Brand:

Honeywell STR745G SmartLine STR700 Remote Seal Gauge Transmitter

Description

Overview of the Honeywell STR745G

Honeywell STR745G is the gauge pressure model of the STR700 SmartLine remote diaphragm seal series. A single remote seal with capillary is fitted on the high side, and the transmitter is built on the STG74S base. The result is a 500 psig (35 bar) gauge pressure instrument that can measure viscous, hot, corrosive or sanitary media from a distance.

The range runs from minus 14.7 psig (minus 1.0 bar) up to 500 psig, with a minimum span of 5 psig (0.35 bar) and maximum turndown of 100:1. Reference accuracy is 0.075 percent of span for the standard version and a high-accuracy option of 0.040 percent.

STR745G remote seal highlights

  • Single remote diaphragm seal with capillary on the high-pressure side.
  • Standard accuracy 0.075 percent of span (A 0.005, B 0.060); high accuracy option B 0.035 giving 0.040 percent.
  • Reference turndown 20:1 with knee C of 25 psi (1.75 bar).
  • MAWP 500 psig (35 bar), or the seal rating if lower.
  • Base transmitter stability 0.020 percent of URL per year.
  • Remote mounting of the electronics away from heat and vibration.

Datasheet values for STR745G

Parameter Value
Model STR745G (STR700 SmartLine remote diaphragm seal, gauge)
Base transmitter STG74S
Upper / lower range limit 500 psig (35 bar) / -14.7 psig (-1.0 bar)
Minimum span 5 psig (0.35 bar); depends on seal size and capillary
Maximum turndown 100:1
Reference accuracy 0.075 percent of span standard (A 0.005, B 0.060); 0.040 percent high accuracy (B 0.035)
Reference turndown / knee C 20:1 / 25 psi (1.75 bar)
Temperature effect Not specified: capillary is on the high side only (see datasheet note 5)
MAWP 500 psig (35 bar)
Stability of base transmitter 0.020 percent of URL per year
Output / protocol Two-wire 4 to 20 mA with HART 7
Supply voltage and loop load 10.8 to 42.4 VDC at the terminals (intrinsically safe versions limited to 30 VDC); load 0 to 1,440 ohms
Seal diaphragm materials 316L stainless steel, Monel, Hastelloy C or tantalum
Seal gasket materials Viton, graphite or Teflon
Capillary Armored stainless steel or PVC-coated armored stainless steel; 5, 10, 15, 20, 25 or 35 ft (1.5, 3, 4.6, 6.1, 7.5 or 10.7 m); 2-inch close-coupled nipple available
Meter body fill fluid Silicone 200 (S.G. 0.94) or CTFE (S.G. 1.89)
Secondary fill fluid Silicone 704 (1.07), Syltherm 800 (0.90), NEOBEE M-20 (0.93) or silicone 200 / CTFE
Transportation and storage temperature -55 to 90 degC
Housing Polyester powder-coated low-copper aluminium, Type 4X / IP66 / IP67; dual-certified 316/316L stainless housing optional
Transmitter weight 8.3 lb (3.8 kg) with aluminium housing; total weight depends on the seal
Calibration verification Every four years

STR745G compared with the STR735D and other STR700 variants

The datasheet has an important caveat for this model. Because the capillary is on the high-pressure side only and the oil in it expands and contracts with temperature, a small unmeasured pressure appears at the sensor. For this reason no temperature performance is published for the STR745G, and the datasheet refers readers to the underlying base transmitters for reference values. The STR735D, with two balanced seals, does have a temperature specification.

Practical consequence: if your installation has large ambient swings between the process seal and the transmitter, select the shortest capillary and plan on a field zero trim at representative temperature. For tank level measurements with differential seals, use the STR735D instead.

Item STR745G STR735D
Measurement Gauge, single seal Differential, two seals
URL / LRL 500 / -14.7 psig 100 / -100 psid
Min span 5 psig 0.9 psid
Accuracy options 0.075 / 0.040 percent 0.075 percent

Pressure measurement with STR745G on difficult media in Oman and the GCC

The STR745G is used for line or vessel pressure of products that must not enter the transmitter: heavy fuel oil, asphalt, polymer melts, slurries, acids and chlorine-bearing solutions. In sanitary applications the sealed system keeps the process away from the transmitter, and in hot services the capillary keeps the electronics out of the heat.

