Brand:

SICK DT50-2B215552 Time-of-Flight Distance Sensor, 30 m

Description

SICK DT50-2B215552 in brief

The SICK DT50-2B215552 (part number 1075271) is the larger, tougher sibling of the Dx35 range. It belongs to the Dx50-2 family of time-of-flight sensors, measures natural objects from 200 mm up to 30,000 mm and carries a zinc die-cast housing of 36.2 x 63 x 58.6 mm with a window of PMMA. A three-LED indicator and a liquid-crystal display on top allow settings and measured values to be read on site, so the sensor doubles as a local gauge.

Performance data

Range depends on remission: 30,000 mm at 90 percent, 17,000 mm at 18 percent and 10,000 mm at 6 percent, all from 200 mm. The accuracy is plus or minus 7 mm and resolution 100 micrometres. Response time can be selected from 1.67 ms to 150 ms in five steps, equivalent to 500 Hz down to 5.5 Hz switching frequency. The red laser with 658 nm and class 1 designation produces a spot of 10 x 10 mm at 10 m, which is small enough to hit narrow targets at long distances.

  • Warm-up time up to 15 minutes, initialisation up to 300 ms
  • Ambient light immunity 40,000 lx
  • Shock resistance up to 70 g for 6 ms in 100,000 shocks
  • MTTFD 101 years

Interfaces and special functions

IO-Link V1.1 at COM3 (230.4 kBaud) transfers process data, parameters, diagnostics and data storage. The analog output has 16-bit resolution as a current of 4 to 20 mA or a voltage of 0 to 10 V, and digital outputs are complementary push-pull Q and not-Q up to 100 mA. Additional functions in the datasheet include shape comparison based on the distance measured over time, hold measurement value, switch-off or locking of the display, easy teach and a multifunctional input for laser off or external teach.

DT50-2B215552 specification table

Parameter Value
Part number 1075271
Principle Time of flight, red laser 658 nm, class 1
Measuring range 200 to 30,000 mm (90 percent), 17,000 mm (18 percent), 10,000 mm (6 percent)
Accuracy / resolution Plus or minus 7 mm / 100 micrometres
Response time 1.67 to 150 ms
Light spot 10 x 10 mm at 10 m
Supply 10 V DC to 30 V DC, up to 1.7 W
Analog output 4 to 20 mA or 0 to 10 V, 16 bit
Interface IO-Link V1.1, COM3 230.4 kBaud
Display 3 LEDs plus LC display
Connection M12 male connector, 5-pin
Housing / weight Zinc die-cast / 235 g
Enclosure rating IP65, IP67
Ambient temperature Minus 40 to plus 65 C; up to 140 C with cooling plates

How DT50-2B215552 differs from other time-of-flight variants

Against the DT35-B15551 it reaches 30 m instead of 12 m on a bright natural target, is more accurate at plus or minus 7 mm against plus or minus 10 mm, offers 16-bit instead of 12-bit analog resolution and has a display, but it is larger at 235 g in metal instead of 65 g in plastic. Against the reflector-based DL35-B15552 it needs no tape but reaches 30 m rather than 35 m.

Applications in the region

Container and crane positioning in ports, level and stockpile distance in cement and mining, steel-yard vehicle detection and heavy gantry positioning are classic uses. The wide temperature option up to plus 140 degrees Celsius with cooling plates or the heat protection filter opens hot-zone measurement near furnaces and kilns.

Selection and mounting

Decide between natural and reflector targets, then check the minimum remission. Mount on a rigid bracket; at 30 m an angular error of a fraction of a degree moves the spot noticeably. Use the display for aiming, and set the response time to match process speed.

Service

Clean the window, check cooling plates in hot areas and keep documentation of the teach values. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Hot-zone use deserves careful planning. The datasheet quotes operation to minus 30 up to plus 140 degrees Celsius with two cooling plates, article number 2055755, or optionally with a heat protection filter, article number 2085598, and notes water cooling as a further footnote. Mount the sensor so that cooling plates have contact with a heat sink or air flow, and check the temperature at the housing, not only the process temperature. The EMC standards listed are EN 61000-6-2 and EN 61000-6-4, humidity up to 95 percent without condensation, and vibration is tested by noise testing from 20 to 500 Hz at 10 g RMS for 2 hours per axis. When requesting a quote, quote DT50-2B215552 and part number 1075271, plus accessories and delivery location in Oman or the GCC.

Questions buyers ask about DT50-2B215552

What range does SICK DT50-2B215552 reach? 200 mm to 30,000 mm at 90 percent remission, 17,000 mm at 18 percent and 10,000 mm at 6 percent, on natural objects without a reflector.

How accurate is DT50-2B215552? The datasheet gives plus or minus 7 mm accuracy, 100 micrometre resolution and repeatability from 0.5 mm.

What display and housing does DT50-2B215552 have? Three LEDs and an LC display in a zinc die-cast housing of 36.2 x 63 x 58.6 mm, weighing 235 g, rated IP65 and IP67.

Which interface does DT50-2B215552 use? IO-Link V1.1 at COM3 230.4 kBaud, with 16-bit analog output, complementary digital outputs and a multifunctional input.

What temperatures can DT50-2B215552 withstand? Minus 40 to plus 65 degrees Celsius normally, and minus 30 to plus 140 degrees Celsius with two cooling plates or an optional heat protection filter.

Documents and quotation

The manufacturer datasheet for DT50-2B215552 is attached to this listing. Send an RFQ with the part number DT50-2B215552, quantity and delivery location in Oman or the GCC for availability and lead time.

Typical Questions From Maintenance Teams

Maintenance engineers replacing a SICK DT50-2B215552 usually ask whether the new unit is a direct fit, whether settings can be copied from the old one, and whether any accessories must be ordered separately. The answer depends on the exact order code and the generation of the installed inductive proximity sensors, so the nameplate details are the best starting point. Send them with your request and we will check the match, point out any differences in connections or options, and list the parts needed so that the job can be finished in one visit.

