Honeywell Chadwick-Helmuth Protractor (Blade Tracking Accessory)

Overview

The Honeywell Chadwick-Helmuth protractor is a measurement accessory used in the rotor blade tracking procedure, helping the maintenance crew measure the blade track position on helicopters. The protractor is part of the Chadwick-Helmuth track and balance accessory set that supports the 8500C and Vibrex analyzers.

The protractor is applied in the blade tracking phase of the balance procedure, where the operator measures the reference angles of the blade positions with the instrument and enters the values into the analyzer. The scale markings follow the Chadwick-Helmuth convention, so the recorded angles match the input format of the analyzer software. The instrument is stored in the analyzer kit with the tracking targets, keeping the complete track and balance set available at the aircraft for every run.

Engineering and Design

During rotor track and balance, the blade track is observed with the tracking target attached to the rotor head or with the stroboscopic method, and the protractor is used to measure the reference angles required for the adjustments. The instrument carries the Chadwick-Helmuth scale markings used in the standard track and balance procedure, so the recorded values match the input format of the analyzer software. The reading is entered into the analyzer together with the vibration data to compute the blade corrections.

The protractor is a precision mechanical instrument. It is typically stored in the analyzer kit with the tracking targets and the other accessories, so the complete track and balance set is available at the aircraft. Having a spare on hand avoids delaying the balance run when the original part is damaged.

In the track and balance procedure the protractor is used together with the tracking target and the stroboscopic reference: the operator measures the reference angles of the blade positions, and the values are entered into the analyzer with the vibration data. The scale markings follow the Chadwick-Helmuth convention, so the recorded angles match the analyzer software input format and no conversion is required. The protractor is stored in the analyzer kit with the tracking targets and adjustment tools, so the complete set is available at the aircraft, and MRO organisations working on several helicopter types can use it with the same analyzer across the fleet. Measured angles are recorded on the balance worksheet and archived with the reports to document each aircraft’s blade adjustment history.

Key Features

• Measurement accessory for blade tracking
• Compatible with 8500C and Vibrex tracking procedure
• Chadwick-Helmuth scale markings
• Precision mechanical construction

Applications

The protractor is used by helicopter maintenance crews performing rotor track and balance with the Chadwick-Helmuth analyzer family, both at the flight line and in the maintenance hangar.

Specifications

Why Seven Star LLC

Seven Star LLC supplies Chadwick-Helmuth track and balance accessories, including protractors, to helicopter maintenance organisations across Oman and the GCC. Our team can help you match the accessory to your analyzer kit. The blade tracking protractor is used to physically measure blade angle and track deviation as part of a rotor balancing procedure, so its accuracy directly affects the correction a technician applies, and our team can help confirm the correct variant for your rotor system rather than assuming a generic fit across different helicopter types.

For MRO facilities running track and balance procedures across a mixed fleet, we help plan accessory spares around your scheduled maintenance calendar, since a damaged or miscalibrated protractor can introduce measurement error into a procedure that is otherwise being performed correctly. If your facility is unsure whether an existing protractor is still reading accurately, we recommend a comparison check against a known reference before relying on it for a critical balancing procedure, and we are glad to advise on what that check should look like for your specific accessory, so a subtle measurement drift never quietly works its way into an otherwise correct balancing procedure and gets carried forward into the maintenance record as though nothing were wrong at all, undetected until the next real, careful inspection finally catches it weeks or even months later than it should have been caught.

Request a Quote for Honeywell Chadwick-Helmuth Protractor (Blade Tracking Accessory)

Submit a formal inquiry through our RFQ page with the protractor part number and your analyzer model. We will confirm the correct accessory and respond with a formal quotation. | Inquiry Form

Related Products

• IDS cards,RC8DA . 160050037
• ABB TTF300.S3.C.2.H.BF-C4.C Field-Mount Temperature Transmitter
• Normalab 60448 – Thermal Detection Thermocouple
• JUMO Wtrans T Wireless RTD Temperature Probe
• WIKA TR10 RTD Sensor
• Honeywell/Chadwick 10200

How Rotor Track and Balance Works

Rotor track and balance is the maintenance procedure that keeps helicopter main and tail rotor vibration within limits. Tracking makes sure every blade follows the same path as it rotates; balancing makes sure the rotor’s mass and aerodynamic forces are evenly distributed around the hub. The Chadwick-Helmuth analyzer measures vibration with accelerometers and blade position with an optical tracker or strobe system, and it calculates the corrections required: weights, pitch link adjustments or trim tab changes. Accessories such as the protractor support the mechanical side of the procedure, where angles have to be set or checked by hand on the aircraft.

Good Practice for Track and Balance Accessories

• Use the accessory specified in the analyzer manual and the aircraft maintenance manual for the helicopter type.
• Keep the protractor clean, store it in its case and protect the scale from impact and abrasion.
• Check the instrument before each use for damage to the scale and smooth movement of the arm.
• Record all readings on the track and balance worksheet so that the history of adjustments is available for the next inspection.