Brand:

Honeywell STG775 SmartLine STG700 Gauge Pressure Transmitter

Description

STG775 at a glance

Honeywell STG775 is the high-pressure gauge transmitter in the standard STG700 range, with an upper limit of 3,000 psi (210 bar). It is aimed at services such as water injection, reverse osmosis feed pumps, hydraulic power units and high-pressure gas compression.

The 30 psi (2.1 bar) minimum span gives 100:1 maximum turndown, and the minus 14.7 psi lower limit means vacuum commissioning does not harm it. As with all SmartLine members, a piezoresistive sensor with integrated temperature compensation sits behind a modular electronics assembly. The STG775 maximum allowable working pressure is 3,000 psi (210 bar), equal to its range.

What stands out on the STG775

  • 3,000 psi (210 bar) upper range limit.
  • Reference turndown 8.5:1 and knee C of 350 psi (24.5 bar).
  • Temperature effect 0.075 plus 0.013 times URL over span per 28 degC.
  • Total performance 0.154 percent of span at 600 psi, 5:1 turndown.
  • No-burst pressure of 2.5 times MAWP plus 1,000 psi, because MAWP exceeds 2,000 psi.

STG775 specification table

Parameter Value
Model STG775 (STG700 SmartLine gauge pressure)
Upper range limit 3000 psi (210 bar)
Lower range limit -14.7 psi (-1.0 bar)
Minimum span 30 psi (2.1 bar)
Maximum turndown 100:1
Reference accuracy 0.065 percent of span (A 0.005, B 0.060)
Accuracy knee C 350 psi (24.5 bar)
Temperature effect 0.075 + 0.013 x URL/span, percent of span per 28 degC
Total performance example 0.154 percent of span at 600 psi
Stability 0.020 percent of URL per year, quoted over ten years
MAWP 3000 psi (210 bar)
Output / protocol Two-wire 4 to 20 mA with HART 7
Supply voltage and loop load 10.8 to 42.4 VDC at the terminals (intrinsically safe versions limited to 30 VDC); load 0 to 1,440 ohms
Response time 100 ms; turn-on time 2.5 s; damping 0 to 32 s, default 0.5 s
Rated ambient / meter body temperature -40 to 85 degC / -40 to 110 degC (operative limit 125 degC)
Overpressure 1.5 x MAWP of the model
Process connections Dual head: 1/2-inch NPT female. Inline: 1/2-inch NPT female or male, 9/16-18 high-pressure cone and thread female, G1/2-B male
Wetted diaphragm / head 316L stainless steel or Hastelloy C-276 diaphragm; heads in carbon steel (zinc plated), 316 SS or Hastelloy C-276 (dual head), 316L SS or Hastelloy C-276 (inline)
Fill fluid Silicone or CTFE
Housing Polyester powder-coated low-copper aluminium, Type 4X / IP66 / IP67; stainless housing optional
Net weight Dual head 8.3 lb (3.8 kg); inline 3.6 lb (1.6 kg), with aluminium housing

STG775 compared with the rest of the STG700 line

The STG775 is separated from the STG745 by a factor of six in range and by a reference turndown of 8.5:1 instead of 20:1. Against the STG78S at 6,000 psi (420 bar) and STG79S at 10,000 psi (690 bar), it has the better accuracy coefficients, since the STG78S and STG79S have temperature coefficients of 0.100 plus 0.070 and 0.200 plus 0.170 respectively.

Its twin, the STG77S, uses the same 3,000 psi range but carries a reference turndown of 8.5:1 and a heavier temperature coefficient of 0.100 plus 0.025, giving 0.234 percent total performance at 600 psi versus 0.154 percent for the STG775.

Model URL Knee C Total perf. at 600 psi
STG775 3000 psi (210 bar) 350 psi 0.154%
STG77S 3000 psi (210 bar) 400 psi 0.234%
STG78S 6000 psi (420 bar) 600 psi 0.455% at 1200 psi

Process situations suited to STG775

Typical applications in Oman include produced water injection pumps, chemical injection skids, wellhead test lines and hydraulic accumulator pressure monitoring on blow-out preventer panels. In water utilities the unit measures high-pressure membrane feed on seawater desalination trains, and in heavy industry hydraulic press circuits.

For machinery builders, the 100:1 turndown means one STG775 can be used as a spare for several lower-range tags if the process permits.

