Brand:

SICK WT34-R250 Photoelectric Proximity Sensor with Relay Output

Description

SICK WT34-R250 overview

Not every photoelectric switch needs a 24 V DC PLC behind it. The SICK WT34-R250 (part number 1019240) belongs to the W34 family and works straight from 20 to 250 V AC/DC, driving a change-over relay contact that can switch loads of several amperes. It is a photoelectric proximity sensor with a visible red LED and a range of 100 to 1,200 mm, so one box can detect an object and operate a contactor, lamp or alarm without any extra interface.

Typical demand in Oman comes from older motor control centres, door controls and basic conveyor panels where only mains voltage is available.

Relay output, delay times and sensing data

The relay is electrically isolated and offers change-over contacts. The datasheet gives 4 A at 250 V AC, 4 A at 24 V DC and 0.125 A at 250 V DC, together with UL ratings including general use and resistive loads, R300 and B300 for the normally open contacts. Inductive or capacitive loads need suitable spark suppression, and the usage categories are AC-15 and DC-13 according to EN 60947-1. Two selectors on the unit choose light or dark switching and add a switch-on or off delay between 0.5 s and 10 s.

  • Response time up to 10 ms, switching frequency 10 Hz
  • Time functions: switch-on delay and off delay, adjustable
  • Switching mode selectable via light/dark selector
  • MTTFD 487 years, B10D 59,123 switching cycles (electro-mechanical contacts)

WT34-R250 data table

Parameter Value
Part number 1019240
Principle Photoelectric proximity sensor
Sensing range 100 mm to 1,200 mm (90 percent remission, DIN 5033 white)
Light source / spot Visible red LED / 40 mm at 1,200 mm
Adjustment Potentiometer
Supply 20 V AC/DC to 250 V AC/DC, under 2 VA
Output Relay, electrically isolated, change-over
Switching current 4 A at 250 V AC, 4 A at 24 V DC, 0.125 A at 250 V DC
Delay time 0.5 s to 10 s via selector
Connection Terminals with M16 gland
Protection class II
Dimensions (W x H x D) 27 x 92 x 70 mm
Weight 140 g
Housing / enclosure rating ABS / IP67
Operating temperature Minus 40 to plus 60 C

How WT34-R250 differs from other WT34 variants

The W34 family covers both DC and mains versions. The WT34-B410 and WT34-V510 are 10 to 30 V DC sensors with an infrared LED, M12 connector and 2,500 mm range; the WT34-R250 and WT34-R220S07 are the relay types with terminals. Between the two relay types, the R250 uses visible red light with a 1,200 mm range, whereas the R220S07 uses infrared light, 2,500 mm range and a black mask between sender and receiver.

Feature WT34-R250 Compared variant
Sensing range 1,200 mm 2,500 mm (R220S07)
Light Visible red Infrared (R220S07)
Supply 20 to 250 V AC/DC 20 to 250 V AC/DC
Output Relay Relay
Special feature None Black mask (R220S07)

Applications

A relay sensor with delay is handy on automatic doors and barriers, in car-wash and tunnel controls, for lift-shaft or hoist presence checks, on simple stacking machines and wherever a legacy mains-voltage control panel without PLC must be extended by one detection point. The visible red spot simplifies alignment in field conditions, which helps small contractors in the Gulf finish installations rapidly.

Selection hints

Calculate the load first. A relay contact of 4 A is robust for lamps and small contactors, but heavy inductive loads need surge suppression, as the datasheet stresses. Use the time delay for run-on of fans or lights, and remember that the 10 Hz switching frequency makes this type unsuitable for fast counting. For fast PLC-based counting choose a DC version such as the WT34-B410 instead.

Installation

Open the cover, route the cable through the M16 gland, wire the supply and relay contacts as marked in the terminal layout, close the cover with the gasket seated and set the range by potentiometer. Protection class II means no earth connection is required for the sensor itself.

Check the sensitivity with the darkest real object, since the range data refer to 90 percent remission white. Dark or glossy objects will be detected at shorter distances, and a wall behind the detection point may need to be shielded to avoid background reflections. After commissioning, close the cover and tighten the gland to hold the IP67 rating.

Maintenance

Check the terminals once a year for tightness, wipe the lens, and replace the unit if relay contacts start to stick, since contact life is described by the B10D value. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Questions buyers ask about WT34-R250

What supply does the SICK WT34-R250 accept? A wide 20 V AC/DC to 250 V AC/DC range with power consumption under 2 VA, so it can sit directly on a mains-voltage control circuit.

What does the WT34-R250 relay output switch? An electrically isolated change-over relay rated 4 A at 250 V AC, 4 A at 24 V DC and 0.125 A at 250 V DC, with usage categories AC-15 and DC-13.

Can WT34-R250 delay its output? Yes, switch-on delay and off delay are available and adjustable from 0.5 s to 10 s with a time delay selector switch.

What is the sensing range of WT34-R250? 100 mm to 1,200 mm on an object with 90 percent remission, using visible red LED light with a 40 mm spot at 1,200 mm.

How is WT34-R250 connected? By a terminal block under the cover with an M16 gland; the housing is ABS, class II, IP67, 27 x 92 x 70 mm and weighs 140 g.

Documents and quotation

The manufacturer datasheet for WT34-R250 comes with this listing. Send an RFQ with the part number WT34-R250, the quantity and delivery point in Oman or the GCC, and we will reply with availability and lead time.