Typical Omani uses include crude oil heaters, bitumen transfer lines, sulphur handling, and desalination brine concentrate lines where scaling blocks standard taps.

Choosing the seal and capillary for STR745G

Choose seal type and diaphragm material first; datasheet options include 316L stainless steel, Monel, Hastelloy C and tantalum diaphragms with Viton, graphite or Teflon gaskets. The minimum span for a single remote seal depends on diaphragm size and capillary length: for a 2.9-inch diaphragm direct mount is 8 psi and a 35 ft capillary 15 psi; for a 3.5-inch diaphragm it is 2 psi direct mount and 8 psi at 35 ft.

The 1.9-inch diaphragm is limited to 15 ft capillaries; the other sizes can reach 35 ft.

Commissioning the STR745G

Fit the seal to the process flange, ensure the gasket is compatible, and support the capillary so it does not sway. Mount the transmitter at the same elevation or note the offset and zero it out.

Check minimum supply voltage 10.8 VDC at the terminals, loop load up to 1,440 ohms, and use the display or HART configurator to set the range.

Maintenance and diagnostics

Inspect for diaphragm damage whenever the seal is removed, and avoid pushing on the diaphragm. Calibration verification every four years is suggested, but zero trim after any capillary relocation.

Frequently asked about STR745G

What is the Honeywell STR745G? It is a gauge pressure transmitter with one remote diaphragm seal in the STR700 SmartLine range, based on the STG74S.

What range does the STR745G cover? Minus 14.7 psig to 500 psig (minus 1.0 to 35 bar), minimum span 5 psig (0.35 bar), maximum turndown 100:1.

Why is no temperature specification published for the STR745G? The capillary is on the high side only and its oil expansion creates a small uncompensated pressure, so the datasheet does not specify it and points to the base transmitter.

What accuracy does the STR745G offer? 0.075 percent of span standard and a high-accuracy option of 0.040 percent.

Which seal materials are available for the STR745G? Seal diaphragms in 316L stainless steel, Monel, Hastelloy C or tantalum, with Viton, graphite or Teflon gaskets.

Documents and quotation

The STR700 specification 34-ST-03-124 documents the STR745G and the seal selection tables.

To obtain a quote for Honeywell STR745G, send part number, quantity, seal type and size, capillary length, fill fluid and approval to Seven Star LLC.

Other Models in the STR700 Range

Seven Star LLC supplies models from the STR700 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Honeywell STR735D SmartLine STR700 Remote Diaphragm DP TransmitterPressure TransmittersView details
Honeywell STR745G SmartLine STR700 Remote Seal Gauge TransmitterPressure TransmittersYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Honeywell STR745G SmartLine STR700 Remote Seal Gauge Transmitter Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Honeywell is the American industrial technology group whose products on this site cover gas and flame detection, pressure transmitters, flow measurement, gas metering, fire alarm systems and helicopter rotor balancing equipment. Its roots go back to a thermostat business in Minneapolis in 1885 and to Mark Honeywell's heating company, which merged with it in 1927. Several brands we list have joined Honeywell over the years: Gent fire systems of Leicester (part of Honeywell since 2005), Chadwick-Helmuth (a Honeywell business unit from 2002) and Elster gas metering (acquired around the end of 2015).

Seven Star LLC is an independent supplier in Muscat. We list Honeywell gas detectors and sensors, transmitters, Elster gas meters and flow computers, Gent fire alarm equipment and Chadwick-Helmuth balancers, and supply them and their spares in Oman and the GCC by part number.

