Brand:

AUMA FQM/FQMEx Fail-Safe Unit for Part-Turn Actuators

Description

Overview

The AUMA FQM fail-safe unit gives electric part-turn actuators a purely mechanical emergency function. In case of a trip, the unit drives the valve to a defined safe position, OPEN or CLOSED, using energy stored in a constant force spring, so no electrical power is needed during the fail-safe movement. AUMA offers the unit for torques of 150 Nm to 1,200 Nm in open-close duty, and the explosion-proof FQMEx version is available alongside the standard FQM. The unit is combined with SQ, SQR, SQEx and SQREx part-turn actuators, and it automates butterfly valves as well as ball and plug valves at a swing angle of 90 degrees.

In Oman and the GCC, Seven Star LLC proudly supplies the AUMA FQM and FQMEx to power, water, oil and gas and process customers in the Sultanate of Oman and across the GCC. For plants in Sohar, Salalah and the Muscat region where an emergency shutdown valve must act even if the grid, the control system or a power distribution board fails, a spring-powered actuator is often the preferred safety layer, and Seven Star LLC helps engineers select the right size and certification level for each valve.

Fail-Safe Operating Principle

The core of the AUMA FQM is a constant force spring motor. Conventional return springs deliver their highest torque at the start of travel and the lowest at the end, which is exactly when a valve needs the most torque to seat reliably, so they must be oversized. The AUMA constant force spring drum delivers a virtually constant torque across the whole stroke. A planetary gearing acts as an overriding gear: during normal operation it passes the actuator torque directly to the valve and the spring is disengaged and stays fully wound, and during fail-safe operation it passes the stored spring energy to the valve while the actuator is inactive.

Initiation is by a defined criterion: an ESD signal (24 V DC), mains failure, or either of the two, selected when the order is placed and not changeable later. In standard operation a solenoid with a toggle lever holds the spring wound. When the criterion is met the solenoid releases the spring, and the integrated electric motor acts as a brake so that the speed of the AUMA FQM fail-safe operation can be adjusted, giving an operating time between 8 s and 54 s. Reduced speed on the final approach to the end position avoids pressure peaks in the pipeline and protects the valve.

Engineering Design of the AUMA FQM

The AUMA FQM fits seamlessly into AUMA’s modular design. It is combined with SQ part-turn actuators (FQM 05.1 with SQ 05.2, 07.1 with SQ 07.2, 10.1 with SQ 10.2 and 12.1 with SQ 12.2, and the Ex equivalents with SQEx) and uses the same interfaces, so it can be retrofitted to an existing plant when safety requirements increase. The swing angle is adjustable between 80 and 96 degrees according to the AUMA FQM and FQMEx technical data, and the valve interface complies with EN ISO 5211 using a splined coupling, which is available unbored, with square bore, two-flat bore or keyway bore. End position switches are set automatically during the setting procedure for OPEN and CLOSED and need no separate adjustment.

Service conditions match the actuators it accompanies: IP68 enclosure protection, KS corrosion protection, ambient temperature from −30 °C to +70 °C for the standard FQM and from −30 °C to +60 °C for the explosion-proof FQMEx (an option gives −40 °C to +60 °C on both versions) and corrosion category C5. Electrical connection is via AUMA plug/socket connector and cable entries are available in different versions. The FQMEx data sheet lists ATEX marking II 2G Ex db eb IIB T4 Gb and IECEx Ex db eb IIB T4 Gb. AUMA’s FQM/FQMEx product page additionally lists an FM approval (Class I Div 1 Groups C, D T4 and Class I Zone 1 Group IIB T4) that does not appear on the data sheet, so the FM certificate should be confirmed for the exact configuration at order stage. AUMA also offers an optional fire-protection version of the unit for emergencies involving fire.

Key Features

The AUMA FQM combines mechanical reliability with the integration benefits of the AUMA range. Its main features are listed below.

  • Fail-safe operation with stored mechanical energy, requiring no electrical power during the emergency stroke.
  • Constant torque characteristics across the full travel, so the unit can be sized smaller than with conventional springs.
  • Spring is not operated during standard operation, which prevents premature spring fatigue and protects the valve.
  • Safe OPENING/CLOSING up to SIL 2 (HFT=0) or SIL 3 (HFT=1) under IEC 61508, and safe end position feedback up to SIL 2.
  • Safe end position feedback up to PL c under EN ISO 13849.
  • Adjustable fail-safe operating speed from 8 s to 54 s, with reduced speed on the approach to the end position.
  • Explosion-proof FQMEx version and an optional fire-protection version for emergencies involving fire.
  • End position switches set automatically with the end position procedure, with no separate adjustment required.

Industrial Applications

The AUMA FQM is used wherever a valve must reach a safe position without electrical power. Examples named by AUMA include overfill protection and drainage protection in tank farms, gas regulating and metering stations, water reservoirs where burst pipes must not cause leakage, cooling systems where oven overheating must be prevented, steam generating boilers in power plants and fire protection in road and railway tunnels. These duties are found throughout the Gulf region in desalination plants, power stations, gas facilities and large water infrastructure, where emergency shutdown on power loss is a regulatory or design requirement.