Other Models in the Sick Wt34 Range

Seven Star LLC supplies models from the Sick Wt34 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
SICK WT34-R220S07 Relay Photoelectric Sensor with Black MaskInductive Proximity SensorsView details
SICK WT34-V510 Photoelectric Proximity Sensor with Alarm OutputInductive Proximity SensorsView details
SICK WT34-R250 Photoelectric Proximity Sensor with Relay OutputInductive Proximity SensorsYou are viewing this model
Datasheets & Documents
  • PDF Datasheet SICK WT34-R250 Photoelectric Proximity Sensor with Relay Output Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

SICK is the German maker of industrial sensors: photoelectric and proximity sensors, safety laser scanners and light curtains, encoders, distance sensors, code readers and gas analysers. Erwin Sick, an optics engineer, founded it in Munich in 1946, and in 1952 it introduced its first marketable accident-prevention light curtain, which protected press operators by stopping the machine when a hand broke the light beam. The company moved to Waldkirch in the Black Forest in 1956 and is still headquartered there. It is a privately held company, and has been an Aktiengesellschaft (AG) since 1996.

SICK company profile

Founded 1946, Munich, Germany, by Erwin Sick (1909–1988)
Headquarters Waldkirch, Baden-Württemberg, Germany (since 1956)
Ownership Privately held; after the founder's death in 1988 his widow Gisela Sick became the main shareholder. Legal form SICK AG since 1996
Size More than 12,000 employees and group revenue of about EUR 2.3 billion (company figures for 2023)
First breakthrough Accident-prevention light curtain for presses, shown in Hanover in 1952
International growth First foreign subsidiary in France in 1972, United States in 1976; today sales and service companies worldwide
Product families Photoelectric, inductive, capacitive, magnetic and ultrasonic sensors; safety laser scanners, light curtains, safety controllers and relays; encoders and motor feedback systems; distance sensors and LiDAR; barcode and 2D code readers and machine vision; gas analysers, dust and flow measurement for process and emissions monitoring

Milestones

  • 1946: Erwin Sick receives a licence to run his engineering firm in Munich.
  • 1952: The first marketable accident-prevention light curtain is presented in Hanover and goes into series production.
  • 1956: The company moves to Waldkirch with 25 employees.
  • 1972 and 1976: Subsidiaries are founded in France and the United States.
  • 1996: SICK becomes an Aktiengesellschaft.
  • Today: Sensors for factory and logistics automation, machine safety and process analysis, with a large share of revenue outside Germany.

Choosing a SICK sensor

For object detection, the sensing principle comes first. A retro-reflective sensor (WL series) sends light to a reflector and switches when an object breaks the beam; it is reliable over long distances and easy to align. A sensor with background suppression (WTB series) detects an object at a set distance and ignores what is behind it, which suits conveyors with shiny or dark backgrounds. A through-beam pair (WS/WE) gives the longest range and the highest reliability in dust. For transparent bottles and film, use a model built for transparent objects (for example WL12G-3B or WL150-P420). The digits in the code also matter: "P" usually means a PNP output and "N" NPN, and the last digits set the connector or cable. For machine guarding, a safety laser scanner such as nanoScan3 or microScan3 protects an area, while a safety controller such as Flexi Soft combines several safety devices.

Where SICK products are used

In Oman and the GCC, SICK sensors are used in packaging and bottling lines, food and beverage plants, logistics and airport baggage handling, cement and steel plants, ports and cranes, automated warehouses, and on machines built by European OEMs. SICK safety scanners guard robots and automated guided vehicles, and its encoders give position feedback on motors, hoists and conveyors.

SICK products we list

Family Examples
Photoelectric sensors WL12-3P2431, WTB12-3P2431, GTB6-P4211, VL18-4P3240, WL12G-3B2531, WS/WE100, KT5W contrast, W26 IO-Link
Proximity, cylinder and ultrasonic sensors IME12-08NPSZC0S, IME18-05BPSZC0S, MZT8, UM18 4-20 mA, UM30, UFN3 fork
Machine safety nanoScan3, microScan3, S300 Professional, Flexi Soft FX3-CPU1, FX3-XTIO, ReLy OSSD
Encoders and motor feedback DFS60B, AFM60 PROFINET, AFS60 SSI, ATM60 PROFIBUS, SRS50, EFS50
Distance sensors and code readers DT50, DL50, DT35, Lector632

Ordering SICK products: what we need

Send the type code and the 7-digit SICK part number from the label (for example WTB12-3P2431 together with its part number). For a replacement sensor, add the output (PNP or NPN), connection (M8, M12 or cable) and sensing distance. For encoders, add the interface (incremental, SSI, PROFIBUS, PROFINET), resolution and shaft type. For safety scanners, tell us the model and whether the existing configuration needs to be kept.

Frequently requested SICK models: SICK RT-P3231 ZoneControl Background Suppression Sensor.

Facts checked against SICK's published company history and annual figures, October 2026.

FAQ

Questions about the SICK WT34-R250 Photoelectric Proximity Sensor with

Answers from our engineering team on installation, compatibility and integration.

01What supply does the SICK WT34-R250 accept?
A wide 20 V AC/DC to 250 V AC/DC range with power consumption under 2 VA, so it can sit directly on a mains-voltage control circuit.
02What does the WT34-R250 relay output switch?
An electrically isolated change-over relay rated 4 A at 250 V AC, 4 A at 24 V DC and 0.125 A at 250 V DC, with usage categories AC-15 and DC-13.
03Can WT34-R250 delay its output?
Yes, switch-on delay and off delay are available and adjustable from 0.5 s to 10 s with a time delay selector switch.
04What is the sensing range of WT34-R250?
100 mm to 1,200 mm on an object with 90 percent remission, using visible red LED light with a 40 mm spot at 1,200 mm.
05How is WT34-R250 connected?
By a terminal block under the cover with an M16 gland; the housing is ABS, class II, IP67, 27 x 92 x 70 mm and weighs 140 g.