- Automation & ControlView all 2,795 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: SICK
SICK WL18-3P130S06 Cable Version Retro-Reflective Sensor
Description
SICK WL18-3P130S06 in context
Fixed cables avoid connector problems, and that is the idea behind the SICK WL18-3P130S06 (part number 1041931). It is a W18-3 retro-reflective sensor, flagged in the datasheet as a special device, with a 2 m PVC cable of four wires, a PNP output and heightened vibration resistance. The body remains 17.6 x 75.5 x 33.5 mm, but the weight rises to 120 g with the cable attached.
Why a cable version
On machines that shake, plug-in connectors are a classic failure source because the coupling nut vibrates loose. A moulded cable removes that interface and lets the installer run the cable straight to a terminal box. The S06 version also advertises heightened vibration resistance, so the housing and electronics have been prepared for such duty. IP67 protection and an ABS body suit damp, dusty halls found in port and cement industries around the Gulf.
- Cable: 4-wire PVC, 2 m
- Weight 120 g
- Heightened vibration resistance
- Output PNP, complementary, up to 100 mA
WL18-3P130S06 specification
| Parameter | Value |
|---|---|
| Part number | 1041931 |
| Version | Special device |
| Sensing range | 0 to 5 m (max. 0 to 7 m) |
| Spot / focus | 40 mm at 2 m / 1.8 degrees |
| Supply | 10 to 30 V DC, 40 mA |
| Switching output | PNP, complementary, light or dark switching |
| Response time / frequency | Under 500 microseconds / 1,000 Hz |
| Connection | Cable, 4-wire, 2 m, PVC |
| Weight | 120 g |
| Housing / optics | ABS / PMMA |
| Enclosure rating | IP67 |
| Temperature | Minus 40 to plus 60 C |
| MTTFD | 1,759 years |
How WL18-3P130S06 differs from other WL18-3 variants
Relative to the WL18-3P430 the P130S06 replaces the M12 plug by a fixed 2 m cable and adds vibration resistance, with weight rising from 40 g to 120 g. Relative to the WL18-3P630S04 it has no test input and no cubic connector but keeps IP67 instead of IP65. It is therefore the sensible choice where the cable should be hard-wired and the environment is wet.
Use cases
Press shops, vibrating screens, rail-wagon loading and tipping stations, and portable machines often use cable versions. In a typical installation the cable runs through a protective conduit to a junction box, from which the PNP signal enters the PLC.
Selection
Verify the cable length requirement; 2 m is fixed. If a longer run is needed, extend through a terminal box and not by splicing in the field. Check that the PLC input matches PNP and that the reflector fits the intended range.
Installation
Fix the housing firmly, secure the cable with clips every 30 cm to reduce movement, align the reflector, and tune the sensitivity using the potentiometer. Observe the switching LED while the machine runs.
Care
Inspect the cable sheath for cuts and abrasion. Replace the complete sensor if the cable is damaged. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Compared with plug-in types, a cable sensor requires a little more care in procurement because the cable length is fixed by the type code: 2 m for this version. If a different length is needed, request a different variant rather than modifying the cable, since cutting and re-joining it may reduce the ingress protection from IP67. For high vibration, route the cable so that it forms a gentle loop near the sensor; this absorbs movement and stops the sheath from flexing at the entry point, which is the typical first point of failure on moving machine parts.
When you place an order, quote the full type code WL18-3P130S06 together with the part number 1041931 and mention the reflector and mounting bracket you plan to use. Because the unit is catalogued as a special device, lead times can differ from those of the standard M12 type, and a short note about the target application helps us confirm that this exact variant is the one your engineer has specified. Keep the datasheet with the machine documentation so that later maintenance teams can verify the cable length, weight and vibration rating of the installed sensor.
