Brand:

Honeywell UDC700 1/32 DIN Controller and Indicator

Description

Honeywell UDC700 1/32 DIN digital controller and indicator overview

The Honeywell UDC700 is the smallest controller in the UDC family, a 1/32 DIN unit with a 49 x 25 mm front. It measures a process variable on a universal input and controls it with PID or on/off action, and an indicator-only version is also offered. The manufacturer says it is built on the same technology as the UDC1000 and UDC1500 low-price controllers and is intended as a companion to them for simpler applications in tight spaces.

A large four-digit red LED display, 10 mm (0.4 inch) high, shows the essential information clearly from a distance. All input types, from thermocouples and RTDs to DC linear mA and mV signals, are configured in the field, and there is no hardware configuration needed. The specification sheet for this model dates from 2002, so check current configuration details when you request a quotation.

This page summarises the manufacturer documentation for the Honeywell UDC700 for buyers in Oman and the GCC. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Key features of the UDC700

The following features come from the manufacturer specification for the UDC700.

  • 1/32 DIN size, 49 x 25 mm, for very small panel openings.
  • Four-digit red LED display with 10 mm characters and indicator LEDs for output, mode and alarm status.
  • Universal input for thermocouples, RTDs and linear DC mA and mV signals, isolated at 2500 V from the outputs and supply except for the SSR driver.
  • Front face protection to NEMA 4 and IP66 against dust and water.
  • Hands-off automatic PID tuning with pretune as a standard function, or manual tuning, plus PID or on/off control with direct or reverse action.
  • Two local setpoints selectable from the keypad.
  • Standard outputs are either a 2 A relay control output plus an SSR driver for alarm 1, or an SSR driver control output plus a relay for alarm 1; a second alarm relay is optional.
  • Optional RS485 Modbus communication, which cannot be combined with alarm 2.

UDC700 technical specifications

The table lists the main data for the UDC700 from the manufacturer specification sheet.

Parameter Value
Model UDC700
Format 1/32 DIN, 49 x 25 mm front
Display Four-digit red LED, 10 mm (0.4 inch)
Accuracy 0.1 percent of span plus or minus 1 LSD (0.25 percent for types J and T)
Sampling rate Four samples per second
Input resolution About 14 bits
Digital filter Off, or 0.5 to 100.0 seconds
Input isolation 2500 V from outputs and supply, except SSR driver
Thermocouples B, J, K, N, R, S, T
RTD Pt100 (IEC), 3-wire
DC linear 4-20 mA, 0-20 mA, 10-50 mV, 0-50 mV
Relay output SPST, 2 A at 120 or 240 V resistive, over 500,000 operations
SSR driver More than 10 V dc into 500 ohms (50 mA maximum)
Alarm types PV high or low, deviation high or low
Communication RS485 Modbus, half duplex, 1200 to 9600 baud, 32 drops
Power supply 90 to 264 V ac; 24 V ac or 12 to 30 V dc option
Power consumption 4 W maximum
Weight 480 g maximum
Operating temperature 0 to 55 degC
Front panel rating NEMA 4 and IP66
Approvals UL and CE

Typical applications in Oman and the GCC

The UDC700 is used where a loop needs to be controlled from a very small panel opening. Typical uses in Oman and the GCC include the following.

  • Oil and gas: compact temperature control for instrument enclosures, heated sample lines and small test rigs.
  • Utilities and power: simple heater and thermostat replacement in cabinets, motors and lubricant skids.
  • Water and wastewater: laboratory benches, heated tanks and small analyser housings.
  • Manufacturing: packaging, sealing, plastics machinery and food equipment where several small controllers share a fascia.

Selection and compatibility notes for the UDC700

Choose the UDC700 when only a 1/32 DIN opening is available and the loop is straightforward: one input, one control output, one or two alarms. If you need a dual display, three outputs or setpoint ramping, the UDC1200 in 1/16 DIN is the next step.

Decide on the output arrangement, which is fixed by the model number: relay control with an SSR driver alarm, or SSR control with a relay alarm. The indicator-only version has no control output. The RS485 option replaces alarm 2, so choose between communication and a second alarm. The unit has no manual mode.

Installation and commissioning of the UDC700

Install the UDC700 following the manufacturer manual.

  • Cut the panel to the 1/32 DIN size and slide the unit in from the front, then secure it with the supplied clamp.
  • Wire the rear screw terminals, checking the model number for output and power supply type.
  • Keep sensor cables away from power wiring and use shielded cable for RS485.
  • Configure input, range and alarms from the front keys and run pretune.

Maintenance and service life

The UDC700 needs minimal maintenance. Keep the front face clean, check terminals for tightness and verify the input against a reference at your calibration interval. If a unit fails, compare the model number on the case with the replacement before wiring.

Related products and ordering notes

Related Honeywell controllers available on request include the UDC1200, UDC1700 and DC1010. Send the full model number with the output and power options so Seven Star LLC can quote the exact configuration.

UDC700 questions in brief

Common questions concern size, outputs and alarms. The UDC700 is a 49 x 25 mm controller with universal input, relay or SSR outputs and optional Modbus. The answers below summarise the key facts.

Documents and quotation

The manufacturer datasheet for the UDC700 is available from Seven Star LLC with this listing when it is attached, and it should be read together with the installation manual before any engineering decision. To request a quotation, send an RFQ that states the part number UDC700, the quantity, the delivery location and, where relevant, the options you need. Seven Star LLC replies with availability and lead time; no price is published on this page.

