- Automation & ControlView all 2,749 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Yokogawa
Yokogawa YTA70P DIN Rail Mount HART Temperature Transmitter
Description
Yokogawa YTA70P DIN Rail Mount HART Temperature Transmitter: overview
The Yokogawa YTA70P is a DIN rail mount temperature transmitter that accepts thermocouple, RTD, ohm or millivolt inputs and converts them to a two-wire 4 to 20 mA signal with HART 7. It is meant for marshalling cabinets, junction boxes and control panels where the sensor wiring comes straight into the cabinet.
Seven Star LLC lists the Yokogawa YTA70P for engineers, maintenance planners and procurement teams in Oman and across the GCC who need to replace an installed unit, extend a loop or specify a new instrument for an oil and gas, utility, water or manufacturing project. The page below summarizes the key facts from the manufacturer datasheet so that a first technical review can be done before the full document is opened.
Key features of the YTA70P
- YTA70P converts thermocouple, RTD, ohm or millivolt inputs into a two-wire 4 to 20 mA signal.
- Input and output are isolated to 1500 V AC.
- Programmable response time of 1 to 60 seconds to smooth noisy sensors.
- Cold junction compensation accuracy of plus or minus 1 C for thermocouple inputs.
- Polycarbonate enclosure with M3 screw terminals and DIN rail mounting.
- EMC conformity to EN 61326-1 Class A and compliance with the EU RoHS directive.
YTA70P technical specifications
The same input table applies as for the YTA70 head-mount sibling, with thermocouple types B, E, J, K, N, R, S, T, L, U and others, Pt100 RTDs and mV or ohm inputs. A maximum zero offset of plus or minus 50% of the selected maximum value is allowed, and the lead wire resistance limit is 5 ohm per wire, with up to 50 ohm per wire configurable at reduced accuracy.
HART revision 7 brings long tag numbers of up to 32 characters, enhanced burst mode, event notification and command aggregation.
Intrinsically safe approvals including ATEX, FM, IECEx and CSA are offered under option code /V2S, with temperature class depending on the ambient range.
The table lists the main values stated in the datasheet for this model. Values depend on the selected capsule, wetted material and options, so always confirm the final model code with the datasheet before ordering.
| Parameter | Value |
|---|---|
| Type | Panel mount temperature transmitter, DIN rail |
| Inputs | Thermocouples, 2-, 3- and 4-wire RTDs, ohms and DC millivolts |
| Output | Two-wire 4 to 20 mA DC with HART 7 communication |
| Supply voltage | 8 to 35 V DC (8 to 30 V DC intrinsically safe); 13.8 to 35 V DC for digital communication |
| Load resistance | 0 to (E-8)/0.0236 ohm; 250 to 600 ohm for communication |
| Cold junction compensation accuracy | Plus or minus 1 C (thermocouples) |
| Sensor burnout | High or low per NAMUR NE43, or a value within 3.5 to 23 mA |
| Response time | 1 to 60 seconds, programmable |
| Isolation | Input and output isolated to 1500 V AC |
| Ambient temperature | -40 to 60 C |
| Ambient humidity | 0 to 95% RH, non-condensing |
| Mounting | DIN rail, DIN EN 60715, 35 mm |
| Wire size | 0.13 to 2.08 square mm (AWG 26 to 14), stranded |
| Enclosure | Polycarbonate |
| Weight | 150 g (0.33 lb) |
Typical applications in Oman and the GCC
- Oil and gas. Compressor and pump bearings, heater outlets and process lines on oil and gas sites use the YTA70P to turn a raw RTD or thermocouple into a stable 4 to 20 mA signal: panel and cabinet mounted conversion of thermocouple and RTD signals for DCS and PLC inputs, skid panels and remote I/O enclosures.
- Utilities and power. Power and utility plants fit the YTA70P on cooling water, lube-oil, steam and exhaust points, where the transmitter near the sensor reduces noise on long cable runs.
- Water and desalination. Desalination units and water treatment plants measure feed, brine and product temperature with RTDs, and the YTA70P gives the control system a clean signal from each point.
- Manufacturing and process. General manufacturing, petrochemical and food plants use the YTA70P on reactors, dryers, ovens and heat exchangers, with sensor burnout detection helping the maintenance team find broken sensors.
