- Automation & ControlView all 2,806 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: AUMA
AUMA SA with GS Part-Turn Gearbox, Base and Lever (to 45 kNm)
Description
AUMA SA multi-turn actuator with GS part-turn gearbox, base and lever
The AUMA SA with GS part-turn gearbox, base and lever combination operates valves that can only be driven through a lever arrangement, typically butterfly valves with limited space. A part-turn gearbox with base and lever is derived from the GS part-turn worm gearbox: it is converted by the combination with a base and a lever, and driven by an SA multi-turn actuator. The torque range of the combination is 350 Nm to 45,000 Nm. Seven Star LLC supplies AUMA products in Oman and the GCC as an independent supplier in Muscat.
Part-turn actuators with base and lever offer an ideal solution if valves can only be operated using a lever arrangement because of space constraints. Where higher torque is required, the SA multi-turn actuator is combined with the gearbox, base and lever.
Combination technical data
| Parameter | Specification |
|---|---|
| Manufacturer / part number | AUMA / SA multi-turn actuator with GS gearbox, base and lever |
| Torque range | 350 Nm to 45,000 Nm |
| Enclosure protection | IP68 |
| Corrosion protection | KS |
| Ambient temperature | -60 °C to +120 °C |
| ATEX marking listed | II 2G Ex h IIC (temperature class as printed on the page: T$ Gb), II 2D Ex h IIIC T130 °C Db |
| Electrical connection | AUMA plug/socket connector (terminals as alternative); various cable entries |
The ATEX line on the manufacturer page contains a typographical error in the temperature class, so the exact class must be taken from the certificate of the supplied unit.
Advantage of the base and lever design
The gearboxes are based on GS part-turn gearboxes, so a standard GS gearbox can be converted to the base-and-lever version. Because this conversion can be fitted retrospectively, the manufacturer points out benefits in warehousing: one stock of standard GS gearboxes can serve different valve mounting arrangements. The lever transfers the quarter-turn output to the valve linkage, which is helpful where a conventional flange mounting would collide with pipework or insulation.
Typical valves and installations
Typical uses are large butterfly valves in cooling water and seawater systems, damper and louvre drives and flap valves where the valve shaft is not accessible from the top. Large torque values up to 45,000 Nm cover big flap valves in power stations and desalination plants. The GS sizes used earlier in this catalogue (GS 63.3 up to GS 630.3) show how the torque range of the part-turn worm gearbox family grows.
Selection checklist for the base and lever combination
- Valve torque including breakaway and dynamic values
- Lever length and geometry, travel angle and linkage connection
- Mounting base position relative to the valve
- Required operating time, which determines actuator speed and gearbox ratio
- Actuator type: SA for open-close or SAR for modulating duty
- Controls type and electrical connection
- Ambient temperature and hazardous-area requirement
- Whether the gearbox is delivered new in this form or converted from a GS unit
Installation, setting and maintenance
The base is fixed to a rigid foundation and the lever linkage is adjusted until end positions of the valve and of the gearbox correspond. Mechanical end stops must be set first, followed by actuator limit and torque settings. Check lever play, bearing wear and lubrication at regular intervals, as the linkage moves under load. The handwheel on the actuator allows manual positioning during commissioning and in emergencies.
Applications in Oman and the GCC
Cooling-water intake and discharge valves at power and desalination plants, circulating water systems and large industrial dampers are the main candidates. Seawater, salt-laden air and heat call for suitable coatings, and the KS corrosion class with IP68 enclosure protection fits these conditions. Wide ambient limits mean the same combination can be listed for both hot and cold projects.
