Brand:

AUMA GK 14.2 Multi-Turn Bevel Gearbox, 250 Nm, F14

Description

AUMA GK 14.2: bevel gearing for 250 Nm valves

The AUMA GK 14.2 converts motor or hand drive into a right-angle output for valves up to 250 Nm, on an F14 flange. It is the second-smallest GK and the first whose input shaft can be ordered in 20 mm or 30 mm. Its mass is 15 kg. Because both ratios are above 1:1, the gearbox always multiplies the input torque, which means small multi-turn actuators can move valves that would otherwise need the next actuator size.

Ratios and torques

At 2:1 the factor is 1.8 and the nominal input torque limit is 139 Nm; at 2.8:1 the factor is 2.5 and the limit is 100 Nm. Modulating limits at the input are 66 Nm and 48 Nm respectively, against a modulating valve torque of 120 Nm. In practice a designer divides the valve torque by the factor, adds the 15 percent allowance for new gearboxes and checks the result against the actuator’s tripping range.

GK 14.2 datasheet summary

Parameter Value
Type GK 14.2, single-stage multi-turn bevel gearbox
Maximum valve torque, nominal 250 Nm
Maximum valve torque, modulating 120 Nm
Valve attachment F14 (EN ISO 5210), G1/2 (DIN 3210)
Reduction ratios 2:1 (factor 1.8) and 2.8:1 (factor 2.5)
Maximum input torque, nominal 139 Nm at 2:1, 100 Nm at 2.8:1
Maximum input torque, modulating 66 Nm at 2:1, 48 Nm at 2.8:1
Input shaft 20 mm standard, 30 mm option
Weight 15 kg
Gearbox type Bevel gearbox for multi-turn valves such as gate and globe valves
Duty Short-time duty S2-15 min (open-close); intermittent duty S4-25 percent (modulating)
Direction of rotation Clockwise at the input gives clockwise at the output drive
Input shaft Stainless steel, cylindrical with parallel key per DIN 6885.1; square option on request
Maximum input speed (motor operation) 240 rpm
Output drive types A, B1, B2, B3, B4 (EN ISO 5210); A, B, D, E (DIN 3210); C (DIN 3338)
Enclosure IP68 (8 m, 96 hours, up to 10 operations); modulating duty not possible while immersed
Ambient range Minus 40 to plus 80 degrees C; options minus 60 to plus 60 and 0 to plus 120
Explosion protection (standard) II 2G Ex h IIC T4 Gb and II 2D Ex h IIIC T130 degrees C Db (ATEX 2014/34/EU)
Coating Double-layer powder coating, silver-grey close to RAL 7037; KS corrosion protection

Pairing with actuators

The manufacturer’s combination table lists the GK 14.2 with SA 10.2 / SAR 10.2 on the F10 input flange, with a permissible actuator weight of 40 kg. Choose by the torque calculation, and also check that the actuator weight stays within the permitted limit.

Where the GK 14.2 is used

Examples include DN200 to DN350 gate valves in tank farms, hand-driven isolation valves relocated to platform level, and large globe valves in boiler plant. In Omani water transmission, the GK 14.2 lets a valve in a chamber be operated from a floor-level wheel. When fitted to an electric actuator, it allows the motor to be placed horizontally in a space-constrained pit.

How GK 14.2 differs from GK 10.2 and GK 16.2

GK 10.2 offers 120 Nm on F10 at 8.5 kg with ratios of 1:1 and 2:1. GK 14.2 doubles the capacity to 250 Nm, moves to F14 and weighs 15 kg, with 2:1 and 2.8:1. GK 16.2 reaches 1,000 Nm on F16 with a 30 mm input shaft. Select the GK 14.2 when valve torque is between about 120 and 250 Nm.

Handwheel and accessories

Handwheels follow EN 12570, with an aluminium wheel and ball handle as standard and a cast iron or lockable wheel as options. A WSH limit switching device can signal position. A GW 14.1 reversing gearbox changes the rotation direction when the valve and actuator geometry require it.