Selection and compatibility notes
Select the YTA70P by sensor type and measuring span. Pt100 RTDs are listed from -200 to 850 C, and the input table also covers many thermocouple types. Narrow spans improve resolution but never below the minimum span in the table, and the stated accuracy is the greater of a percentage of span and a fixed value in degrees.
Check the power supply and loop load. The datasheet gives the load resistance formula as a function of supply voltage, so a long cable or an indicator in the loop must be included in the calculation. Sensor burnout direction should be agreed with the control system so that a broken sensor produces a safe, recognizable signal.
For hazardous areas, review the intrinsically safe approval option codes listed in the datasheet and compare the entity parameters with the barrier or isolator that will be used.
Installation and commissioning of the YTA70P
Wire the YTA70P to the sensor terminals following the sensor type diagram, set the input type and span with the configuration tool, and then check the loop with a sensor simulator or a decade box. Keep the sensor leads away from power cables, and use shielded cable where the plant has strong electrical noise.
Record the sensor type, range and burnout direction in the commissioning record for the YTA70P, and keep the configuration file so that a replacement unit can be set up quickly.
Maintenance and calibration
Maintenance of the YTA70P is limited to periodic loop checks. Verify the output at several points with a calibrator, inspect terminals for corrosion, and check the sensor for drift or damage. If the transmitter fails, replace it and reload the saved configuration, which keeps downtime very short.
Good practice for temperature loops also includes storing the sensor calibration certificate with the loop record and checking the cable shield and gland sealing at each shutdown. Moisture ingress at the connection head is a common cause of drifting readings in hot and humid coastal sites, and a quick inspection prevents most such faults.
Related products and ordering notes for the YTA70P
Other Yokogawa models in the same product area include YTA70, YTA50, YTA610 and YTA710, which may suit neighboring points on the same plant. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Product names and model codes are used only to identify compatible equipment.
When you ask for a quotation, state the exact model code, the measuring range, the output type, any hazardous area approval and the quantity. A complete code lets us confirm that the unit matches the installed unit or the project specification, and it avoids delays caused by option mismatches.
Frequently asked questions in short
What is the Yokogawa this model? The Yokogawa this model is a panel (DIN rail) mount HART temperature transmitter. The this model is a DIN rail mount temperature transmitter that accepts thermocouple, RTD, ohm or millivolt inputs and converts them to a two-wire 4 to 20 mA signal with HART 7. What measuring ranges does the this model cover? Datasheet values for the YTA70P: Thermocouples, 2-, 3- and 4-wire RTDs, ohms and DC millivolts. What accuracy and output does the YTA70P provide? For the YTA70P the datasheet gives see the datasheet. Output and communication: Two-wire 4 to 20 mA DC with HART 7 communication.
Documents and quotation
The manufacturer datasheet for the YTA70P is attached to this page and gives the complete model and suffix codes, dimensions and options. To receive a quotation, send the RFQ with the part number YTA70P, the quantity and your required range and approvals, and the Seven Star LLC team will reply with availability and delivery information for Oman and the GCC.
Datasheets & Documents
- Datasheet Yokogawa YTA70P DIN Rail Mount HART Temperature Transmitter Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Yokogawa is the Japanese measurement and industrial automation company behind the DPharp EJA and EJX pressure transmitters, CENTUM distributed control systems and ProSafe-RS safety systems. Tamisuke Yokogawa set it up in 1915 as an electric meter research institute in Shibuya, Tokyo. It began selling electric meters in 1917, was incorporated as Yokogawa Electric Works in 1920, and has been Yokogawa Electric Corporation since 1986. In 1975 it released CENTUM, which it describes as the world's first distributed control system.
Seven Star LLC is an independent supplier in Muscat. We list Yokogawa transmitters, flowmeters, analysers, controllers, recorders and CENTUM and ProSafe spare modules, and supply them to oil and gas, power, water and process plants in Oman and the GCC by model code.
