- Automation & ControlView all 2,795 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: SICK
SICK WL18-3P430 W18-3 Retro-Reflective Photoelectric Sensor
Description
SICK WL18-3P430, the W18-3 workhorse
Many plants in Oman know the W18-3 as the classic rectangular photo eye with a rotary sensitivity dial on top, and the SICK WL18-3P430 (part number 1025911) is its PNP retro-reflective version with an M12 plug. It measures 17.6 mm by 75.5 mm by 33.5 mm, weighs just 40 g and carries a visible red LED with narrow focus of 1.8 degrees. Because it is one of the long-running catalogue types, many existing machines in refineries, bottling halls and cement plants still use it, which is why replacement demand continues.
Optical and electrical profile of WL18-3P430
The LED emits visible red light at around 645 nm. At 2 m the spot measures 40 mm across. A polarisation filter lets the sensor work reliably with a PL80A reflector even if the target is glossy. The housing is ABS with a PMMA front lens. Electrically the device wants 10 to 30 V DC, draws about 40 mA, switches up to 100 mA and answers within 500 microseconds; the switching frequency reaches 1,000 Hz.
- Max. range 7 m, typical 5 m with PL80A
- Focus 1.8 degrees, spot 40 mm at 2 m
- PNP, complementary, light or dark switching
- Circuit protection: reverse polarity, interference suppression, overcurrent and short-circuit protection
WL18-3P430 data sheet summary
| Parameter | Value |
|---|---|
| Part number | 1025911 |
| Dimensions (W x H x D) | 17.6 x 75.5 x 33.5 mm |
| Principle | Retro-reflective, autocollimation, polarising |
| Sensing range | 0 to 5 m (max. 0 to 7 m) |
| Adjustment | Potentiometer |
| Supply voltage | 10 V DC to 30 V DC |
| Current consumption | 40 mA |
| Output | PNP, complementary, light or dark switching, up to 100 mA |
| Response time | Under 500 microseconds |
| Switching frequency | 1,000 Hz |
| Connection | Male connector M12, 4-pin |
| Weight | 40 g |
| Housing / optics | ABS / PMMA |
| Enclosure rating | IP67 |
| Operating temperature | Minus 40 to plus 60 C |
| MTTFD | 1,759 years |
How WL18-3P430 differs from other WL18-3 variants
The W18-3 range spreads over several output and connection styles on the same body. The WL18-3P430 uses a PNP output with a straight M12 connector at 40 g. The WL18-3N430 switches NPN. The WL18-3P130S06 is a special device with a 2 m cable and heightened vibration resistance at 120 g. The WL18-3P630S04 has a cubic 6-pin connector, a test input and also vibration resistance, with IP65 and 70 g. Pick the P430 when you want the standard M12 cabling and IP67.
Where it is used
In GCC process industries the photo eye works as a gate-open detector on bagging machines, a level helper on screw conveyors, a pallet presence sensor on filling lines and a door-position sensor for roller shutters. The red spot is easy to see even outdoors in daylight when shaded, and the narrow 1.8 degree focus allows detection of objects at the far end of a 5 m span. For dusty cement or sand handling, mount the reflector on a bracket that is easy to wipe.
Selection advice
Make sure your PLC input is the sinking type for PNP signals. Choose a reflector with a suitable size for the range, as the datasheet figures assume PL80A. Plan for a mating M12 cable with four wires; the datasheet gives the wiring for output Q and its complement, which can serve both light- and dark-switching logic. If vibration is high, such as on press lines, consider the S06 or S04 variants instead.
Setting up WL18-3P430
Mount the sensor with the supplied clamp or screws, align the red spot onto the reflector, turn the sensitivity dial until the output switches reliably, then check with a sample object. Keep the beam free of steam where possible; the optics are autocollimating so there is no minimum distance to a reflector near the lens.
