butz thermostat business starts in Minneapolis.
  • 1927: It merges with Mark Honeywell's company.
  • 2005: Gent fire detection (Leicester, UK) becomes part of Honeywell.
  • 2015: Honeywell completes the purchase of Elster from Melrose around the end of the year.

Honeywell products we list

Family Models Typical use
Fixed gas detectors Searchline Excel, Searchline Excel Plus, 02104-N-XSSA, Sensepoint XCD RTD, Sensepoint XCD IR, XCD H2, Sensepoint XCL, Sensepoint XRL, OmniPoint, RAEGuard 2 PID Flammable, toxic and VOC gas detection in process areas
Sensors, flame detection and control SR-W-MP75C LEL sensor, SR-X2V O2 sensor, FS24X Plus flame detector, R4343E flame switch, System 57 card, 5704FS panel Replacement sensors, fire detection and gas detection control panels
Transmitters and flow SmartLine STG700, STG800, STR82D remote seal, VersaFlow Coriolis Process pressure and mass flow measurement
Elster gas metering Q.Sonic plus, TRZ2, Quantometer, RABO, IRM-3 DUO, EK280, EC 350, enCore FC1, enCore ZM1, gas-net F1, gas-net D2, GasLab Q2, USM display Gas meters, volume correction and fiscal flow computing
Gent fire alarm systems Vigilon Plus, Vigilon Compact Plus, Nano, Xenex, S-Quad detector, S-Cubed, ALD302 base, S4-34420 interfaces, loop card, repeat panel, mimic panel, XENS-850 call point, 74430 bell Addressable and conventional fire alarm systems in buildings and plants
Chadwick-Helmuth rotor track and balance 8500C, 8500C Plus, Vibrex 2000, Model 11, photocell system, printer, bracket, protractor Helicopter rotor track and balance and propeller balancing

Gas detection uses two basic approaches. Point detectors such as the Sensepoint XCD measure the gas at one location, with a catalytic or infrared sensor for flammable gas and an electrochemical cell for toxic gas such as H2S. Open path detectors such as the Searchline Excel send an infrared beam across an area up to a few hundred metres long and detect a gas cloud anywhere along it. Infrared sensors cannot be poisoned the way catalytic beads can, which matters on sites with silicones or H2S.

Where Honeywell products are used

In Oman and the GCC, Honeywell gas detectors protect wellheads, gas plants, refineries and tank farms. Elster meters and flow computers measure gas at city gate stations and in industry. Gent systems are installed in commercial buildings, hospitals and hotels, and Chadwick-Helmuth balancers are used by helicopter operators.

Ordering Honeywell products: what we need

Send the part number from the label (for example 02104-N-XSSA or SPXCDASMTXF). For gas detectors, add the gas, range, output and certification. For gas meters, add size (DN), flow range and pressure rating. For Gent equipment, add the panel type and loop protocol.

Facts checked against Honeywell press releases and SEC filings, and published histories of Gent and Chadwick-Helmuth, October 2026.

FAQ

Questions about the Honeywell RAELink3 Z1 Wireless Modem with GPS

Answers from our engineering team on installation, compatibility and integration.

01What is the Honeywell RAELink3 Z1?
It is a wireless modem with integrated GPS and Bluetooth that links RAE Systems monitors to safety monitoring software over a long-range 869 MHz radio.
02What range does the RAELink3 Z1 offer?
The datasheet quotes up to 3 kilometers, with a peak RF power of +27 dBm ERP using the 1.5 dBi antenna.
03Can it act as a repeater?
Yes. The modem can be programmed in the field as a host, a repeater or a remote modem.
04How long does the battery last?
The rechargeable 7.4 V 1650 mAh lithium-ion pack gives up to 14 hours of continuous operation.
05How does it connect to a monitor?
Through Bluetooth or an RS-232 serial cable, and one modem can integrate two devices using both Bluetooth and a cable.