Yokogawa at a glance
| Established | 1915, Shibuya, Tokyo, by Tamisuke Yokogawa with Ichiro Yokogawa and Shin Aoki |
|---|---|
| Milestones | Electric meters from 1917; incorporated in 1920; CENTUM DCS in 1975; renamed Yokogawa Electric Corporation in 1986 |
| Headquarters | Tokyo, Japan |
| Product families | Pressure and temperature transmitters, magnetic, vortex and Coriolis flowmeters, liquid and gas analysers, controllers and recorders, CENTUM VP DCS, ProSafe-RS safety systems and STARDOM controllers |
Yokogawa products we list
| Family | Models | Typical use |
|---|---|---|
| Pressure and DP transmitters | EJA110E, EJA430E, EJA530E, EJX110A, EJX530A, EJX910A multivariable | Pressure, level and DP flow measurement in process plants |
| Temperature transmitters | YTA610, YTA710 | RTD and thermocouple signals converted to 4-20 mA, HART or fieldbus |
| Flowmeters | ADMAG AXG, ADMAG AXW, ROTAMASS TI, VY vortex, VF701 | Water and conductive liquids, mass flow of hydrocarbons, steam and gas |
| Analysers | TDLS8000 laser gas analyser, FLXA402, FLXA21 DO, E7042UD zirconia cell, K9471DS cover | Combustion O2, in-situ gas analysis, pH, conductivity and dissolved oxygen |
| Controllers and recorders | UT35A/UT32A, UT32A-D, UT55A/UT52A, UT75A, UP35A/UP32A, UP55A, YS1700, GX10/GX20, GP10/GP20, GM10, µR20000 | Single-loop control, furnace programs and data recording |
| Control and safety systems | CP451-10 processor, ADV161, ADV551, node interface unit, ProSafe-RS, ProSafe-RS Lite, ProSafe-SLS, FCN-500 | Spares and expansions for CENTUM DCS, safety systems and STARDOM |
| Battery packs | S9129FA, S9185FA, S9548FA | Memory backup batteries for DCS and controller modules |
The EJA and EJX transmitters use Yokogawa's DPharp sensor: two silicon resonators whose vibration frequency changes with pressure, so the output is a digital frequency rather than an analogue strain signal. The model code describes the instrument completely. In EJA110E, "110" is a differential pressure transmitter, and the letters after the dash set the span, wetted materials, process connection, electrical output and approvals. When you replace a transmitter, sending the full code from the nameplate avoids a mismatch in range or materials.
Where Yokogawa products are used
In Oman and the GCC, Yokogawa transmitters, analysers and control systems are found in oil and gas production, gas processing and LNG, refineries and petrochemical plants, power and desalination stations, and water treatment. Many plants still run CENTUM CS 3000 and CENTUM VP systems that need spare I/O modules and batteries.
Ordering Yokogawa products: what we need
Send the full model and suffix code from the nameplate (for example EJA110E-JMS5J-912NN/KF22) and the style code. For DCS modules, add the module type and system version. For analysers, send the sensor type, measuring range and process conditions.
Facts checked against Yokogawa's corporate history, October 2026.
Browse Yokogawa products by category: PLC & I/O Cards, Flowmeters, Pressure Instrumentation, Automation Accessories, Temperature Instrumentation.
FAQ
Questions about the Yokogawa YTA70P DIN Rail Mount HART Temperature
Answers from our engineering team on installation, compatibility and integration.
01What is the Yokogawa YTA70P?
The Yokogawa YTA70P is a panel (DIN rail) mount HART temperature transmitter. The YTA70P is a DIN rail mount temperature transmitter that accepts thermocouple, RTD, ohm or millivolt inputs and converts them to a two-wire 4 to 20 mA signal with HART 7.
02What measuring ranges does the YTA70P cover?
Datasheet values for the YTA70P: Thermocouples, 2-, 3- and 4-wire RTDs, ohms and DC millivolts.
03What accuracy and output does the YTA70P provide?
For the YTA70P the datasheet gives see the datasheet. Output and communication: Two-wire 4 to 20 mA DC with HART 7 communication.
04How is the YTA70P configured?
The YTA70P is configured for sensor type, range, damping and burnout direction. See the datasheet for the details of the input table and the supply and load limits.
05How can I request a quotation for the YTA70P in Oman?
Send an RFQ with the part number YTA70P, quantity, range, output and approvals through the inquiry form. Seven Star LLC replies with availability and delivery for Oman and the GCC, and the datasheet is on the product page.


















Reviews
There are no reviews yet.