Electrical protection on this cable type matches the rest of the W18-3 family: reverse-polarity protection of the supply, interference suppression and an output that tolerates overload and short circuits. Even so, run the sensor from a clean 10 to 30 V DC supply and keep its cable away from motor and inverter leads, because a four-wire cable of 2 m has no shield and picks up noise in the same way as any unscreened signal line. If the machine has a frequency converter nearby, cross power and signal cables at right angles and keep a distance of at least 10 cm wherever possible, which costs nothing and prevents most random false switching complaints. Finally, remember that the typical 5 m range is reached only with the PL80A reflector; a smaller reflector or a dirty one shortens the reach noticeably.
Questions buyers ask about WL18-3P130S06
What is SICK WL18-3P130S06? A special-device version of the W18-3 retro-reflective sensor with a 2 m 4-wire PVC cable, PNP output and heightened vibration resistance.
How heavy is WL18-3P130S06? It weighs 120 g, heavier than the 40 g M12 plug version because of the integrated cable.
What range does WL18-3P130S06 have? 0 to 5 m typical, 0 to 7 m maximum with PL80A, with a 40 mm spot at 2 m.
What protection does WL18-3P130S06 offer? IP67 with an ABS housing and PMMA optics; ambient operation from minus 40 to plus 60 degrees Celsius.
What output type is WL18-3P130S06? PNP, complementary, light or dark switching, up to 100 mA with response time under 500 microseconds.
Documents and quotation
The manufacturer datasheet for WL18-3P130S06 comes with this page. Send an RFQ with the part number WL18-3P130S06, the quantity and your delivery location in Oman or the GCC for availability and lead time.
Other Models in the Sick Wl18 3 Range
Seven Star LLC supplies models from the Sick Wl18 3 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| SICK WL18-3N430 NPN Retro-Reflective Photoelectric Sensor | Inductive Proximity Sensors | View details |
| SICK WL18-3P130S06 Cable Version Retro-Reflective Sensor | Inductive Proximity Sensors | You are viewing this model |
| SICK WL18-3P630S04 Vibration-Resistant Retro-Reflective Sensor | Inductive Proximity Sensors | View details |
| SICK WL18-3P430 W18-3 Retro-Reflective Photoelectric Sensor | Inductive Proximity Sensors | View details |
Datasheets & Documents
- Datasheet SICK WL18-3P130S06 Cable Version Retro-Reflective Sensor Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
SICK is the German maker of industrial sensors: photoelectric and proximity sensors, safety laser scanners and light curtains, encoders, distance sensors, code readers and gas analysers. Erwin Sick, an optics engineer, founded it in Munich in 1946, and in 1952 it introduced its first marketable accident-prevention light curtain, which protected press operators by stopping the machine when a hand broke the light beam. The company moved to Waldkirch in the Black Forest in 1956 and is still headquartered there. It is a privately held company, and has been an Aktiengesellschaft (AG) since 1996.
SICK company profile
| Founded | 1946, Munich, Germany, by Erwin Sick (1909–1988) |
|---|---|
| Headquarters | Waldkirch, Baden-Württemberg, Germany (since 1956) |
| Ownership | Privately held; after the founder's death in 1988 his widow Gisela Sick became the main shareholder. Legal form SICK AG since 1996 |
| Size | More than 12,000 employees and group revenue of about EUR 2.3 billion (company figures for 2023) |
| First breakthrough | Accident-prevention light curtain for presses, shown in Hanover in 1952 |
| International growth | First foreign subsidiary in France in 1972, United States in 1976; today sales and service companies worldwide |
| Product families | Photoelectric, inductive, capacitive, magnetic and ultrasonic sensors; safety laser scanners, light curtains, safety controllers and relays; encoders and motor feedback systems; distance sensors and LiDAR; barcode and 2D code readers and machine vision; gas analysers, dust and flow measurement for process and emissions monitoring |
Milestones
- 1946: Erwin Sick receives a licence to run his engineering firm in Munich.
- 1952: The first marketable accident-prevention light curtain is presented in Hanover and goes into series production.
