Brand:

SICK WT34-R220S07 Relay Photoelectric Sensor with Black Mask

Description

SICK WT34-R220S07 explained

The SICK WT34-R220S07 (part number 1102367) combines the mains-voltage relay concept of the W34 family with the longer 2,500 mm infrared range and a special black mask between its sender and receiver windows. It runs on 20 to 250 V AC/DC, consumes under 2 VA and switches a change-over relay with 4 A at 250 V AC. The S07 suffix marks the special design, and the part is newer than most of its siblings, so it may not appear in older purchasing lists.

The black mask and long range

A black mask between the optics is a practical remedy for crosstalk inside the housing and for reflections from the front cover. The datasheet simply lists it as a special feature, so you should regard it as an optical design detail that stabilises detection of difficult objects rather than as a change in electrical performance. The infrared LED reaches 100 to 2,500 mm, and the spot at the far end is 80 mm wide.

  • Range 100 mm to 2,500 mm, infrared
  • Relay: change-over, electrically isolated
  • Delay: 0.5 s to 10 s switch-on or off delay
  • Switching mode: light or dark selector

WT34-R220S07 specification table

Parameter Value
Part number 1102367
Special feature Black mask between sender and receiver
Sensing range 100 mm to 2,500 mm, 90 percent remission
Light / spot Infrared / 80 mm at 2,500 mm
Supply 20 V AC/DC to 250 V AC/DC, under 2 VA
Output Relay, electrically isolated, change-over
Switching current 4 A at 250 V AC, 4 A at 24 V DC, 0.125 A at 250 V DC
Response time / frequency Up to 10 ms / 10 Hz
Delay 0.5 s to 10 s
Connection Terminals with M16 gland
Protection class II
Weight 140 g
Usage category AC-15, DC-13 (EN 60947-1)
Enclosure rating IP67

How WT34-R220S07 differs from other WT34 variants

It differs from the WT34-R250 mainly in the optics: 2,500 mm infrared range against 1,200 mm visible red, and a black mask between sender and receiver. The electrical side, relay ratings, terminals and delay times are the same. Against the DC types WT34-B410 and WT34-V510 it trades speed and the M12 plug for mains-voltage operation and a heavy-duty relay.

Typical applications

Gates, barriers and doors that must react to approaching vehicles; hoist and crane zones where mains-voltage control is standard; presence detection for pallets at long range, and sheet or box detection on old machinery. For lengthy ranges, a visible red spot is not available, so alignment is done using the LED indicators and a trial object.

Selection hints

Verify the load. For motors use a contactor, and fit spark suppression across inductive loads as the datasheet instructs. With 10 Hz switching frequency the sensor is suited to slow events only. If the target is dark, derate the range accordingly and confirm on site.

Mounting and wiring

Open the cover, pass the cable through the M16 gland, connect the supply and contacts, and select light or dark switching and the delay. Tighten the gland and close the cover to keep IP67.

When the sensor looks along an open space without a back wall, set sensitivity so that distant objects are ignored, using a test target at the maximum distance you want to cover. Where several sensors share one passage, offset them slightly or use different heights to avoid mutual interference. Write the final potentiometer position and selector settings on the wiring diagram.

Servicing

Inspect terminal tightness and lens cleanliness at regular intervals. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

For documentation, record that the WT34-R220S07 is a protection class II device in an ABS housing weighing 140 g, rated IP67 and for operation from minus 40 to plus 60 degrees Celsius. The relay usage categories AC-15 and DC-13 are quoted according to EN 60947-1, and the UL ratings listed in the datasheet include general use, resistive loads, R300 and B300 for the normally open contacts. Spark suppression across inductive or capacitive loads is recommended in the datasheet, and it also lengthens contact life, which is limited because the output is electro-mechanical. If the application needs hundreds of operations per minute, a solid-state DC sensor is the better choice than a relay type.

Before ordering, compare the supply voltage of your control panel with the 20 to 250 V AC/DC window, check that the relay rating covers the load, and state the full code WT34-R220S07 with part number 1102367. Because the black-mask variant is a special type, please mention the application so that we can confirm it is the intended version and not the plain WT34-R250 or another WT34 code. A short description of the target object and the required switching distance also helps to avoid a second site visit.

Questions buyers ask about WT34-R220S07

What is the S07 feature of SICK WT34-R220S07? The datasheet lists a black mask between sender and receiver as the special feature of this variant.

What range does WT34-R220S07 have? 100 mm to 2,500 mm with infrared light, a spot of 80 mm at 2,500 mm and potentiometer adjustment.

How is the output of WT34-R220S07 built? An electrically isolated relay with change-over contacts, 4 A at 250 V AC, 4 A at 24 V DC and 0.125 A at 250 V DC.

Can WT34-R220S07 delay switching? Yes, switch-on delay and off delay are available, adjustable from 0.5 s to 10 s.

What supply does WT34-R220S07 need? 20 V AC/DC to 250 V AC/DC with power consumption under 2 VA.

Documents and quotation

The manufacturer datasheet for WT34-R220S07 is attached. Send an RFQ with the part number WT34-R220S07, the quantity and your delivery point in Oman or the GCC for availability and lead time.