Maintenance
Clean the PMMA lens and reflector with a damp cloth. Check the M12 plug and replace the sensor if the housing shows cracks. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Plan the electrical side with the known limits in mind: supply of 10 to 30 V DC with ripple under 5 Vpp, a short-circuit protected network of at most 8 A and circuit protection for reverse polarity, interference suppression and output overload. The WL18-3P430 carries UL file numbers NRKH.E181493 and NRKH7.E181493 for North American installations, which can matter for equipment exported from Oman to projects that follow UL practice. With a mean time to dangerous failure of 1,759 years it is also easy to place in a safety-related parts calculation as a non-safety sensor, since its diagnostic coverage is stated as 0 percent.
Questions buyers ask about WL18-3P430
What is the typical range of the SICK WL18-3P430? 0 to 5 m typical and 0 to 7 m maximum with the PL80A reflector, using a visible red LED and a 40 mm light spot at 2 m.
What output does WL18-3P430 provide? A PNP output with complementary function, light or dark switching, up to 100 mA, response time under 500 microseconds and 1,000 Hz switching frequency.
How heavy and how protected is WL18-3P430? It weighs 40 g, has an ABS housing with PMMA optics and is rated IP67 on its 4-pin M12 male connector.
What is the safety data of WL18-3P430? The datasheet lists MTTFD of 1,759 years and DCavg of 0 percent.
How does WL18-3P430 differ from the NPN type? The WL18-3N430 has the same body and optics but an NPN output stage and 40 mA current consumption with the same 17.6 x 75.5 x 33.5 mm body.
Documents and quotation
The manufacturer datasheet for WL18-3P430 comes with this page. Send an RFQ with the part number WL18-3P430, the quantity and your delivery point in Oman or the GCC, and we will confirm availability and lead time.
Other Models in the Sick Wl18 3 Range
Seven Star LLC supplies models from the Sick Wl18 3 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| SICK WL18-3N430 NPN Retro-Reflective Photoelectric Sensor | Inductive Proximity Sensors | View details |
| SICK WL18-3P130S06 Cable Version Retro-Reflective Sensor | Inductive Proximity Sensors | View details |
| SICK WL18-3P630S04 Vibration-Resistant Retro-Reflective Sensor | Inductive Proximity Sensors | View details |
| SICK WL18-3P430 W18-3 Retro-Reflective Photoelectric Sensor | Inductive Proximity Sensors | You are viewing this model |
Datasheets & Documents
- Datasheet SICK WL18-3P430 W18-3 Retro-Reflective Photoelectric Sensor Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
SICK is the German maker of industrial sensors: photoelectric and proximity sensors, safety laser scanners and light curtains, encoders, distance sensors, code readers and gas analysers. Erwin Sick, an optics engineer, founded it in Munich in 1946, and in 1952 it introduced its first marketable accident-prevention light curtain, which protected press operators by stopping the machine when a hand broke the light beam. The company moved to Waldkirch in the Black Forest in 1956 and is still headquartered there. It is a privately held company, and has been an Aktiengesellschaft (AG) since 1996.
SICK company profile
| Founded | 1946, Munich, Germany, by Erwin Sick (1909–1988) |
|---|---|
| Headquarters | Waldkirch, Baden-Württemberg, Germany (since 1956) |
| Ownership | Privately held; after the founder's death in 1988 his widow Gisela Sick became the main shareholder. Legal form SICK AG since 1996 |
| Size | More than 12,000 employees and group revenue of about EUR 2.3 billion (company figures for 2023) |
| First breakthrough | Accident-prevention light curtain for presses, shown in Hanover in 1952 |
| International growth | First foreign subsidiary in France in 1972, United States in 1976; today sales and service companies worldwide |
| Product families | Photoelectric, inductive, capacitive, magnetic and ultrasonic sensors; safety laser scanners, light curtains, safety controllers and relays; encoders and motor feedback systems; distance sensors and LiDAR; barcode and 2D code readers and machine vision; gas analysers, dust and flow measurement for process and emissions monitoring |
Milestones
- 1946: Erwin Sick receives a licence to run his engineering firm in Munich.
- 1952: The first marketable accident-prevention light curtain is presented in Hanover and goes into series production.