Related AUMA combinations
| Combination | Use |
|---|---|
| SA + GS | Multi-turn actuator on part-turn gearbox, standard flange mounting |
| SA + GS with base and lever | Lever-operated valves, 350 to 45,000 Nm |
| SA + GK / GST / GHT | Multi-turn gearbox combinations for gate and globe valves |
| SQ / SQR | Direct part-turn actuators, 50 to 2,500 Nm |
Understanding SA with GS base and lever torque and lever arm
For a lever-driven valve the torque at the valve shaft is the product of the force on the linkage and the lever arm. The torque range from 350 Nm to 45,000 Nm of the SA with GS base and lever combination is therefore a gearbox output rating; the linkage geometry, the stroke angle and the valve flap torque curve decide whether a particular size is adequate. Butterfly valves have a torque curve that rises toward the closed position because of seating friction, so a safety margin on the maximum value is wise. Provide the valve manufacturer torque data, with the differential pressure used for sizing, rather than an estimated figure.
Another point is the lever stroke. The output of a part-turn worm gearbox is typically adjusted to 90 degrees, and the linkage then converts this to the required valve movement. Confirm the final angle with the valve supplier, because over-travel on a lever linkage can bend components, and under-travel can leave the valve not fully closed.
Base and lever combination versus direct part-turn gearbox mounting
| Arrangement | Remarks |
|---|---|
| Direct flange mounting | Compact, no linkage, requires free space at the valve top flange |
| Base and lever | Used when only a lever can drive the valve; linkage needs space and maintenance |
| Part-turn actuator (SQ) | Self-contained quarter-turn drive up to 2,500 Nm, direct flange |
Information to send with an RFQ
- Valve data and linkage drawing
- Required torque and operating time
- Actuator type and supply voltage
- Controls and protocol
- Ambient temperature and Ex requirement
- Quantity and delivery location
Documents and quotation
Send the part number SA with GS base and lever, the application and the quantity, and Seven Star LLC will confirm which official documents are available for your configuration. Please do not rely on a general description alone: the order data, wiring diagram number and explosion-protection marking of the delivered unit are what count for engineering and commissioning.
Seven Star LLC is an independent supplier in Muscat serving customers across Oman and the GCC. Quotations are prepared against your enquiry data and are confirmed individually.
Datasheets & Documents
- Datasheet AUMA SA with GS base and lever Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
AUMA builds electric actuators for industrial valves, gates and dampers. The company was founded in 1964 near Stuttgart by Werner Riester and Rudolf Dinse, moved its headquarters to Müllheim in south-west Germany in the early 1970s, and still trades as the owner-managed AUMA Riester GmbH & Co. KG. Its actuators run isolation and control valves in water, power, oil and gas and process plants worldwide.
Seven Star LLC is an independent supplier listing AUMA multi-turn and part-turn actuators, actuator controls, gearboxes and spare parts for buyers in Oman and the GCC. We work from the nameplate data so that a replacement matches the installed actuator, controls and gearbox.
AUMA company profile
| Origin | Founded in 1964 by Werner Riester (engineering) and Rudolf Dinse (sales and finance); registered as Riester KG in Esslingen. Water and wastewater plants were the first customers. |
|---|---|
| Headquarters | Müllheim, Baden-Württemberg, Germany (since the early 1970s). Production in Germany, with further plants in India, the USA and China, and around 30 sales and service companies worldwide. |
| Ownership | Privately held, owner-managed company: AUMA Riester GmbH & Co. KG |
| Torque and thrust range | Multi-turn, part-turn and linear actuators from 1.5 Nm to 675,000 Nm with gearboxes, and linear thrust up to 217 kN, as published by AUMA |
| Design principle | Modular: actuator, integral controls and gearbox are combined to suit the valve, so one actuator size can serve open-close, modulating, fieldbus or explosion-proof duty |
Milestones
- 1964: Werner Riester and Rudolf Dinse found AUMA near Stuttgart; the first actuator range follows, with water and sewage plants as the first customers.
- Early 1970s: Lack of space in Nellingen leads to the move to Müllheim in south-west Germany.
- 1974: AUMA Benelux, the first foreign subsidiary, is founded.
- Today: About 2,800 employees worldwide, around 850 of them in Müllheim, according to AUMA.