Other Models in the UDC Range

Seven Star LLC supplies models from the UDC range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Honeywell UDC2500 1/4 DIN Universal Digital ControllerControllers & Data AcquisitionView details
Honeywell UDC3200 1/4 DIN Controller with Math FunctionsControllers & Data AcquisitionView details
Honeywell UDC3500 1/4 DIN Dual-Loop Digital ControllerControllers & Data AcquisitionView details
Honeywell UDC1200 1/16 DIN Universal Digital ControllerControllers & Data AcquisitionView details
Honeywell UDC1700 1/8 DIN Universal Digital ControllerControllers & Data AcquisitionView details
Honeywell UDC700 1/32 DIN Controller and IndicatorControllers & Data AcquisitionYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Honeywell UDC700 1/32 DIN Controller and Indicator Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Honeywell is the American industrial technology group whose products on this site cover gas and flame detection, pressure transmitters, flow measurement, gas metering, fire alarm systems and helicopter rotor balancing equipment. Its roots go back to a thermostat business in Minneapolis in 1885 and to Mark Honeywell's heating company, which merged with it in 1927. Several brands we list have joined Honeywell over the years: Gent fire systems of Leicester (part of Honeywell since 2005), Chadwick-Helmuth (a Honeywell business unit from 2002) and Elster gas metering (acquired around the end of 2015).

Seven Star LLC is an independent supplier in Muscat. We list Honeywell gas detectors and sensors, transmitters, Elster gas meters and flow computers, Gent fire alarm equipment and Chadwick-Helmuth balancers, and supply them and their spares in Oman and the GCC by part number.

Honeywell company profile

Origins 1885, Minneapolis (Butz thermostat business); merged with Mark Honeywell's company in 1927
Brands in our range Honeywell Analytics gas detection, SmartLine transmitters, Elster gas metering, Gent fire detection, Chadwick-Helmuth rotor track and balance
Gent Founded in Leicester, UK, around 1872 by John Thomas Gent; part of Honeywell since 2005
Elster Gas, water and electricity metering; bought by Honeywell from Melrose, deal completed around the end of 2015

Milestones

  • 1885: The Butz thermostat business starts in Minneapolis.
  • 1927: It merges with Mark Honeywell's company.
  • 2005: Gent fire detection (Leicester, UK) becomes part of Honeywell.
  • 2015: Honeywell completes the purchase of Elster from Melrose around the end of the year.

Honeywell products we list

Family Models Typical use
Fixed gas detectors Searchline Excel, Searchline Excel Plus, 02104-N-XSSA, Sensepoint XCD RTD, Sensepoint XCD IR, XCD H2, Sensepoint XCL, Sensepoint XRL, OmniPoint, RAEGuard 2 PID Flammable, toxic and VOC gas detection in process areas
Sensors, flame detection and control SR-W-MP75C LEL sensor, SR-X2V O2 sensor, FS24X Plus flame detector, R4343E flame switch, System 57 card, 5704FS panel Replacement sensors, fire detection and gas detection control panels
Transmitters and flow SmartLine STG700, STG800, STR82D remote seal, VersaFlow Coriolis Process pressure and mass flow measurement
Elster gas metering Q.Sonic plus, TRZ2, Quantometer, RABO, IRM-3 DUO, EK280, EC 350, enCore FC1, enCore ZM1, gas-net F1, gas-net D2, GasLab Q2, USM display Gas meters, volume correction and fiscal flow computing
Gent fire alarm systems Vigilon Plus, Vigilon Compact Plus, Nano, Xenex, S-Quad detector, S-Cubed, ALD302 base, S4-34420 interfaces, loop card, repeat panel, mimic panel, XENS-850 call point, 74430 bell Addressable and conventional fire alarm systems in buildings and plants
Chadwick-Helmuth rotor track and balance 8500C, 8500C Plus, Vibrex 2000, Model 11, photocell system, printer, bracket, protractor Helicopter rotor track and balance and propeller balancing

Gas detection uses two basic approaches. Point detectors such as the Sensepoint XCD measure the gas at one location, with a catalytic or infrared sensor for flammable gas and an electrochemical cell for toxic gas such as H2S. Open path detectors such as the Searchline Excel send an infrared beam across an area up to a few hundred metres long and detect a gas cloud anywhere along it. Infrared sensors cannot be poisoned the way catalytic beads can, which matters on sites with silicones or H2S.

Where Honeywell products are used

In Oman and the GCC, Honeywell gas detectors protect wellheads, gas plants, refineries and tank farms. Elster meters and flow computers measure gas at city gate stations and in industry. Gent systems are installed in commercial buildings, hospitals and hotels, and Chadwick-Helmuth balancers are used by helicopter operators.

Ordering Honeywell products: what we need

Send the part number from the label (for example 02104-N-XSSA or SPXCDASMTXF). For gas detectors, add the gas, range, output and certification. For gas meters, add size (DN), flow range and pressure rating. For Gent equipment, add the panel type and loop protocol.

Facts checked against Honeywell press releases and SEC filings, and published histories of Gent and Chadwick-Helmuth, October 2026.

FAQ

Questions about the Honeywell UDC700 1/32 DIN Controller and Indicator

Answers from our engineering team on installation, compatibility and integration.

01What size is the UDC700?
It is a 1/32 DIN unit with a front of 49 x 25 mm and a four-digit red LED display with 10 mm characters.
02Which inputs does the UDC700 accept?
It accepts thermocouples B, J, K, N, R, S and T, Pt100 RTD and DC linear 4-20 mA, 0-20 mA, 10-50 mV and 0-50 mV signals.
03Does the UDC700 have communication?
Yes, an optional RS485 Modbus interface is available, but it cannot be combined with alarm 2 and cannot be field upgraded.
04Is there an indicator version of the UDC700?
Yes. An indicator-only version is offered, selected through the model number.
05How can I request a quotation for the UDC700?
Send an RFQ with the full model number, quantity and delivery location. Seven Star LLC will reply with availability and lead time; this page shows no price.