Honeywell Chadwick-Helmuth Mounting Bracket (8500C/Vibrex)

Name: Honeywell Chadwick-Helmuth Mounting Bracket
Brand: Honeywell

Description

Overview

The Honeywell Chadwick-Helmuth mounting bracket is a structural accessory used with the 8500C and Vibrex analyzer kits to mount sensors, pick-ups and auxiliary equipment on the aircraft or in the workshop. The bracket is manufactured to the Chadwick-Helmuth design and is supplied as a verified spare for maintenance organisations that operate the analyzer family. It provides a rigid and repeatable mounting point, which is required for consistent vibration measurements on helicopter and fixed wing aircraft.

The bracket is used at the helicopter pick-up points defined by the Chadwick-Helmuth procedure and at the engine and propeller locations of fixed wing aircraft. The sensor is attached with the standard studs and clamps, and the bracket position defines the measuring axis for the analyzer. The same part is used in the workshop test fixture, where the analyzer is verified against the reference vibration source under identical mounting conditions for every calibration run. The spare is inspected before shipment.

Engineering and Design

A vibration measurement is only as repeatable as its mounting point, so the bracket is designed to hold the sensor firmly in place with a defined orientation relative to the measured axis. The bracket is used with the standard Chadwick-Helmuth sensor mounting hardware, including the studs and clamps that attach the pick-up to the airframe structure. Because the same bracket geometry is used across the analyzer family, a single spare supports the 8500C, 8500C Plus and Vibrex 2000 kits.

The bracket is inspected against the original Chadwick-Helmuth drawing before shipment, including the hole pattern, the mounting faces and the surface treatment. Maintenance crews keep the spare brackets in the analyzer kit so a damaged part can be replaced on site without delaying the balance run. The part is also used in workshop fixtures where the analyzer is checked against a reference vibration source.

The bracket is installed with the standard Chadwick-Helmuth mounting hardware and is positioned so the sensor axis is aligned with the measured direction. On helicopter airframes the bracket is attached to the prescribed pick-up point defined by the analyzer procedure, and on fixed wing aircraft it is used at the engine and propeller locations. The rigid connection prevents the resonance of the mounting structure from influencing the vibration reading, which is essential when the analyzer must resolve the rotor speed component from the total signal. In the workshop the bracket is used in the test fixture where the analyzer is checked against the reference vibration source, giving the same mounting conditions for every calibration run. The spare bracket is inspected against the original drawing before shipment, and the mounting faces and the hole pattern are verified with the gauge. Operators that perform on-site balance jobs carry the spare in the analyzer kit, so a damaged bracket is replaced without delaying the run. The part is compatible with the sensor mounting studs and clamps of the Chadwick-Helmuth family, which keeps the accessory set interchangeable across the 8500C and Vibrex instruments. The bracket completes the accessory set of the Chadwick-Helmuth analyzer family.

Key Features

Rigid mounting bracket for analyzer sensors
Fits 8500C, 8500C Plus and Vibrex 2000 kits
Defined sensor orientation for repeatable readings
Inspected against Chadwick-Helmuth drawing
Supplied as verified spare
Compatible with standard sensor mounting hardware

Applications

The bracket is used wherever Chadwick-Helmuth vibration sensors must be mounted: helicopter airframe pick-up points, fixed wing engine and propeller locations, and workshop test fixtures. It is a common spare for MRO organisations operating the 8500C and Vibrex analyzer family.

Specifications

Product line

Chadwick-Helmuth accessoriesnType: mounting bracketnCompatibility: 8500C, 8500C Plus, Vibrex 2000 kitsnMaterial: metal, surface treatednInspection: against original drawingnUse: sensor and pick-up mounting

Why Seven Star LLC

Seven Star LLC supplies Chadwick-Helmuth analyzer accessories, including mounting brackets, to aviation maintenance organisations across Oman and the GCC. Every part number is checked against the original description before your order is confirmed, and our team helps you match the bracket to your analyzer kit. Because mounting brackets are typically specific to both the analyzer model, whether that is the 8500C or the Vibrex, and the airframe it is being fitted to, we confirm both details before shipment, since a bracket that fits the analyzer housing correctly but was designed for a different aircraft mounting point will not secure properly during a track and balance procedure.

For MRO facilities managing accessory inventory across multiple analyzer kits and helicopter types, we help plan bracket spares around your actual fleet composition rather than a generic inventory list, since a facility supporting several airframes may need distinct bracket variants for what looks like the same analyzer accessory category. If you are unsure which specific bracket variant your kit requires, send us the analyzer serial number and aircraft type, and we will confirm the correct part before you place an order, so the bracket arrives ready to install rather than requiring a return and reorder once it’s found not to fit during a scheduled hangar visit that has no time to spare for the wrong part showing up on the workbench at exactly the wrong moment during a busy maintenance day.

Request a Quote for Honeywell Chadwick-Helmuth Mounting Bracket (8500C/Vibrex)

Submit a formal inquiry through our RFQ page with the bracket part number and your analyzer model. We will confirm the correct accessory and respond with a formal quotation. | Inquiry Form

Related Products

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Honeywell Chadwick-Helmuth Mounting Bracket (8500C/Vibrex)”

About brand

Chadwick-Helmuth, a Honeywell brand, is a trusted name in vibration monitoring and balancing technology for aerospace and industrial applications. For over 70 years, the company has developed high-precision instruments that ensure mechanical stability, efficiency, and safety in rotating machinery. Its product range includes vibration analyzers, balance computers, and diagnostic sensors used in aviation maintenance, energy, and manufacturing industries. The Chadwick-Helmuth 135M series delivers reliable data for predictive maintenance and system optimization. Seven Star LLC supplies authentic Chadwick-Helmuth analyzers and monitoring solutions across the Middle East, offering accurate, dependable diagnostics supported by Honeywell’s global engineering expertise.

Honeywell is a global technology corporation specializing in advanced industrial automation, process control architectures, and precision field instrumentation. At Seven Star LLC, we provide Honeywell’s robust engineering solutions, including distributed control systems (DCS), smart pressure and temperature transmitters, and modular safety systems. Engineered to optimize complex production loops and ensure rigorous cyber-physical security, these technologies are critical for refineries, power generation plants, and petrochemical facilities across Oman. By supplying authentic Honeywell hardware and control platforms, Seven Star LLC enables GCC enterprises to achieve exceptional operational stability, regulatory compliance, and maximized asset throughput in demanding industrial environments.