- 1956: The company moves to Waldkirch with 25 employees.
- 1972 and 1976: Subsidiaries are founded in France and the United States.
- 1996: SICK becomes an Aktiengesellschaft.
- Today: Sensors for factory and logistics automation, machine safety and process analysis, with a large share of revenue outside Germany.
Choosing a SICK sensor
For object detection, the sensing principle comes first. A retro-reflective sensor (WL series) sends light to a reflector and switches when an object breaks the beam; it is reliable over long distances and easy to align. A sensor with background suppression (WTB series) detects an object at a set distance and ignores what is behind it, which suits conveyors with shiny or dark backgrounds. A through-beam pair (WS/WE) gives the longest range and the highest reliability in dust. For transparent bottles and film, use a model built for transparent objects (for example WL12G-3B or WL150-P420). The digits in the code also matter: "P" usually means a PNP output and "N" NPN, and the last digits set the connector or cable. For machine guarding, a safety laser scanner such as nanoScan3 or microScan3 protects an area, while a safety controller such as Flexi Soft combines several safety devices.
Where SICK products are used
In Oman and the GCC, SICK sensors are used in packaging and bottling lines, food and beverage plants, logistics and airport baggage handling, cement and steel plants, ports and cranes, automated warehouses, and on machines built by European OEMs. SICK safety scanners guard robots and automated guided vehicles, and its encoders give position feedback on motors, hoists and conveyors.
SICK products we list
| Family | Examples |
|---|---|
| Photoelectric sensors | WL12-3P2431, WTB12-3P2431, GTB6-P4211, VL18-4P3240, WL12G-3B2531, WS/WE100, KT5W contrast, W26 IO-Link |
| Proximity, cylinder and ultrasonic sensors | IME12-08NPSZC0S, IME18-05BPSZC0S, MZT8, UM18 4-20 mA, UM30, UFN3 fork |
| Machine safety | nanoScan3, microScan3, S300 Professional, Flexi Soft FX3-CPU1, FX3-XTIO, ReLy OSSD |
| Encoders and motor feedback | DFS60B, AFM60 PROFINET, AFS60 SSI, ATM60 PROFIBUS, SRS50, EFS50 |
| Distance sensors and code readers | DT50, DL50, DT35, Lector632 |
Ordering SICK products: what we need
Send the type code and the 7-digit SICK part number from the label (for example WTB12-3P2431 together with its part number). For a replacement sensor, add the output (PNP or NPN), connection (M8, M12 or cable) and sensing distance. For encoders, add the interface (incremental, SSI, PROFIBUS, PROFINET), resolution and shaft type. For safety scanners, tell us the model and whether the existing configuration needs to be kept.
Frequently requested SICK models: SICK RT-P3231 ZoneControl Background Suppression Sensor.
Facts checked against SICK's published company history and annual figures, October 2026.
Browse SICK products by category: Sensors & Transmitters.
FAQ
Questions about the SICK WL18-3P430 W18-3 Retro-Reflective
Answers from our engineering team on installation, compatibility and integration.
01What is the typical range of the SICK WL18-3P430?
0 to 5 m typical and 0 to 7 m maximum with the PL80A reflector, using a visible red LED and a 40 mm light spot at 2 m.
02What output does WL18-3P430 provide?
A PNP output with complementary function, light or dark switching, up to 100 mA, response time under 500 microseconds and 1,000 Hz switching frequency.
03How heavy and how protected is WL18-3P430?
It weighs 40 g, has an ABS housing with PMMA optics and is rated IP67 on its 4-pin M12 male connector.
04What is the safety data of WL18-3P430?
The datasheet lists MTTFD of 1,759 years and DCavg of 0 percent.
05How does WL18-3P430 differ from the NPN type?
The WL18-3N430 has the same body and optics but an NPN output stage and 40 mA current consumption with the same 17.6 x 75.5 x 33.5 mm body.


















Reviews
There are no reviews yet.