- 1956: The company moves to Waldkirch with 25 employees.
- 1972 and 1976: Subsidiaries are founded in France and the United States.
- 1996: SICK becomes an Aktiengesellschaft.
- Today: Sensors for factory and logistics automation, machine safety and process analysis, with a large share of revenue outside Germany.
Choosing a SICK sensor
For object detection, the sensing principle comes first. A retro-reflective sensor (WL series) sends light to a reflector and switches when an object breaks the beam; it is reliable over long distances and easy to align. A sensor with background suppression (WTB series) detects an object at a set distance and ignores what is behind it, which suits conveyors with shiny or dark backgrounds. A through-beam pair (WS/WE) gives the longest range and the highest reliability in dust. For transparent bottles and film, use a model built for transparent objects (for example WL12G-3B or WL150-P420). The digits in the code also matter: "P" usually means a PNP output and "N" NPN, and the last digits set the connector or cable. For machine guarding, a safety laser scanner such as nanoScan3 or microScan3 protects an area, while a safety controller such as Flexi Soft combines several safety devices.
Where SICK products are used
In Oman and the GCC, SICK sensors are used in packaging and bottling lines, food and beverage plants, logistics and airport baggage handling, cement and steel plants, ports and cranes, automated warehouses, and on machines built by European OEMs. SICK safety scanners guard robots and automated guided vehicles, and its encoders give position feedback on motors, hoists and conveyors.
SICK products we list
| Family | Examples |
|---|---|
| Photoelectric sensors | WL12-3P2431, WTB12-3P2431, GTB6-P4211, VL18-4P3240, WL12G-3B2531, WS/WE100, KT5W contrast, W26 IO-Link |
| Proximity, cylinder and ultrasonic sensors | IME12-08NPSZC0S, IME18-05BPSZC0S, MZT8, UM18 4-20 mA, UM30, UFN3 fork |
| Machine safety | nanoScan3, microScan3, S300 Professional, Flexi Soft FX3-CPU1, FX3-XTIO, ReLy OSSD |
| Encoders and motor feedback | DFS60B, AFM60 PROFINET, AFS60 SSI, ATM60 PROFIBUS, SRS50, EFS50 |
| Distance sensors and code readers | DT50, DL50, DT35, Lector632 |
Ordering SICK products: what we need
Send the type code and the 7-digit SICK part number from the label (for example WTB12-3P2431 together with its part number). For a replacement sensor, add the output (PNP or NPN), connection (M8, M12 or cable) and sensing distance. For encoders, add the interface (incremental, SSI, PROFIBUS, PROFINET), resolution and shaft type. For safety scanners, tell us the model and whether the existing configuration needs to be kept.
Frequently requested SICK models: SICK RT-P3231 ZoneControl Background Suppression Sensor.
Facts checked against SICK's published company history and annual figures, October 2026.
Browse SICK products by category: Sensors & Transmitters.
FAQ
Questions about the SICK WL18-3P130S06 Cable Version Retro-Reflective
Answers from our engineering team on installation, compatibility and integration.
01What is SICK WL18-3P130S06?
A special-device version of the W18-3 retro-reflective sensor with a 2 m 4-wire PVC cable, PNP output and heightened vibration resistance.
02How heavy is WL18-3P130S06?
It weighs 120 g, heavier than the 40 g M12 plug version because of the integrated cable.
03What range does WL18-3P130S06 have?
0 to 5 m typical, 0 to 7 m maximum with PL80A, with a 40 mm spot at 2 m.
04What protection does WL18-3P130S06 offer?
IP67 with an ABS housing and PMMA optics; ambient operation from minus 40 to plus 60 degrees Celsius.
05What output type is WL18-3P130S06?
PNP, complementary, light or dark switching, up to 100 mA with response time under 500 microseconds.


















Reviews
There are no reviews yet.