Banner TL50PS3AQ Pro Select Tower Light with Audible

Description

A three-segment 50 mm tower light with a built-in audible alarm and M12 connector

The TL50PS3AQ is a TL50 Pro Select tower light from Banner Engineering: a 50 mm, three-segment LED stack (green, yellow and red from bottom to top by default) with an omni-directional sealed audible alarm and an integral M12 quick-disconnect. The model key in the manual reads TL50, PS for Pro Select, 3 for three segments, A for the audible and Q for the connector.

All models are bimodal, so the same unit can be wired as a PNP or an NPN device. Banner’s Pro Editor software, with a Pro Converter Cable, is used to create custom configurations by choosing colours, flash patterns and animations; the manual states that a full preview connection is required for the Pro Select tower light.

Technical specifications

Parameter Specification
Model TL50PS3AQ: Pro Select, 3 segments, omni-directional sealed audible, integral M12 QD
Default segment colours Green, yellow, red (bottom to top)
Supply voltage 12 V DC to 30 V DC
Maximum current per LED segment 92 mA at 12 V DC; 50 mA at 24 V DC; 44 mA at 30 V DC
Audible alarm current 45 mA maximum
Audible alarm output 3.1 kHz plus or minus 500 Hz; 93 dB at 1 m (typical)
Input rating Leakage current immunity 400 uA; on/off response 250 ms maximum; PWM 0 to 100 %; PFM 100 Hz to 10 kHz
Wiring Bimodal PNP or NPN; 5-pin M12 on 3-segment models
Construction Bases, covers and light segment in polycarbonate
Environmental rating IP65; UL Type 4X
Operating temperature Non-audible -40 degrees C to +50 degrees C; audible -20 degrees C to +50 degrees C
Vibration / shock 10 Hz to 55 Hz, 1.0 mm peak-to-peak per IEC 60068-2-6 / 30 g, 11 ms per IEC 60068-2-27
Colour palette printed Red, green, yellow, blue, magenta, cyan, white, amber, rose, lime green, orange, sky blue, violet, spring green

Pro Select versus a plain tower light

Instead of fixed colours, each segment can show any of the 14 colours tabulated in the datasheet with chromaticity coordinates and typical lumen output, from 3.8 lm for blue to 24.4 lm for white at 5700 K. Flash patterns and animations come from the Pro Editor, so one stock model can serve as a stack light on one machine and a status or andon indicator on another.

In segment mode each segment is controlled by its own input wire; the datasheet’s wiring table lists the pin and colour assignments for the 5-pin models, with the black wire used as a reset input in advanced mode.

Variants and ordering notes

The same key gives TL50PS4 (four segments, blue, green, yellow, red by default), with or without the A audible, and with or without the Q connector. Without the Q suffix the unit has a 1.2 m (4 ft) integral PVC-jacketed cable. Models with a quick-disconnect need a mating cordset, and eight-pin models need an 8-pin to 5-pin cordset for programming.

A power supply such as the PSW-24-1, PSW-24-2 or PSD-24-4 is shown in the wiring example for programming. Please confirm segment count, audible need and connector before ordering.

Related Banner Engineering products: Banner QS30ARXH2OQ5 Water Sensor Receiver, High Gain, Banner SI-LS42 Locking Safety Interlock Switch, Banner EZ-SCREEN LS Type 4 Safety Light Curtain, Banner RSr-L-SIL-8A-Q Remote Safety Relay, Latched, Banner QS18VP6LLP Polarized Retroreflective Laser Sensor and Banner Q5XKLAF2000-Q8 Laser Triangulation Sensor with IO-Link.

Documents and quotation

Seven Star LLC is an independent supplier in Muscat and can quote this item on request. The reference document is Banner TL50 Pro Select Tower Light datasheet, p/n 219771 (manufacturer, unaltered), attached as a PDF; verify the segment count, audible option and connector against it, then send us the type code for a quotation. Browse Automation Accessories for alternatives.

