- Automation & ControlView all 2,716 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand
Brüel & Kjær
Brüel & Kjær is the Danish name behind two product lines found in industry: precision sound and acoustic instruments, such as the Type 2250 analyser and its measurement microphones, and machine protection and condition monitoring systems from Brüel & Kjær Vibro, such as VIBROCONTROL and VC-6000. Brüel & Kjær was founded in Denmark in 1942. Brüel & Kjær Vibro was formed in 2000 when it merged with the vibration business of Germany’s Schenck, and it has been part of Japan’s NSK since 2021. Seven Star LLC is an independent supplier in Muscat. We list Brüel & Kjær vibration sensors, monitors, rack modules and sound instruments, including obsolete modules that are still running in plants in Oman and the GCC, and supply them by exact part number.
Read the full brand profile ↓- 46 products
- 2 categories

Showing 1–24 of 46 products
Brand profile
About Brüel & Kjær
- Speciality
- Machine vibration monitoring systems
- Listed with us
- 46 products in 2 categories
Brüel & Kjær is the Danish name behind two product lines found in industry: precision sound and acoustic instruments, such as the Type 2250 analyser and its measurement microphones, and machine protection and condition monitoring systems from Brüel & Kjær Vibro, such as VIBROCONTROL and VC-6000. Brüel & Kjær was founded in Denmark in 1942. Brüel & Kjær Vibro was formed in 2000 when it merged with the vibration business of Germany’s Schenck, and it has been part of Japan’s NSK since 2021.
Seven Star LLC is an independent supplier in Muscat. We list Brüel & Kjær vibration sensors, monitors, rack modules and sound instruments, including obsolete modules that are still running in plants in Oman and the GCC, and supply them by exact part number.
Brüel & Kjær company profile
| Established | 1942, Denmark (Brüel & Kjær); Schenck, the German partner in B&K Vibro, dates from 1881 |
|---|---|
| B&K Vibro | Formed in 2000 from Brüel & Kjær’s and Schenck’s vibration businesses; sold by Spectris to NSK, completed in 2021, and now NSK’s condition monitoring unit |
| Product families | Eddy-current displacement sensors, velocity and acceleration sensors, vibration monitors, VC-6000 rack systems, sound level meters and analysers, measurement microphones and acoustic test equipment |
| Applications | Protection of turbines, compressors, pumps and fans; noise measurement and acoustic testing |
Milestones
- 1881: Schenck, later the German partner in B&K Vibro, is founded.
- 1942: Brüel & Kjær is founded in Denmark.
- 2000: B&K Vibro is formed from the vibration businesses of Brüel & Kjær and Schenck.
- 2021: Spectris completes the sale of B&K Vibro to NSK.
Brüel & Kjær products we list
| Family | Models | What it does |
|---|---|---|
| Eddy-current displacement probes and oscillators | IN-081, IN-083, SD-052, SD-081, DS-1051, DS-1053, OD-1051, OD-1053, OD-162 | Measure shaft vibration and axial position on machines with sleeve bearings |
| Velocity and acceleration sensors | VS-068, VS-069, AS-062, AS-063 | Measure casing vibration on pumps, fans, motors and gearboxes |
| VIBROCONTROL and compact monitors | VC-1000, VIBROCONTROL 1000 CV110, VC-1100, VC-868/1, VC-868/0, VC-920, AMO-622 | Alarm and trip on vibration limits for single machines |
| VC-6000 rack modules | SM-610-A01, SM-610-A02, SM-610-107, SM-610-113, CI-620, CI-615, PS-610, RC-610 rack | Multi-channel machine protection systems for turbines and compressors |
| Legacy modules | Type 3013 tacho monitor, PS-610 (replaced by PS-615) | Spares for older installed systems |
| Sound and acoustics | 2250-L, 2250-D, Type 2240, 4190 microphone, 4157 ear simulator | Noise surveys, occupational noise and acoustic testing |
| Cables | AC 0034, AO-0087, AO-0714, AO 0193 | Sensor, extension and microphone cables |
An eddy-current measuring chain has three parts that must match: the probe, the extension cable and the oscillator (driver). The total electrical length is calibrated as one system, so a probe from one length or model cannot simply be mixed with an oscillator for another. On B&K Vibro part numbers, the digits after the model (for example IN-083/3/070/50/0/206) set the thread, the probe length, the cable length and options, so the full code is needed to supply the right part.
Where Brüel & Kjær products are used
In Oman and the GCC, B&K Vibro sensors and monitors protect gas turbines, steam turbines, compressors, large pumps and fans in oil and gas, power and desalination plants. The sound instruments are used for occupational noise surveys and equipment noise testing.
Ordering Brüel & Kjær parts: what we need
Send the complete part number from the label (including all suffixes after the slash), a photo of the label, and for sensors the probe length, cable length and thread. For rack modules, add the rack type and firmware version if known. For obsolete parts, send the old part number so we can check the replacement.
Facts checked against NSK and Spectris announcements on Brüel & Kjær Vibro, October 2026.
Brüel & Kjær products by category
Most viewed Brüel & Kjær products
Request a Quote for Brüel & Kjær Products
Looking for Brüel & Kjær parts not listed here, or pricing for a project? Send us the part numbers and quantities. Seven Star LLC sources genuine Brüel & Kjær products for customers across Oman and the GCC and replies with a formal quotation.
- Genuine OEM products
- Supply across Oman & the GCC
- Formal quotation from our sales team
Free, no-obligation quotation · takes about 1 minute
Other enquiries: [email protected] · WhatsApp
FAQ
Questions about Brüel & Kjær
Common questions about Brüel & Kjær equipment, part numbers and supply to Oman and the GCC.
01Why does the suffix on an SM-610 module matter?
SM-610 is the module family, and the suffix after it, such as A02, 107, 113, 118, 123 or 139, identifies the particular version. Versions differ in their measuring task and configuration, so a module with a different suffix is not a safe substitute. Copy the full designation and the part number from the label of the module being replaced.
02Is Brüel & Kjær Vibro the same as Brüel & Kjær sound and vibration instruments?
They are different product lines. Brüel & Kjær Vibro makes permanently mounted machine monitoring and protection equipment, and some older units of this line carry the Schenck name. Measurement microphones, laboratory accelerometers and analyzers sold under the Brüel & Kjær name belong to a separate business. Tell us the type number and we will identify which line it is.
03What replaces an older VIBROCONTROL monitor that is no longer produced?
The answer depends on the model and how it is configured. We ask the manufacturer's documentation for the named successor and compare inputs, outputs and mounting with your unit. To do that we need the type designation, serial number, measuring span, sensor type and the relay and analog outputs in use. Where no direct successor exists we tell you so.
04How do I select a replacement velocity sensor such as the VS-068 or VS-069?
Match the type designation first, then check sensitivity, permitted mounting direction, temperature limits, cable length and connector, and the hazardous area approval if the machine is in a classified zone. The sensor also has to suit the input of the connected monitor. Send the sensor label and the monitor type and we check the pairing in the manufacturer's documentation.
05Is Seven Star LLC a distributor of Brüel & Kjær Vibro?
No. Seven Star LLC is an independent supplier that sources Brüel & Kjær Vibro modules, monitors and sensors through commercial channels. We check the type designation and part number against the manufacturer's documentation, propose the manufacturer's successor when a model is obsolete, and provide the datasheet and the certificates the manufacturer issues with the order on request.






