Fitting STG775 into an existing instrument list

Check that peak pressure, including pump dead-head conditions, stays under 3,000 psi. The inline process connection options include 9/16-18 high-pressure cone and thread female, a fitting style made for high-pressure service.

Process head materials for dual head versions are zinc-plated carbon steel, 316 SS or Hastelloy C-276; inline versions use 316L SS or Hastelloy C-276 heads.

Piping up and starting STG775

Use high-pressure tubing and fittings rated above 3,000 psi, vent the process line gradually, and leak-test with a bubble solution rather than hand tightening during pressure. Install a snubber if the pump pulsates strongly; otherwise raise the damping value.

Confirm the electrical supply of at least 10.8 VDC at the terminals and use a protective cover during hose-down washing.

Care, checks and spare modules

Verification every two years; at 3,000 psi, check the process connection for creep and replace seals at any disassembly. The meter body is individually characterised, so replace it only as a unit.

STG775: practical questions answered

What is the pressure range of the Honeywell STG775? The STG775 range is minus 14.7 psi to 3,000 psi (minus 1.0 to 210 bar), minimum span 30 psi (2.1 bar).

What accuracy applies to the STG775? Reference accuracy is up to 0.065 percent of span with 0.154 percent total performance at 600 psi.

What is the overpressure rating of the STG775? Overpressure is 1.5 times the model MAWP, with a no-burst pressure of 2.5 times MAWP plus 1,000 psi.

What connection options does the STG775 offer? Dual head versions use 1/2-inch NPT female; inline versions offer 1/2-inch NPT female or male, 9/16-18 cone and thread female, or G1/2-B male.

Which housing is standard for the STG775? The standard housing is polyester powder-coated low-copper aluminium rated Type 4X, IP66 and IP67.

Documents and quotation

Datasheet 34-ST-03-122 lists the STG775 specifications and is available on request.

To request a quotation for Honeywell STG775, send part number, quantity, range, connection style and approval label to Seven Star LLC.

Spares and Lifecycle Considerations

For critical service, many plants hold one Honeywell STG775 as an operational spare rather than waiting for a failure. When you plan spares, look at how many identical pressure transmitters units are installed, how long a replacement would take to arrive, and the cost of an unplanned stop. Store spare units in their original packaging in a dry, temperature-controlled area and record the part number and serial number in your maintenance system. We can quote single units or a small spares package and confirm the lead time for each item in writing.

Delivery to Sites in Oman and the GCC

Delivery of the Honeywell STG775 is arranged to suit the site, whether that is a plant in Sohar or Duqm, an oilfield location in the interior, or a project elsewhere in the GCC. Tell us the delivery point, any site access or gate-pass requirements, and the person who will receive the goods. Goods are packed to protect sensitive pressure transmitters equipment during road or air transport, and shipping details are shared once the order is dispatched so that your stores team can plan receipt and inspection.

Other Models in the STG700 Range

Seven Star LLC supplies models from the STG700 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Honeywell STG735 SmartLine STG700 Gauge Pressure TransmitterPressure TransmittersView details
Honeywell STG745 SmartLine STG700 Gauge Pressure TransmitterPressure TransmittersView details
Honeywell STG775 SmartLine STG700 Gauge Pressure TransmitterPressure TransmittersYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Honeywell STG775 SmartLine STG700 Gauge Pressure Transmitter Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Honeywell is the American industrial technology group whose products on this site cover gas and flame detection, pressure transmitters, flow measurement, gas metering, fire alarm systems and helicopter rotor balancing equipment. Its roots go back to a thermostat business in Minneapolis in 1885 and to Mark Honeywell's heating company, which merged with it in 1927. Several brands we list have joined Honeywell over the years: Gent fire systems of Leicester (part of Honeywell since 2005), Chadwick-Helmuth (a Honeywell business unit from 2002) and Elster gas metering (acquired around the end of 2015).

Seven Star LLC is an independent supplier in Muscat. We list Honeywell gas detectors and sensors, transmitters, Elster gas meters and flow computers, Gent fire alarm equipment and Chadwick-Helmuth balancers, and supply them and their spares in Oman and the GCC by part number.