Datasheets & Documents
  • PDF Datasheet Banner TL50 Pro Select Tower Light datasheet, p/n 219771 (manufacturer, unaltered) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Banner Engineering is the American maker of industrial sensors, indicator lights, wireless monitoring and machine safety products. Bob Fayfield founded it in 1966 as a small engineering firm in the Minneapolis area. The company is privately held and still based in Minnesota.

Seven Star LLC lists Banner devices including the Q4X rugged stainless steel laser distance sensor and the K50 Pro Beacon IO-Link multicolor RGB indicator, and supplies Banner sensors and indicators to plants and machine builders in Oman.

Banner Engineering company profile

Founded 1966, Minneapolis, Minnesota, USA
Founder Bob Fayfield
Headquarters Minneapolis area, Minnesota, USA
Ownership Privately held
Product families Photoelectric, laser, ultrasonic and radar sensors, Q4X and Q5X measurement sensors, QM30VT vibration and temperature sensors, K50 and TL50 indicator lights, safety light curtains and switches, Sure Cross wireless and IO-Link devices

Banner Q4X and K50 Pro

Banner offers the Q4X in four range versions, all starting at 25 mm: Q4X100 to 100 mm, Q4X300 to 300 mm, Q4X500 to 500 mm and Q4X600 to 600 mm. The series is available with discrete, analog and IO-Link outputs and has a display on the sensor. The K50 Pro Beacon is a status indicator whose color and behavior are set from the controller over IO-Link.

Banner Engineering products we list

Family Examples
Safety Switches & Guard Locking EZ-SCREEN LS Type 4 Safety Light Curtain, SI-LS42 Locking Safety Interlock Switch, SI-RF Non-Contact RF Safety Switch, SX5 Safety Laser Scanner
Laser Distance, LiDAR & Radar Sensors Q4X Rugged Stainless Steel Laser Distance, Q5XKLAF2000-Q8 Laser Triangulation Sensor, Q5ZKLAF1800-Q8 Laser Measurement Sensor with, Q90R2-12040-6KDQ 60 GHz Radar Sensor
PLC & I/O Cards ES-FA-9AA E-Stop Safety Module, SC10-2 Configurable Safety Controller, SC26-2 Configurable Safety Controller
Photoelectric Sensors Q20-2PLP-2M Polarized Retroreflective Sensor, Q3XTBLD-Q8 Laser Contrast Sensor, S18-2 Series 18 mm Barrel Photoelectric Sensor
Industrial Communications DXM700 Wireless IIoT Controller
Automation Accessories K50 Pro Beacon IO-Link Multicolor RGB
Ultrasonic Sensors Q45UBB63DAQ6 Ultrasonic Proximity Sensor
Vibration Monitoring QM30VT2-SS-QP Vibration and Temperature Sensor

Ordering Banner products: what we need

Send the complete Banner model number from the device label, because range, output type and connector are all coded into it. For the Q4X, state the measuring distance, the output your PLC input needs and the connector or cable style. For indicators, give the housing size, control method and voltage. Mating cordsets and brackets can be included for GCC orders.

Facts checked against Banner Engineering's published company profile, October 2026.

FAQ

Questions about the Banner TL50PS3AQ Pro Select Tower Light with Audible

Answers from our engineering team on installation, compatibility and integration.

01What does TL50PS3AQ stand for?
TL50 family, PS = Pro Select, 3 segments, A = omni-directional sealed audible, Q = integral M12 quick-disconnect.
02Can it be wired to NPN or PNP controllers?
Yes. The manual states that all models are bimodal and can be wired as PNP or NPN devices.
03How loud is the audible alarm?
Typically 93 dB at 1 m at 3.1 kHz plus or minus 500 Hz.
04What is the protection rating?
IP65 and UL Type 4X.
05What software configures the colours?
Banner Pro Editor with a Pro Converter Cable (MQDC-506-USB); a full preview connection is required.