Honeywell company profile

Origins 1885, Minneapolis (Butz thermostat business); merged with Mark Honeywell's company in 1927
Brands in our range Honeywell Analytics gas detection, SmartLine transmitters, Elster gas metering, Gent fire detection, Chadwick-Helmuth rotor track and balance
Gent Founded in Leicester, UK, around 1872 by John Thomas Gent; part of Honeywell since 2005
Elster Gas, water and electricity metering; bought by Honeywell from Melrose, deal completed around the end of 2015

Milestones

  • 1885: The Butz thermostat business starts in Minneapolis.
  • 1927: It merges with Mark Honeywell's company.
  • 2005: Gent fire detection (Leicester, UK) becomes part of Honeywell.
  • 2015: Honeywell completes the purchase of Elster from Melrose around the end of the year.

Honeywell products we list

Family Models Typical use
Fixed gas detectors Searchline Excel, Searchline Excel Plus, 02104-N-XSSA, Sensepoint XCD RTD, Sensepoint XCD IR, XCD H2, Sensepoint XCL, Sensepoint XRL, OmniPoint, RAEGuard 2 PID Flammable, toxic and VOC gas detection in process areas
Sensors, flame detection and control SR-W-MP75C LEL sensor, SR-X2V O2 sensor, FS24X Plus flame detector, R4343E flame switch, System 57 card, 5704FS panel Replacement sensors, fire detection and gas detection control panels
Transmitters and flow SmartLine STG700, STG800, STR82D remote seal, VersaFlow Coriolis Process pressure and mass flow measurement
Elster gas metering Q.Sonic plus, TRZ2, Quantometer, RABO, IRM-3 DUO, EK280, EC 350, enCore FC1, enCore ZM1, gas-net F1, gas-net D2, GasLab Q2, USM display Gas meters, volume correction and fiscal flow computing
Gent fire alarm systems Vigilon Plus, Vigilon Compact Plus, Nano, Xenex, S-Quad detector, S-Cubed, ALD302 base, S4-34420 interfaces, loop card, repeat panel, mimic panel, XENS-850 call point, 74430 bell Addressable and conventional fire alarm systems in buildings and plants
Chadwick-Helmuth rotor track and balance 8500C, 8500C Plus, Vibrex 2000, Model 11, photocell system, printer, bracket, protractor Helicopter rotor track and balance and propeller balancing

Gas detection uses two basic approaches. Point detectors such as the Sensepoint XCD measure the gas at one location, with a catalytic or infrared sensor for flammable gas and an electrochemical cell for toxic gas such as H2S. Open path detectors such as the Searchline Excel send an infrared beam across an area up to a few hundred metres long and detect a gas cloud anywhere along it. Infrared sensors cannot be poisoned the way catalytic beads can, which matters on sites with silicones or H2S.

Where Honeywell products are used

In Oman and the GCC, Honeywell gas detectors protect wellheads, gas plants, refineries and tank farms. Elster meters and flow computers measure gas at city gate stations and in industry. Gent systems are installed in commercial buildings, hospitals and hotels, and Chadwick-Helmuth balancers are used by helicopter operators.

Ordering Honeywell products: what we need

Send the part number from the label (for example 02104-N-XSSA or SPXCDASMTXF). For gas detectors, add the gas, range, output and certification. For gas meters, add size (DN), flow range and pressure rating. For Gent equipment, add the panel type and loop protocol.

Facts checked against Honeywell press releases and SEC filings, and published histories of Gent and Chadwick-Helmuth, October 2026.

FAQ

Questions about the Honeywell STR745G SmartLine STR700 Remote Seal

Answers from our engineering team on installation, compatibility and integration.

01What is the Honeywell STR745G?
It is a gauge pressure transmitter with one remote diaphragm seal in the STR700 SmartLine range, based on the STG74S.
02What range does the STR745G cover?
Minus 14.7 psig to 500 psig (minus 1.0 to 35 bar), minimum span 5 psig (0.35 bar), maximum turndown 100:1.
03Why is no temperature specification published for the STR745G?
The capillary is on the high side only and its oil expansion creates a small uncompensated pressure, so the datasheet does not specify it and points to the base transmitter.
04What accuracy does the STR745G offer?
0.075 percent of span standard and a high-accuracy option of 0.040 percent.
05Which seal materials are available for the STR745G?
Seal diaphragms in 316L stainless steel, Monel, Hastelloy C or tantalum, with Viton, graphite or Teflon gaskets.