Brand:

AUMA SA 10.2 Multi-Turn Electric Actuator

Description

Overview

AUMA SA 10.2 is a multi-turn electric actuator from AUMA’s NORM range, purpose-built for open-close and inching duty on gate, globe, and other rising-stem valves across the industrial process, water, and power sectors. As one frame size within the SA 07.2–SA 16.2 family, the SA 10.2 delivers an output torque range of roughly 40 to 120 Nm with twelve selectable output speeds, giving specifying engineers a single reliable actuator platform that scales from small isolation valves to medium-duty gate valves without changing manufacturer or control philosophy.

In Oman and the GCC, Seven Star LLC proudly supplies the AUMA SA 10.2 multi-turn actuator to industrial, water treatment, oil and gas, and power generation customers across Oman and the wider GCC. Every actuator supplied through Seven Star LLC is AUMA product with manufacturer documentation, correct wiring documentation, and access to local technical support – helping facility engineers and procurement teams in Muscat, Sohar, and Salalah specify the right AUMA SA 10.2.

Operating Principle

The AUMA SA 10.2 converts rotary output from an integral 3-phase AC asynchronous motor into precisely controlled multi-turn output at the valve stem, driving the valve open or closed through a reduction gear train sized for the actuator’s rated torque range. Because it is a multi-turn design rather than a part-turn actuator, the SA 10.2 is matched to rising-stem valves – gate and globe valves in particular – where the valve closure element travels linearly along a threaded stem as the actuator output shaft rotates, rather than pivoting through a quarter turn as with a ball or butterfly valve.

Internal limit switches stop the motor at the fully open and fully closed positions, while torque switches protect the valve seat and actuator gear train by cutting motor power if resistance exceeds the configured torque setpoint – critical protection on a gate valve where over-torquing at the seated position can damage the wedge or seat rather than simply stalling harmlessly. At output speeds up to 90 rpm at 50 Hz, the SA 10.2 is self-locking; the 125 and 180 rpm ratios are not self-locking, meaning the worm gear train holds the valve securely in position without back-driving from line pressure even with power removed, and a declutchable handwheel provides manual override for commissioning, maintenance, or a power outage.

Engineering Design of the AUMA SA 10.2

The actuator housing is rated IP68, giving reliable protection against dust ingress and temporary submersion, a specification that matters directly in Gulf coastal and offshore installations where humidity, salt-laden air, and periodic washdown are routine rather than exceptional operating conditions. Valve attachment follows the EN ISO 5210 standard with an F10 flange, a rising or non-rising stem bore, and a 200 mm diameter declutchable handwheel for local manual operation, so the SA 10.2 bolts directly onto standard multi-turn valve stem interfaces without custom adapter machining.

The complete unit weighs approximately 22–25 kg depending on the selected speed configuration, keeping it manageable for field installation and replacement without specialized lifting equipment on most valve sizes it serves. Integral limit and torque switching, combined with the standard AUMA terminal compartment, allows straightforward wiring into a motor control center or a local control station, and the same mechanical platform accepts AUMA’s modular control unit options for basic open-close duty through to full Profibus/Modbus fieldbus integration where the project calls for remote monitoring and control.

Key Features

The AUMA SA 10.2 pairs a compact, field-proven mechanical platform with the protection and control options that keep valve automation projects on schedule.

  • Output torque range of approximately 40 to 120 Nm covers small-to-medium gate, globe, and rising-stem valves in a single actuator frame size.
  • Twelve selectable output speed ratios, from 4 rpm up to 180 rpm at 50 Hz, allow the same actuator body to be matched precisely to valve stroking time requirements.
  • IP68 ingress protection rating supports outdoor, coastal, and periodically submerged installation without additional enclosures.
  • Integral limit and torque switching protects the valve seat and actuator gear train against over-travel and over-torque conditions.
  • Self-locking operation up to the actuator’s rated speed threshold holds valve position securely without back-driving when power is removed.
  • A 200 mm declutchable handwheel provides reliable manual override for commissioning, maintenance, and power-outage operation.
  • EN ISO 5210 F10 valve attachment interface allows direct mounting to standard multi-turn valve stems without custom adapters.
  • Compatible with AUMA’s modular control unit range, from basic local control stations to fieldbus-integrated remote automation.