Other Models in the Sick Wt34 Range

Seven Star LLC supplies models from the Sick Wt34 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
SICK WT34-R220S07 Relay Photoelectric Sensor with Black MaskInductive Proximity SensorsYou are viewing this model
SICK WT34-V510 Photoelectric Proximity Sensor with Alarm OutputInductive Proximity SensorsView details
Datasheets & Documents
  • PDF Datasheet SICK WT34-R220S07 Relay Photoelectric Sensor with Black Mask Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

SICK is the German maker of industrial sensors: photoelectric and proximity sensors, safety laser scanners and light curtains, encoders, distance sensors, code readers and gas analysers. Erwin Sick, an optics engineer, founded it in Munich in 1946, and in 1952 it introduced its first marketable accident-prevention light curtain, which protected press operators by stopping the machine when a hand broke the light beam. The company moved to Waldkirch in the Black Forest in 1956 and is still headquartered there. It is a privately held company, and has been an Aktiengesellschaft (AG) since 1996.

SICK company profile

Founded 1946, Munich, Germany, by Erwin Sick (1909–1988)
Headquarters Waldkirch, Baden-Württemberg, Germany (since 1956)
Ownership Privately held; after the founder's death in 1988 his widow Gisela Sick became the main shareholder. Legal form SICK AG since 1996
Size More than 12,000 employees and group revenue of about EUR 2.3 billion (company figures for 2023)
First breakthrough Accident-prevention light curtain for presses, shown in Hanover in 1952
International growth First foreign subsidiary in France in 1972, United States in 1976; today sales and service companies worldwide
Product families Photoelectric, inductive, capacitive, magnetic and ultrasonic sensors; safety laser scanners, light curtains, safety controllers and relays; encoders and motor feedback systems; distance sensors and LiDAR; barcode and 2D code readers and machine vision; gas analysers, dust and flow measurement for process and emissions monitoring

Milestones

  • 1946: Erwin Sick receives a licence to run his engineering firm in Munich.
  • 1952: The first marketable accident-prevention light curtain is presented in Hanover and goes into series production.
  • 1956: The company moves to Waldkirch with 25 employees.
  • 1972 and 1976: Subsidiaries are founded in France and the United States.
  • 1996: SICK becomes an Aktiengesellschaft.
  • Today: Sensors for factory and logistics automation, machine safety and process analysis, with a large share of revenue outside Germany.

Choosing a SICK sensor

For object detection, the sensing principle comes first. A retro-reflective sensor (WL series) sends light to a reflector and switches when an object breaks the beam; it is reliable over long distances and easy to align. A sensor with background suppression (WTB series) detects an object at a set distance and ignores what is behind it, which suits conveyors with shiny or dark backgrounds. A through-beam pair (WS/WE) gives the longest range and the highest reliability in dust. For transparent bottles and film, use a model built for transparent objects (for example WL12G-3B or WL150-P420). The digits in the code also matter: "P" usually means a PNP output and "N" NPN, and the last digits set the connector or cable. For machine guarding, a safety laser scanner such as nanoScan3 or microScan3 protects an area, while a safety controller such as Flexi Soft combines several safety devices.

Where SICK products are used

In Oman and the GCC, SICK sensors are used in packaging and bottling lines, food and beverage plants, logistics and airport baggage handling, cement and steel plants, ports and cranes, automated warehouses, and on machines built by European OEMs. SICK safety scanners guard robots and automated guided vehicles, and its encoders give position feedback on motors, hoists and conveyors.

SICK products we list

Family Examples
Photoelectric sensors WL12-3P2431, WTB12-3P2431, GTB6-P4211, VL18-4P3240, WL12G-3B2531, WS/WE100, KT5W contrast, W26 IO-Link
Proximity, cylinder and ultrasonic sensors IME12-08NPSZC0S, IME18-05BPSZC0S, MZT8, UM18 4-20 mA, UM30, UFN3 fork
Machine safety nanoScan3, microScan3, S300 Professional, Flexi Soft FX3-CPU1, FX3-XTIO, ReLy OSSD
Encoders and motor feedback DFS60B, AFM60 PROFINET, AFS60 SSI, ATM60 PROFIBUS, SRS50, EFS50
Distance sensors and code readers DT50, DL50, DT35, Lector632

Ordering SICK products: what we need

Send the type code and the 7-digit SICK part number from the label (for example WTB12-3P2431 together with its part number). For a replacement sensor, add the output (PNP or NPN), connection (M8, M12 or cable) and sensing distance. For encoders, add the interface (incremental, SSI, PROFIBUS, PROFINET), resolution and shaft type. For safety scanners, tell us the model and whether the existing configuration needs to be kept.

Frequently requested SICK models: SICK RT-P3231 ZoneControl Background Suppression Sensor.

Facts checked against SICK's published company history and annual figures, October 2026.

FAQ

Questions about the SICK WT34-R220S07 Relay Photoelectric Sensor with

Answers from our engineering team on installation, compatibility and integration.

01What is the S07 feature of SICK WT34-R220S07?
The datasheet lists a black mask between sender and receiver as the special feature of this variant.
02What range does WT34-R220S07 have?
100 mm to 2,500 mm with infrared light, a spot of 80 mm at 2,500 mm and potentiometer adjustment.
03How is the output of WT34-R220S07 built?
An electrically isolated relay with change-over contacts, 4 A at 250 V AC, 4 A at 24 V DC and 0.125 A at 250 V DC.
04Can WT34-R220S07 delay switching?
Yes, switch-on delay and off delay are available, adjustable from 0.5 s to 10 s.
05What supply does WT34-R220S07 need?
20 V AC/DC to 250 V AC/DC with power consumption under 2 VA.