AUMA SDL/SDG Electronic Variable-Speed Actuator
Overview: Precision Electronic Control for Demanding Modulating Duty
The AUMA SDL/SDG Electronic Variable-Speed Actuator is a linear valve actuator built around servomotor technology, engineered specifically for demanding control automation tasks – including installations in potentially explosive atmospheres. Unlike actuators that rely on fixed-speed AC motors and mechanical limit switches, the SDL/SDG platform uses electronic setting of torque and stroke with continuous function monitoring, delivering the high positioning accuracy that genuinely continuous modulating (ISO 22153 Class D) service requires.
As a trusted supplier of AUMA valve actuators, Seven Star LLC sources and supplies the SDL/SDG electronic variable-speed actuator to refineries, chemical plants, and process industries across Oman and the wider GCC. Because continuous modulating control valves in classified hazardous areas demand both precision and certified safety, Seven Star LLC helps engineering teams specify the correct SDL/SDG size for their control application.
Working Principle: Servomotor-Driven Continuous Modulation
The SDL/SDG actuator uses servomotor technology to achieve high positioning accuracy across continuous modulating duty, meaning the actuator is expected to reposition frequently and precisely across its full stroke range rather than simply cycling between open and closed end stops. A wear-free absolute position measurement system built into the actuator continuously tracks stem position without relying on mechanical limit switches that would otherwise wear over the high number of positioning cycles that continuous modulating service demands.
The actuator’s wide-range power supply unit accommodates varying site input voltage without requiring a separately matched transformer, and running speeds from 1.8 to 4 mm/s across actuator sizes 20 to 100 allow the platform to be matched to the specific process response time required. Electronic setting of torque and stroke, combined with continuous function monitoring, gives operators direct visibility into actuator health and performance that a purely mechanical actuator design cannot provide.
Engineering Design of the SDL/SDG Actuator
The SDL/SDG is rated IP67 with high enclosure protection and high-quality corrosion protection supporting wide ambient temperature ranges, and covers an actuator force range of 2 to 15 kN with strokes from 50 to 80 mm as standard, extendable across the actuator’s size 20 to 100 range. A handwheel provides manual operation, and a mechanical position indicator gives local visual confirmation of stem position independent of the electronic position measurement system.
Options for the SDL/SDG include an I/O module for intermediate position switches, local controls mounted at the actuator, and fieldbus control for direct digital integration with plant control systems. This combination of electronic precision and flexible control architecture makes the SDL/SDG a purpose-built solution for control loops that a standard fixed-speed actuator cannot serve adequately.
Key Features
The AUMA SDL/SDG Electronic Variable-Speed Actuator delivers precision continuous modulating control. Key characteristics include:
- Servomotor technology for high positioning accuracy in continuous modulating (Class D) duty.
- Wear-free absolute position measurement within the actuator, eliminating mechanical limit-switch wear.
- Actuator force range of 2 to 15 kN; stroke 50 to 80 mm; running speeds 1.8 to 4 mm/s.
- Wide-range power supply unit accommodating varying site input voltage.
- Explosion-proof rated for use in potentially explosive atmospheres.
- IP67 protection with high-quality corrosion protection and wide ambient temperature range.
- Optional I/O module for intermediate position switches, local controls, and fieldbus control.
Industrial Applications
The SDL/SDG actuator is deployed wherever a linear control valve requires genuinely continuous modulating positioning with high accuracy, including refinery process control loops, chemical dosing and blending systems, and other demanding automation tasks where valve position must track a control signal precisely and repeatedly. Its explosion-proof rating extends this capability into classified hazardous areas where such precision control is otherwise difficult to achieve safely.
Seven Star LLC supports refinery engineering teams, chemical plant operators, and EPC contractors across Oman, Muscat, Sohar, and the broader GCC region with sourcing of AUMA SDL/SDG electronic actuators, helping projects achieve precise continuous control in both standard and hazardous-area installations.
Technical Specifications
The table below summarizes the core specifications of the AUMA SDL/SDG Electronic Variable-Speed Actuator as supplied by Seven Star LLC.
| Parameter | Specification |
|---|---|
| Model | AUMA SDL/SDG Series (sizes 20 to 100) |
| Type | Electronic, servomotor-driven, linear/multi-turn actuator |
| Duty Rating | Continuous modulating (ISO 22153 Class D) |
| Actuator Force | 2 kN to 15 kN |
| Stroke | 50 mm to 80 mm |
| Running Speed | 1.8 to 4 mm/s |
| Protection Class | IP67 |
| Ambient Temperature | -20°C to +55°C |
| Explosion Protection | Rated for potentially explosive atmospheres |
| Position Measurement | Wear-free absolute position measurement |
Why Choose Seven Star LLC for Continuous Modulating Actuator Specification
True Class D continuous modulating duty is a genuinely different specification problem from open-close or even standard positioning service – an actuator undersized for the actual cycling frequency will wear out its position feedback and mechanical components far faster than its rated life would suggest, while an oversized SDL/SDG adds unnecessary cost to a loop that didn’t need servomotor-grade precision. Seven Star LLC’s engineers review the control loop’s actual response time and cycling frequency requirements with the customer before the SDL/SDG size is specified, confirming actuator force and stroke match the valve’s real duty rather than a generic modulating-service assumption. We also help refinery and chemical plant engineering teams across Oman plan fieldbus integration and local controls options, and coordinate delivery for precision dosing and blending control loops across Muscat, Sohar, and the broader GCC.
Request a Quote for AUMA SDL/SDG Electronic Variable-Speed Actuator
Seven Star LLC supplies the AUMA SDL/SDG electronic variable-speed actuator with full manufacturer documentation and regional technical support. Contact our instrumentation and valve automation division for a formal RFQ, to confirm the correct size and control interface for your modulating control application, or to obtain the complete technical datasheet. Seven Star LLC ensures every unit shipped across Oman and the GCC is genuine, correctly configured, and backed by local engineering support.
Related Products
- Datasheet AUMA SDL 05 - SDL 100 Datasheet Download
AUMA actuator and gearbox types
SA multi-turn actuators handle open-close duty on gate and globe valves, and SAR is the modulating version; the listing includes the SA 07.2, SA 10.2 and SA 25.1. SAEx and SAREx are the explosion-proof equivalents. Part-turn duty on ball and butterfly valves is covered by SQ and the modulating SQR, or by an SA actuator combined with a GS part-turn gearbox. LE linear thrust units convert multi-turn output to thrust, and GHT multi-turn gearboxes extend the torque range up to 120,000 Nm. PROFOX is the compact actuator line. Special items include the seawater-resistant SGM and SGMR part-turn actuators with bronze housings, the SVC and SVCR globe valve actuators and the FQM fail-safe unit. Integral controls come as AM or AC versions.Where AUMA electric actuators are used
AUMA actuators are found in water, power, oil and gas, marine and general industry. In practice that means isolation and control valves in water treatment and pumping stations, power plant steam and cooling systems, tank farms and pipelines, and sluice gates and dampers.Ordering AUMA actuators and parts: what we need
For a replacement send photos of the actuator, motor and controls nameplates: type, order number, serial number and wiring diagram number. For a new actuator we need:- valve type, required torque or thrust, and turns or stroke
- valve mounting flange and stem or shaft details
- output speed, duty (open-close or modulating)
- supply voltage and frequency, control signals or fieldbus
- enclosure protection, ambient temperature, Ex requirement
Browse AUMA products by category: Valve Actuator, Industrial Communications.
Reviews
There are no reviews yet.