Environment and protection of the GK 14.2

The gearbox housing is protected to IP68 under AUMA’s definition: 8 m of water, up to 96 hours and up to 10 operations while immersed, with modulating duty excluded during immersion. The standard ambient range is minus 40 to plus 80 degrees C, with options of minus 60 to plus 60 and 0 to plus 120 degrees C. The coating is a two-component iron-mica combination in a double layer, in silver-grey close to RAL 7037, with KS corrosion protection. The manufacturer states that its multi-turn gearboxes meet or exceed the lifetime requirements of EN 15714-2.

Explosion protection and duty of the GK 14.2

Standard marking per ATEX 2014/34/EU is II 2G Ex h IIC T4 Gb and II 2D Ex h IIIC T130 degrees C Db, with options for T3 and T190 degrees C and for mining (I M2 Ex h I Mb). Duty is short-time S2-15 minutes for open-close service and intermittent S4-25 percent for modulating service. The input shaft is made of stainless steel with a parallel key per DIN 6885.1, and a square input can be offered for power tools; contact the manufacturer for the size.

Fill with the supplied grease; check the output sleeve bore before mounting; confirm direction of rotation (clockwise input gives clockwise output). The housing is IP68 and carries ATEX marking II 2G Ex h IIC T4 Gb. Inspect seals and housing for corrosion during plant turnarounds.

For GK 14.2 provide ratio, input shaft size, valve flange and the actuator type.

Documents and quotation

The manufacturer’s technical data for GK 14.2 is document Y000.330/003/en (issue 1.21), which we can attach to our reply, together with its dimension sheet if needed. Send an RFQ with the part number GK 14.2, the quantity, the reduction ratio, the actuator you intend to mount, the valve flange and output drive type and the input shaft form. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Ordering Checklist for the AUMA GK 14.2

Before you ask for a quotation for the AUMA GK 14.2, check the full order code on the nameplate of the unit you are replacing, the supply voltage, and the process or signal ranges your system expects. If this is an upgrade rather than a like-for-like swap, tell us the existing make and model so that mounting, wiring and connection details can be checked against the electric actuators already installed. For multi-unit orders, list the quantity per site and the delivery location in Oman or the wider GCC, so packing, paperwork and lead time can be confirmed in a single quotation.

Datasheets & Documents
  • PDF Datasheet AUMA GK 14.2 Multi-Turn Bevel Gearbox, 250 Nm, F14 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

AUMA builds electric actuators for industrial valves, gates and dampers. The company was founded in 1964 near Stuttgart by Werner Riester and Rudolf Dinse, moved its headquarters to Müllheim in south-west Germany in the early 1970s, and still trades as the owner-managed AUMA Riester GmbH & Co. KG. Its actuators run isolation and control valves in water, power, oil and gas and process plants worldwide.

Seven Star LLC is an independent supplier listing AUMA multi-turn and part-turn actuators, actuator controls, gearboxes and spare parts for buyers in Oman and the GCC. We work from the nameplate data so that a replacement matches the installed actuator, controls and gearbox.

AUMA company profile

Origin Founded in 1964 by Werner Riester (engineering) and Rudolf Dinse (sales and finance); registered as Riester KG in Esslingen. Water and wastewater plants were the first customers.
Headquarters Müllheim, Baden-Württemberg, Germany (since the early 1970s). Production in Germany, with further plants in India, the USA and China, and around 30 sales and service companies worldwide.
Ownership Privately held, owner-managed company: AUMA Riester GmbH & Co. KG
Torque and thrust range Multi-turn, part-turn and linear actuators from 1.5 Nm to 675,000 Nm with gearboxes, and linear thrust up to 217 kN, as published by AUMA
Design principle Modular: actuator, integral controls and gearbox are combined to suit the valve, so one actuator size can serve open-close, modulating, fieldbus or explosion-proof duty

Milestones

  • 1964: Werner Riester and Rudolf Dinse found AUMA near Stuttgart; the first actuator range follows, with water and sewage plants as the first customers.
  • Early 1970s: Lack of space in Nellingen leads to the move to Müllheim in south-west Germany.
  • 1974: AUMA Benelux, the first foreign subsidiary, is founded.
  • Today: About 2,800 employees worldwide, around 850 of them in Müllheim, according to AUMA.