Industrial Applications

Water and wastewater treatment plants, district cooling networks, and process utility systems across the Gulf specify actuators like the AUMA SA 10.2 on isolation gate valves, bypass lines, and chemical dosing valves where reliable open-close duty with dependable torque protection matters more than continuous modulating control. Oil and gas gathering stations and refinery utility systems also use the SA 10.2 frame size on smaller manual-turned valves being automated for remote operation, where its self-locking gear train and IP68 rating suit both indoor process areas and outdoor tank farms.

In Oman and the GCC, Seven Star LLC supplies the AUMA SA 10.2 actuator to EPC contractors, municipal utilities, and industrial end users throughout Oman and the wider GCC, including projects across the Sohar and Salalah economic zones where technical support with selection supports valve automation projects. Hospitality developments, hospital complexes, and commercial HVAC plants in Muscat also specify the SA 10.2 on building-services isolation valves where a compact, reliable multi-turn actuator with local manual override is preferred over larger frame sizes.

Technical Specifications

The table below summarizes the core specifications of the AUMA SA 10.2 multi-turn actuator as published in AUMA’s technical documentation.

Parameter Specification
Model AUMA SA 10.2
Actuator Type Multi-turn, open-close and inching duty
Torque Range Approximately 40–120 Nm (duty-dependent)
Output Speeds (50/60 Hz) 4/4.8 up to 180/216 rpm across twelve ratios
Motor Type 3-phase AC asynchronous, short-time duty S2-15 min
Ingress Protection IP68
Valve Attachment EN ISO 5210, F10 flange
Handwheel Diameter 200 mm, declutchable
Approximate Weight 22–25 kg (speed-dependent)
Switching Integral limit and torque switching
Self-Locking Up to 90 rpm at 50 Hz

Request a Quote for AUMA SA 10.2

Seven Star LLC invites facility engineers, procurement teams, and EPC contractors across Oman and the GCC to submit a formal RFQ for the AUMA SA 10.2 multi-turn electric actuator. Lead time and availability are confirmed at quotation for new-build valve automation and retrofit projects alike, and the full AUMA SA 10.2 technical datasheet is available on request for engineering review and specification packages. Our instrumentation division can also advise on torque sizing, control unit selection, and fieldbus integration options. In Oman and the GCC, Seven Star LLC supports every actuator supplied with dedicated regional technical support.

Browse the full AUMA range or see more Valve Actuator products supplied by Seven Star LLC in Oman and the GCC.

Datasheets & Documents
  • PDF Datasheet AUMA SA 10.2 Technical Data Sheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

AUMA builds electric actuators for industrial valves, gates and dampers. The company was founded in 1964 near Stuttgart by Werner Riester and Rudolf Dinse, moved its headquarters to Müllheim in south-west Germany in the early 1970s, and still trades as the owner-managed AUMA Riester GmbH & Co. KG. Its actuators run isolation and control valves in water, power, oil and gas and process plants worldwide.

Seven Star LLC is an independent supplier listing AUMA multi-turn and part-turn actuators, actuator controls, gearboxes and spare parts for buyers in Oman and the GCC. We work from the nameplate data so that a replacement matches the installed actuator, controls and gearbox.

AUMA company profile

Origin Founded in 1964 by Werner Riester (engineering) and Rudolf Dinse (sales and finance); registered as Riester KG in Esslingen. Water and wastewater plants were the first customers.
Headquarters Müllheim, Baden-Württemberg, Germany (since the early 1970s). Production in Germany, with further plants in India, the USA and China, and around 30 sales and service companies worldwide.
Ownership Privately held, owner-managed company: AUMA Riester GmbH & Co. KG
Torque and thrust range Multi-turn, part-turn and linear actuators from 1.5 Nm to 675,000 Nm with gearboxes, and linear thrust up to 217 kN, as published by AUMA
Design principle Modular: actuator, integral controls and gearbox are combined to suit the valve, so one actuator size can serve open-close, modulating, fieldbus or explosion-proof duty

Milestones

  • 1964: Werner Riester and Rudolf Dinse found AUMA near Stuttgart; the first actuator range follows, with water and sewage plants as the first customers.
  • Early 1970s: Lack of space in Nellingen leads to the move to Müllheim in south-west Germany.
  • 1974: AUMA Benelux, the first foreign subsidiary, is founded.
  • Today: About 2,800 employees worldwide, around 850 of them in Müllheim, according to AUMA.