AUMA actuator, controls and gearbox series
| Series | Type | Typical use |
|---|---|---|
| SA 07.2 to SA 16.2, SA 25.1 to SA 40.1 | Multi-turn actuators, open-close duty | Gate and globe valves, sluice gates and penstocks; SA 07.2 to 16.2 cover roughly 10 to 1,000 Nm, the .1 sizes go far higher |
| SAR 07.2 to SAR 30.1 | Multi-turn actuators, modulating duty | Control valves that receive a continuous position setpoint and many starts per hour |
| SAV, SARV, SQV, SQRV | Variable-speed actuators | Slow approach to the seat to limit water hammer, fast travel elsewhere |
| SQ 05.2 to SQ 14.2, SQR | Part-turn actuators | Ball, butterfly and plug valves and dampers, about 50 to 2,400 Nm; SQR for modulating duty; FQM fail-safe unit for spring-return action |
| SAEx, SAREx, SQEx, PROFOX-MX, TIGRON | Explosion-proof actuators | Hazardous areas in oil, gas and chemical plants, with ATEX and IECEx certified versions |
| AUMA MATIC AM, AUMATIC AC, ACExC 01.2, AMExC 01.1, AC 01.2-SIL | Integral actuator controls | AM for simple parallel wiring; AC for positioning, diagnostics and fieldbus (PROFIBUS DP, PROFINET, Modbus, FOUNDATION Fieldbus, HART depending on version); SIL version for safety functions |
| GS, GHE, SA + GS combination | Part-turn worm gearboxes | Large butterfly and ball valves, from GS 63.3 up to GS 630.3 at 675,000 Nm |
| GK, GST, GHT, GP | Multi-turn gearboxes (bevel, spur, worm, planetary) | Offset or right-angle drives and very high multi-turn torque |
| LE, SVC/SVCR, PROFOX-L | Linear actuators and thrust units | Globe and control valves with a rising stem, up to 217 kN |
| PROFOX-M, PROFOX-Q | Compact smart actuators | Small valves where a full SA or SQ is oversized |
| SA-UW, SGM/SGMR, SVM/SVMR, SAN/SARN | Special versions | Submerged valves, seawater-exposed ship and offshore duty, nuclear plant service |
| SIMA2 | Master station | Fieldbus network management for many actuators on one plant |
Where AUMA actuators are used
Water transmission and treatment is the largest use: pipeline isolation valves, pumping stations, desalination plants and sluice gates. AUMA actuators also run valves in power plant steam, feedwater and cooling systems, pipelines and tank farms, refineries and chemical plants, and on ships and offshore platforms. In the Gulf, check the ambient temperature rating, since actuators in direct sun can exceed 50 °C, and specify the enclosure protection for sand and humidity.
Ordering AUMA actuators and spare parts: what we need
For a replacement, send photos of the actuator, motor and controls nameplates: type designation, commission or order number, serial number and wiring diagram number. AUMA identifies the original build from the commission number. For a new actuator, add the valve type, required torque or thrust at the worst case, number of turns or swing angle, operating time, mounting flange to ISO 5210 or ISO 5211, stem or shaft dimensions, duty (open-close or modulating), supply voltage and frequency, control signals or fieldbus, and the hazardous-area marking required on site.
Facts checked against AUMA product information and the company history published by AUMA, October 2026.
Browse AUMA products by category: Valve Actuator, Industrial Communications.
FAQ
Questions about the AUMA SA with GS Part-Turn Gearbox, Base and Lever
Answers from our engineering team on installation, compatibility and integration.
01What is the torque range?
350 Nm to 45,000 Nm for the combination of SA multi-turn actuator and GS-based gearbox with base and lever.
02Why use a base and lever?
It operates butterfly or similar valves that can only be driven through a lever because of limited space.
03Can a standard GS gearbox be converted?
Yes. The gearboxes are based on GS part-turn gearboxes and can be converted by the combination with base and lever, also retrospectively.
04What are the environmental ratings?
IP68, corrosion protection KS and an ambient temperature range of -60 °C to +120 °C according to the page.
05Which actuators drive the combination?
SA multi-turn actuators are named; for modulating duty the SAR family is the usual extension.


















Reviews
There are no reviews yet.