AUMA actuator, controls and gearbox series

Series Type Typical use
SA 07.2 to SA 16.2, SA 25.1 to SA 40.1 Multi-turn actuators, open-close duty Gate and globe valves, sluice gates and penstocks; SA 07.2 to 16.2 cover roughly 10 to 1,000 Nm, the .1 sizes go far higher
SAR 07.2 to SAR 30.1 Multi-turn actuators, modulating duty Control valves that receive a continuous position setpoint and many starts per hour
SAV, SARV, SQV, SQRV Variable-speed actuators Slow approach to the seat to limit water hammer, fast travel elsewhere
SQ 05.2 to SQ 14.2, SQR Part-turn actuators Ball, butterfly and plug valves and dampers, about 50 to 2,400 Nm; SQR for modulating duty; FQM fail-safe unit for spring-return action
SAEx, SAREx, SQEx, PROFOX-MX, TIGRON Explosion-proof actuators Hazardous areas in oil, gas and chemical plants, with ATEX and IECEx certified versions
AUMA MATIC AM, AUMATIC AC, ACExC 01.2, AMExC 01.1, AC 01.2-SIL Integral actuator controls AM for simple parallel wiring; AC for positioning, diagnostics and fieldbus (PROFIBUS DP, PROFINET, Modbus, FOUNDATION Fieldbus, HART depending on version); SIL version for safety functions
GS, GHE, SA + GS combination Part-turn worm gearboxes Large butterfly and ball valves, from GS 63.3 up to GS 630.3 at 675,000 Nm
GK, GST, GHT, GP Multi-turn gearboxes (bevel, spur, worm, planetary) Offset or right-angle drives and very high multi-turn torque
LE, SVC/SVCR, PROFOX-L Linear actuators and thrust units Globe and control valves with a rising stem, up to 217 kN
PROFOX-M, PROFOX-Q Compact smart actuators Small valves where a full SA or SQ is oversized
SA-UW, SGM/SGMR, SVM/SVMR, SAN/SARN Special versions Submerged valves, seawater-exposed ship and offshore duty, nuclear plant service
SIMA2 Master station Fieldbus network management for many actuators on one plant

Where AUMA actuators are used

Water transmission and treatment is the largest use: pipeline isolation valves, pumping stations, desalination plants and sluice gates. AUMA actuators also run valves in power plant steam, feedwater and cooling systems, pipelines and tank farms, refineries and chemical plants, and on ships and offshore platforms. In the Gulf, check the ambient temperature rating, since actuators in direct sun can exceed 50 °C, and specify the enclosure protection for sand and humidity.

Ordering AUMA actuators and spare parts: what we need

For a replacement, send photos of the actuator, motor and controls nameplates: type designation, commission or order number, serial number and wiring diagram number. AUMA identifies the original build from the commission number. For a new actuator, add the valve type, required torque or thrust at the worst case, number of turns or swing angle, operating time, mounting flange to ISO 5210 or ISO 5211, stem or shaft dimensions, duty (open-close or modulating), supply voltage and frequency, control signals or fieldbus, and the hazardous-area marking required on site.

Facts checked against AUMA product information and the company history published by AUMA, October 2026.

FAQ

Questions about the AUMA GK 14.2 Multi-Turn Bevel Gearbox, 250 Nm, F14

Answers from our engineering team on installation, compatibility and integration.

01What is the valve torque limit of AUMA GK 14.2?
The maximum valve torque is 250 Nm for nominal duty and 120 Nm for modulating duty.
02Which ratios does GK 14.2 offer?
2:1 with factor 1.8 and 2.8:1 with factor 2.5.
03What input shaft sizes are possible for GK 14.2?
20 mm as standard, and 30 mm as an option.
04How heavy is GK 14.2?
15 kg, including the unbored output drive sleeve and the grease filling.
05What flange does GK 14.2 use?
F14 per EN ISO 5210 and G1/2 per DIN 3210.