In Oman and the GCC, Seven Star LLC distributes the AUMA FQM and the FQMEx with the supporting technical data and SIL documentation across the Sultanate of Oman and the GCC. We help engineers decide whether the criterion for fail-safe initiation should be an ESD signal, mains failure or both, because this is fixed at order, and we coordinate the combination with the right SQ, SQR, SQEx or SQREx actuator and AC integral controls so the full assembly arrives matched and documented. When reviewing the AUMA FQM against the rest of the AUMA range, engineers often also look at the AUMA SQ part-turn actuator, the AUMA SQEx explosion-proof part-turn actuator and the AUMA SQREx. Because the AUMA FQM stores its energy mechanically, a plant can specify the AUMA FQM where a battery or capacitor backup is undesirable, since the unit drives the valve to its safe position without electrical power.

Technical Specifications

The following table summarises the key data published by AUMA for the AUMA FQM and FQMEx range, using the separate FQM and FQMEx data sheets linked on this page (ATEX and IECEx values) and AUMA’s FQM/FQMEx product page (FM listing, which is not shown on the data sheet); where the two versions differ, as with the ambient temperature, both values are shown. SIL data refer to the SIL version of the unit.

Parameter Specification
Model FQM 05.1 – FQM 12.1 / FQMEx 05.1 – FQMEx 12.1
Function Mechanical fail-safe unit for open-close duty
Torque range 150 Nm – 1,200 Nm (150, 300, 600, 1,200 Nm by size)
Operating time for 90° (fail-safe) 8 s – 54 s
Swing angle 80° – 96° (FQM and FQMEx technical data)
Suitable actuators SQ, SQR, SQEx, SQREx (05.2 – 12.2)
Initiation criterion 24 V DC ESD signal, mains failure, or ESD signal or mains failure
Enclosure protection IP68
Corrosion protection KS
Ambient temperature FQM: −30 °C to +70 °C (option −40 °C to +60 °C); FQMEx: −30 °C to +60 °C (option −40 °C to +60 °C)
ATEX explosion protection II 2G Ex db eb IIB T4 Gb
FM explosion protection (AUMA product page; not on the data sheet) Class I, Div. 1, Groups C, D T4; Class I, Zone 1, Group IIB T4
IECEx Ex db eb IIB T4 Gb
Functional safety SIL version only: IEC 61508 SIL 2 (HFT=0) or SIL 3 (HFT=1); end position feedback SIL 2; EN ISO 13849 PL c
Valve attachment EN ISO 5211 (F07 – F14 depending on size)

Request a Quote for AUMA FQM

To request a quotation for the AUMA FQM or FQMEx, send us the valve data, required fail-safe direction, initiation criterion, hazardous-area classification and SIL requirement. Seven Star LLC will return a formal RFQ response with stock and delivery information and the technical data sheet linked on this page. In Oman and the GCC, we supply safety equipment on request, and our instrumentation division can assist with documentation for safety assessments.

Datasheets & Documents
  • PDF Datasheet AUMA FQM 05.1 - FQM 12.1 Technical Data (Fail-Safe Unit) Download
  • PDF Datasheet AUMA FQMEx 05.1 - FQMEx 12.1 Technical Data Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

AUMA builds electric actuators for industrial valves, gates and dampers. The company was founded in 1964 near Stuttgart by Werner Riester and Rudolf Dinse, moved its headquarters to Müllheim in south-west Germany in the early 1970s, and still trades as the owner-managed AUMA Riester GmbH & Co. KG. Its actuators run isolation and control valves in water, power, oil and gas and process plants worldwide.

Seven Star LLC is an independent supplier listing AUMA multi-turn and part-turn actuators, actuator controls, gearboxes and spare parts for buyers in Oman and the GCC. We work from the nameplate data so that a replacement matches the installed actuator, controls and gearbox.

AUMA company profile

Origin Founded in 1964 by Werner Riester (engineering) and Rudolf Dinse (sales and finance); registered as Riester KG in Esslingen. Water and wastewater plants were the first customers.
Headquarters Müllheim, Baden-Württemberg, Germany (since the early 1970s). Production in Germany, with further plants in India, the USA and China, and around 30 sales and service companies worldwide.
Ownership Privately held, owner-managed company: AUMA Riester GmbH & Co. KG
Torque and thrust range Multi-turn, part-turn and linear actuators from 1.5 Nm to 675,000 Nm with gearboxes, and linear thrust up to 217 kN, as published by AUMA
Design principle Modular: actuator, integral controls and gearbox are combined to suit the valve, so one actuator size can serve open-close, modulating, fieldbus or explosion-proof duty

Milestones

  • 1964: Werner Riester and Rudolf Dinse found AUMA near Stuttgart; the first actuator range follows, with water and sewage plants as the first customers.
  • Early 1970s: Lack of space in Nellingen leads to the move to Müllheim in south-west Germany.
  • 1974: AUMA Benelux, the first foreign subsidiary, is founded.
  • Today: About 2,800 employees worldwide, around 850 of them in Müllheim, according to AUMA.

