Brand:

ifm IFT203 Inductive Sensor M12, 4 mm, Stainless, IP69K

Description

ifm IFT203 Inductive Sensor M12, 4 mm, Stainless, IP69K

The ifm IFT203 is an inductive sensor in a stainless steel (316L) M12 x 1 housing, 45 mm long, with a PEEK sensing face and a flush-mounting range of 4 mm. It is designed for washdown: protection IP68 and IP69K, resistance to high-pressure cleaning with aggressive agents, and an ambient range of 0 to 100 degrees Celsius. It switches at 800 Hz and has an M12 connector with three gold-plated contacts.

Tightening torque is 15 Nm. Seven Star LLC supplies the IFT203 in Oman and the GCC as an independent supplier.

IFT203 technical specifications

The table lists the values published by the manufacturer for the IFT203. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.

Parameter Specification
Manufacturer / part number ifm electronic / IFT203
Sensing range [mm] 4
Thread designation M12 x 1
Dimensions [mm] M12 x 1 / L = 45
Mounting flush mountable
Real sensing range Sr [mm] 4 ± 10 %
Operating distance [mm] 0 to 3.24
Hysteresis [% of Sr] 1 to 20
Operating voltage [V] 10 to 30 DC
Current consumption [mA] < 10
Electrical design PNP
Output function normally open
Permanent current rating of switching output DC [mA] 100
Switching frequency DC [Hz] 800
Ambient temperature [°C] 0 to 100
Protection IP 68; IP 69K ("COP")
Weight [g] 27
Materials housing: stainless steel (316L/1.4404); sensing face: PEEK natural; LED window: PEI; lock nuts: stainless steel (316L/1.4404)
Connector 1 x M12; coding: A; Contacts: 3, gold-plated
MTTF [years] 1134

How the IFT203 works

An inductive proximity sensor such as the IFT203 generates a high-frequency magnetic field at its sensing face. When a metal target enters the field, eddy currents damp the oscillation, and the electronics switch the output. The real sensing range is stated for a standard steel target; other metals are detected at a shorter distance according to the correction factors in the table. No contact is made with the target, so there is no wear and the sensor is unaffected by dirt, oil or moisture on the target.

Where the IFT203 fits and related parts

The IFT203 shares the electrical data of the IFS204 but changes the housing material, protection and the temperature window. Use the IFT203 where the IFS204 would be corroded or damaged by cleaning. The IGS232 is the choice for wide cold-to-hot temperature range in brass.

Selection and ordering checklist for the IFT203

Work through the points below before you confirm the order, so that the IFT203 you receive is the one your machine or plant needs.

  • Check the stainless steel 316L housing suits the environment
  • Check temperature 0 to 100 degrees Celsius
  • Confirm the 15 Nm tightening torque
  • Check the plug connector
  • Check the sensing range 4 mm

The manufacturer lists this article under the type designation Inductive sensor, IFB3004BBPKG/V4A/US-104. The article number IFT203 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.

Installation, commissioning and maintenance

Screw the sensor into a bracket or tapped hole, locking it with the two supplied nuts within the stated torque. Flush or non-flush mounting decides how much free metal-free space is needed around the sensing face, so follow the mounting entry in the table. Align the target path with the sensing axis and set the working distance with margin below the stated operating distance, to allow for temperature drift. In commissioning, check the LED while moving the target through the range. Inspect the sensing face for impact and the cable or connector for damage.

Use the correct torque and do not damage the PEEK face with tools. Keep the connector fully seated, because IP69K only applies with a suitable mating plug. Use stainless fixings to avoid galvanic problems.

Typical applications in Oman and the GCC

Washdown areas, food and beverage, water treatment, and marine or coastal installations. In Oman and the GCC the stainless housing resists salt-laden air.

Inductive sensors are among the most robust parts on a machine, but heat, vibration and repeated impacts still end their life. Choose the housing material and range to suit the environment, and keep spares of the common thread sizes.

IFT203 compared with related ifm types

The table places the IFT203 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.

Part number Key characteristics Note
IG5593 M18 flush, 5 mm, 2-wire, 10-55 V DC, cable Related type
IFS204 M12 flush, 4 mm, brass, plug Related type
IFT203 M12 flush, 4 mm, stainless, IP69K This page
IGS232 M18 flush, 8 mm, -40 to 85 C, IP69K Related type
IIS204 M30 flush, 15 mm, brass Related type
IE5352 M8 non-flush, 5 mm, 0.3 m cable + M12 Related type

Information to send with an RFQ for the IFT203

To prepare an accurate offer for the IFT203, please include the following with your enquiry:

  • Thread size and body length required
  • Sensing range and the target material
  • Flush or non-flush mounting
  • Output wiring and connector or cable length
  • Quantity and delivery location

Storage, handling and spares for the ifm IFT203

Keep the ifm IFT203 in its original packaging until installation, and store it indoors in a dry place without condensation. Protect connectors and cable ends from dust and moisture. In hot GCC warehouses, check that the storage temperature stays inside the range given in the manufacturer datasheet before the unit is installed.

  • Check the article number and connection type against the drawing before mounting.
  • Use the mounting accessories and connection cables recommended for the device, and route cables away from power wiring.
  • Keep at least one spare unit of each type used on critical machines, so that a failed device can be swapped quickly.
  • Record the device type, firmware version where relevant, and parameter settings, so that a replacement can be set up the same way.

When you order the ifm IFT203, include the matching cables, connectors or mounting parts in the same RFQ. This avoids delays at commissioning when a small accessory is missing.

Documents and quotation

No datasheet is attached to this page. Send us the part number IFT203 and we will confirm which documents are available, such as the datasheet and operating instructions, and for IO-Link devices the device description file.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.

Other Models in the Ifm Ind Range

Seven Star LLC supplies models from the Ifm Ind range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
ifm IG5593 Inductive Sensor M18, 5 mm, 2-Wire, CableInductive Proximity SensorsView details
ifm IFS204 Inductive Sensor M12, 4 mm, Brass, M12 PlugInductive Proximity SensorsView details
ifm IFT203 Inductive Sensor M12, 4 mm, Stainless, IP69KInductive Proximity SensorsYou are viewing this model
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm IFT203 Inductive Sensor M12, 4 mm, Stainless,

Answers from our engineering team on installation, compatibility and integration.

01What is the housing material of the ifm IFT203?
Stainless steel 316L (1.4404) with a PEEK sensing face.
02What protection does the IFT203 have?
IP68 and IP69K. This is the value published by the manufacturer for the IFT203; confirm details before ordering.
03What is the temperature range of the IFT203?
0 to 100 degrees Celsius ambient. This is the value published by the manufacturer for the IFT203; confirm details before ordering.
04What is the switching frequency of the IFT203?
800 Hz. This is the value published by the manufacturer for the IFT203; confirm details before ordering.
05What is the tightening torque of the IFT203?
15 Nm. This is the value published by the manufacturer for the IFT203; confirm details before ordering.