Honeywell company profile

Origins 1885, Minneapolis (Butz thermostat business); merged with Mark Honeywell's company in 1927
Brands in our range Honeywell Analytics gas detection, SmartLine transmitters, Elster gas metering, Gent fire detection, Chadwick-Helmuth rotor track and balance
Gent Founded in Leicester, UK, around 1872 by John Thomas Gent; part of Honeywell since 2005
Elster Gas, water and electricity metering; bought by Honeywell from Melrose, deal completed around the end of 2015

Milestones

  • 1885: The Butz thermostat business starts in Minneapolis.
  • 1927: It merges with Mark Honeywell's company.
  • 2005: Gent fire detection (Leicester, UK) becomes part of Honeywell.
  • 2015: Honeywell completes the purchase of Elster from Melrose around the end of the year.

Honeywell products we list

Family Models Typical use
Fixed gas detectors Searchline Excel, Searchline Excel Plus, 02104-N-XSSA, Sensepoint XCD RTD, Sensepoint XCD IR, XCD H2, Sensepoint XCL, Sensepoint XRL, OmniPoint, RAEGuard 2 PID Flammable, toxic and VOC gas detection in process areas
Sensors, flame detection and control SR-W-MP75C LEL sensor, SR-X2V O2 sensor, FS24X Plus flame detector, R4343E flame switch, System 57 card, 5704FS panel Replacement sensors, fire detection and gas detection control panels
Transmitters and flow SmartLine STG700, STG800, STR82D remote seal, VersaFlow Coriolis Process pressure and mass flow measurement
Elster gas metering Q.Sonic plus, TRZ2, Quantometer, RABO, IRM-3 DUO, EK280, EC 350, enCore FC1, enCore ZM1, gas-net F1, gas-net D2, GasLab Q2, USM display Gas meters, volume correction and fiscal flow computing
Gent fire alarm systems Vigilon Plus, Vigilon Compact Plus, Nano, Xenex, S-Quad detector, S-Cubed, ALD302 base, S4-34420 interfaces, loop card, repeat panel, mimic panel, XENS-850 call point, 74430 bell Addressable and conventional fire alarm systems in buildings and plants
Chadwick-Helmuth rotor track and balance 8500C, 8500C Plus, Vibrex 2000, Model 11, photocell system, printer, bracket, protractor Helicopter rotor track and balance and propeller balancing

Gas detection uses two basic approaches. Point detectors such as the Sensepoint XCD measure the gas at one location, with a catalytic or infrared sensor for flammable gas and an electrochemical cell for toxic gas such as H2S. Open path detectors such as the Searchline Excel send an infrared beam across an area up to a few hundred metres long and detect a gas cloud anywhere along it. Infrared sensors cannot be poisoned the way catalytic beads can, which matters on sites with silicones or H2S.

Where Honeywell products are used

In Oman and the GCC, Honeywell gas detectors protect wellheads, gas plants, refineries and tank farms. Elster meters and flow computers measure gas at city gate stations and in industry. Gent systems are installed in commercial buildings, hospitals and hotels, and Chadwick-Helmuth balancers are used by helicopter operators.

Ordering Honeywell products: what we need

Send the part number from the label (for example 02104-N-XSSA or SPXCDASMTXF). For gas detectors, add the gas, range, output and certification. For gas meters, add size (DN), flow range and pressure rating. For Gent equipment, add the panel type and loop protocol.

Facts checked against Honeywell press releases and SEC filings, and published histories of Gent and Chadwick-Helmuth, October 2026.

FAQ

Questions about the Honeywell STG775 SmartLine STG700 Gauge Pressure

Answers from our engineering team on installation, compatibility and integration.

01What is the pressure range of the Honeywell STG775?
The STG775 range is minus 14.7 psi to 3,000 psi (minus 1.0 to 210 bar), minimum span 30 psi (2.1 bar).
02What accuracy applies to the STG775?
Reference accuracy is up to 0.065 percent of span with 0.154 percent total performance at 600 psi.
03What is the overpressure rating of the STG775?
Overpressure is 1.5 times the model MAWP, with a no-burst pressure of 2.5 times MAWP plus 1,000 psi.
04What connection options does the STG775 offer?
Dual head versions use 1/2-inch NPT female; inline versions offer 1/2-inch NPT female or male, 9/16-18 cone and thread female, or G1/2-B male.
05Which housing is standard for the STG775?
The standard housing is polyester powder-coated low-copper aluminium rated Type 4X, IP66 and IP67.