AUMA actuator, controls and gearbox series

Series Type Typical use
SA 07.2 to SA 16.2, SA 25.1 to SA 40.1 Multi-turn actuators, open-close duty Gate and globe valves, sluice gates and penstocks; SA 07.2 to 16.2 cover roughly 10 to 1,000 Nm, the .1 sizes go far higher
SAR 07.2 to SAR 30.1 Multi-turn actuators, modulating duty Control valves that receive a continuous position setpoint and many starts per hour
SAV, SARV, SQV, SQRV Variable-speed actuators Slow approach to the seat to limit water hammer, fast travel elsewhere
SQ 05.2 to SQ 14.2, SQR Part-turn actuators Ball, butterfly and plug valves and dampers, about 50 to 2,400 Nm; SQR for modulating duty; FQM fail-safe unit for spring-return action
SAEx, SAREx, SQEx, PROFOX-MX, TIGRON Explosion-proof actuators Hazardous areas in oil, gas and chemical plants, with ATEX and IECEx certified versions
AUMA MATIC AM, AUMATIC AC, ACExC 01.2, AMExC 01.1, AC 01.2-SIL Integral actuator controls AM for simple parallel wiring; AC for positioning, diagnostics and fieldbus (PROFIBUS DP, PROFINET, Modbus, FOUNDATION Fieldbus, HART depending on version); SIL version for safety functions
GS, GHE, SA + GS combination Part-turn worm gearboxes Large butterfly and ball valves, from GS 63.3 up to GS 630.3 at 675,000 Nm
GK, GST, GHT, GP Multi-turn gearboxes (bevel, spur, worm, planetary) Offset or right-angle drives and very high multi-turn torque
LE, SVC/SVCR, PROFOX-L Linear actuators and thrust units Globe and control valves with a rising stem, up to 217 kN
PROFOX-M, PROFOX-Q Compact smart actuators Small valves where a full SA or SQ is oversized
SA-UW, SGM/SGMR, SVM/SVMR, SAN/SARN Special versions Submerged valves, seawater-exposed ship and offshore duty, nuclear plant service
SIMA2 Master station Fieldbus network management for many actuators on one plant

Where AUMA actuators are used

Water transmission and treatment is the largest use: pipeline isolation valves, pumping stations, desalination plants and sluice gates. AUMA actuators also run valves in power plant steam, feedwater and cooling systems, pipelines and tank farms, refineries and chemical plants, and on ships and offshore platforms. In the Gulf, check the ambient temperature rating, since actuators in direct sun can exceed 50 °C, and specify the enclosure protection for sand and humidity.

Ordering AUMA actuators and spare parts: what we need

For a replacement, send photos of the actuator, motor and controls nameplates: type designation, commission or order number, serial number and wiring diagram number. AUMA identifies the original build from the commission number. For a new actuator, add the valve type, required torque or thrust at the worst case, number of turns or swing angle, operating time, mounting flange to ISO 5210 or ISO 5211, stem or shaft dimensions, duty (open-close or modulating), supply voltage and frequency, control signals or fieldbus, and the hazardous-area marking required on site.

Facts checked against AUMA product information and the company history published by AUMA, October 2026.

FAQ

Questions about the AUMA SA 10.2 Multi-Turn Electric Actuator

Answers from our engineering team on installation, compatibility and integration.

01What is the output torque range of the AUMA SA 10.2?
The AUMA SA 10.2 delivers approximately 40 to 120 Nm of output torque as the adjustable tripping torque is set, making it suitable for small-to-medium gate, globe, and other rising-stem valves.
02How much does installation and commissioning downtime cost with the SA 10.2?
The SA 10.2 mounts directly to standard EN ISO 5210 F10 valve stem interfaces with no custom adapter machining, and its declutchable handwheel allows immediate manual operation during commissioning, minimizing installation downtime compared with actuators requiring custom mounting work.
03What valve stem sizes and materials is the SA 10.2 compatible with?
The SA 10.2 uses the EN ISO 5210 F10 flange with a standard rising or non-rising stem bore configuration, compatible with the stem sizes and materials used across most gate and globe valve manufacturers building to that same international standard.
04Can the SA 10.2 integrate with older relay-based control systems?
Yes. The SA 10.2 supports basic hard-wired open-close control through its integral terminal compartment for legacy relay-based systems, while also accepting AUMA modular control units for Profibus or Modbus fieldbus integration where the project requires it.
05Is Seven Star LLC a trusted supplier for AUMA products?
Yes. Seven Star LLC is the trusted supplier and regional supplier for AUMA in Oman and the GCC, supplying genuine product with local technical support.