AUMA actuator, controls and gearbox series

Series Type Typical use
SA 07.2 to SA 16.2, SA 25.1 to SA 40.1 Multi-turn actuators, open-close duty Gate and globe valves, sluice gates and penstocks; SA 07.2 to 16.2 cover roughly 10 to 1,000 Nm, the .1 sizes go far higher
SAR 07.2 to SAR 30.1 Multi-turn actuators, modulating duty Control valves that receive a continuous position setpoint and many starts per hour
SAV, SARV, SQV, SQRV Variable-speed actuators Slow approach to the seat to limit water hammer, fast travel elsewhere
SQ 05.2 to SQ 14.2, SQR Part-turn actuators Ball, butterfly and plug valves and dampers, about 50 to 2,400 Nm; SQR for modulating duty; FQM fail-safe unit for spring-return action
SAEx, SAREx, SQEx, PROFOX-MX, TIGRON Explosion-proof actuators Hazardous areas in oil, gas and chemical plants, with ATEX and IECEx certified versions
AUMA MATIC AM, AUMATIC AC, ACExC 01.2, AMExC 01.1, AC 01.2-SIL Integral actuator controls AM for simple parallel wiring; AC for positioning, diagnostics and fieldbus (PROFIBUS DP, PROFINET, Modbus, FOUNDATION Fieldbus, HART depending on version); SIL version for safety functions
GS, GHE, SA + GS combination Part-turn worm gearboxes Large butterfly and ball valves, from GS 63.3 up to GS 630.3 at 675,000 Nm
GK, GST, GHT, GP Multi-turn gearboxes (bevel, spur, worm, planetary) Offset or right-angle drives and very high multi-turn torque
LE, SVC/SVCR, PROFOX-L Linear actuators and thrust units Globe and control valves with a rising stem, up to 217 kN
PROFOX-M, PROFOX-Q Compact smart actuators Small valves where a full SA or SQ is oversized
SA-UW, SGM/SGMR, SVM/SVMR, SAN/SARN Special versions Submerged valves, seawater-exposed ship and offshore duty, nuclear plant service
SIMA2 Master station Fieldbus network management for many actuators on one plant

Where AUMA actuators are used

Water transmission and treatment is the largest use: pipeline isolation valves, pumping stations, desalination plants and sluice gates. AUMA actuators also run valves in power plant steam, feedwater and cooling systems, pipelines and tank farms, refineries and chemical plants, and on ships and offshore platforms. In the Gulf, check the ambient temperature rating, since actuators in direct sun can exceed 50 °C, and specify the enclosure protection for sand and humidity.

Ordering AUMA actuators and spare parts: what we need

For a replacement, send photos of the actuator, motor and controls nameplates: type designation, commission or order number, serial number and wiring diagram number. AUMA identifies the original build from the commission number. For a new actuator, add the valve type, required torque or thrust at the worst case, number of turns or swing angle, operating time, mounting flange to ISO 5210 or ISO 5211, stem or shaft dimensions, duty (open-close or modulating), supply voltage and frequency, control signals or fieldbus, and the hazardous-area marking required on site.

Facts checked against AUMA product information and the company history published by AUMA, October 2026.

FAQ

Questions about the AUMA FQM/FQMEx Fail-Safe Unit for Part-Turn

Answers from our engineering team on installation, compatibility and integration.

01How does the AUMA FQM move the valve without electrical power?
The AUMA FQM uses a constant force spring motor. The spring is kept wound during standard operation and released by a solenoid when a fail-safe operation is initiated. The stored mechanical energy drives the valve to the selected OPEN or CLOSED position through a planetary gearing.
02Which SIL levels does the AUMA FQM support?
In the SIL version, AUMA specifies safe OPENING/CLOSING up to SIL 2 (HFT=0) or SIL 3 (HFT=1) according to IEC 61508, safe end position feedback up to SIL 2 and EN ISO 13849 safe end position feedback up to PL c.
03Which actuators can the AUMA FQM be combined with?
The FQM is combined with AUMA SQ, SQR, SQEx and SQREx part-turn actuators, from FQM 05.1 with SQ 05.2 up to FQM 12.1 with SQ 12.2. It is intended for butterfly valves, ball valves and plug valves at a 90 degree swing angle.
04Is there an explosion-proof version of the AUMA FQM?
Yes. The FQMEx data sheet lists ATEX II 2G Ex db eb IIB T4 Gb and IECEx Ex db eb IIB T4 Gb. AUMA’s FQM/FQMEx product page also lists an FM approval (Class I Div 1 Groups C, D T4; Class I Zone 1 Group IIB T4) that is not shown on the data sheet, so confirm FM certification for your configuration when ordering. An optional fire-protection version is also offered.
05Is Seven Star LLC a trusted supplier for AUMA products?
Yes. Seven Star LLC supplies AUMA products to customers in Oman and the GCC and can provide the manufacturer documentation and technical support on request.