Datasheets & Documents
  • PDF Datasheet SICK DT50-2B215552 Time-of-Flight Distance Sensor, 30 m Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

SICK is the German maker of industrial sensors: photoelectric and proximity sensors, safety laser scanners and light curtains, encoders, distance sensors, code readers and gas analysers. Erwin Sick, an optics engineer, founded it in Munich in 1946, and in 1952 it introduced its first marketable accident-prevention light curtain, which protected press operators by stopping the machine when a hand broke the light beam. The company moved to Waldkirch in the Black Forest in 1956 and is still headquartered there. It is a privately held company, and has been an Aktiengesellschaft (AG) since 1996.

SICK company profile

Founded 1946, Munich, Germany, by Erwin Sick (1909–1988)
Headquarters Waldkirch, Baden-Württemberg, Germany (since 1956)
Ownership Privately held; after the founder's death in 1988 his widow Gisela Sick became the main shareholder. Legal form SICK AG since 1996
Size More than 12,000 employees and group revenue of about EUR 2.3 billion (company figures for 2023)
First breakthrough Accident-prevention light curtain for presses, shown in Hanover in 1952
International growth First foreign subsidiary in France in 1972, United States in 1976; today sales and service companies worldwide
Product families Photoelectric, inductive, capacitive, magnetic and ultrasonic sensors; safety laser scanners, light curtains, safety controllers and relays; encoders and motor feedback systems; distance sensors and LiDAR; barcode and 2D code readers and machine vision; gas analysers, dust and flow measurement for process and emissions monitoring

Milestones

  • 1946: Erwin Sick receives a licence to run his engineering firm in Munich.
  • 1952: The first marketable accident-prevention light curtain is presented in Hanover and goes into series production.
  • 1956: The company moves to Waldkirch with 25 employees.
  • 1972 and 1976: Subsidiaries are founded in France and the United States.
  • 1996: SICK becomes an Aktiengesellschaft.
  • Today: Sensors for factory and logistics automation, machine safety and process analysis, with a large share of revenue outside Germany.

Choosing a SICK sensor

For object detection, the sensing principle comes first. A retro-reflective sensor (WL series) sends light to a reflector and switches when an object breaks the beam; it is reliable over long distances and easy to align. A sensor with background suppression (WTB series) detects an object at a set distance and ignores what is behind it, which suits conveyors with shiny or dark backgrounds. A through-beam pair (WS/WE) gives the longest range and the highest reliability in dust. For transparent bottles and film, use a model built for transparent objects (for example WL12G-3B or WL150-P420). The digits in the code also matter: "P" usually means a PNP output and "N" NPN, and the last digits set the connector or cable. For machine guarding, a safety laser scanner such as nanoScan3 or microScan3 protects an area, while a safety controller such as Flexi Soft combines several safety devices.

Where SICK products are used

In Oman and the GCC, SICK sensors are used in packaging and bottling lines, food and beverage plants, logistics and airport baggage handling, cement and steel plants, ports and cranes, automated warehouses, and on machines built by European OEMs. SICK safety scanners guard robots and automated guided vehicles, and its encoders give position feedback on motors, hoists and conveyors.

SICK products we list

Family Examples
Photoelectric sensors WL12-3P2431, WTB12-3P2431, GTB6-P4211, VL18-4P3240, WL12G-3B2531, WS/WE100, KT5W contrast, W26 IO-Link
Proximity, cylinder and ultrasonic sensors IME12-08NPSZC0S, IME18-05BPSZC0S, MZT8, UM18 4-20 mA, UM30, UFN3 fork
Machine safety nanoScan3, microScan3, S300 Professional, Flexi Soft FX3-CPU1, FX3-XTIO, ReLy OSSD
Encoders and motor feedback DFS60B, AFM60 PROFINET, AFS60 SSI, ATM60 PROFIBUS, SRS50, EFS50
Distance sensors and code readers DT50, DL50, DT35, Lector632

Ordering SICK products: what we need

Send the type code and the 7-digit SICK part number from the label (for example WTB12-3P2431 together with its part number). For a replacement sensor, add the output (PNP or NPN), connection (M8, M12 or cable) and sensing distance. For encoders, add the interface (incremental, SSI, PROFIBUS, PROFINET), resolution and shaft type. For safety scanners, tell us the model and whether the existing configuration needs to be kept.

Frequently requested SICK models: SICK RT-P3231 ZoneControl Background Suppression Sensor.

Facts checked against SICK's published company history and annual figures, October 2026.

FAQ

Questions about the SICK DT50-2B215552 Time-of-Flight Distance Sensor,

Answers from our engineering team on installation, compatibility and integration.

01What range does SICK DT50-2B215552 reach?
200 mm to 30,000 mm at 90 percent remission, 17,000 mm at 18 percent and 10,000 mm at 6 percent, on natural objects without a reflector.
02How accurate is DT50-2B215552?
The datasheet gives plus or minus 7 mm accuracy, 100 micrometre resolution and repeatability from 0.5 mm.
03What display and housing does DT50-2B215552 have?
Three LEDs and an LC display in a zinc die-cast housing of 36.2 x 63 x 58.6 mm, weighing 235 g, rated IP65 and IP67.
04Which interface does DT50-2B215552 use?
IO-Link V1.1 at COM3 230.4 kBaud, with 16-bit analog output, complementary digital outputs and a multifunctional input.
05What temperatures can DT50-2B215552 withstand?
Minus 40 to plus 65 degrees Celsius normally, and minus 30 to plus 140 degrees Celsius with two cooling plates or an optional heat protection filter.