- Automation & ControlView all 2,859 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: SICK
SICK IME12-04BPOZC0S M12 Inductive Sensor, 4 mm, PNP NC
Description
SICK IME12-04BPOZC0S in brief
Small cylinders and tight fixtures call for a slim sensor, and the SICK IME12-04BPOZC0S (part number 1040768) answers with an M12 x 1 thread, a 65 mm brass body and flush mounting. Its nominal range is 4 mm with a safe sensing range of 3.24 mm. The output is PNP normally closed, a function that many safety-minded control designers like, because a broken cable or lost supply produces the same signal as a target in front of the sensor.
Normally closed logic and speed
The letter O in the type code marks the normally-closed function: the output is conducting while the sensor face is free and drops when metal approaches. Combined with a 2,000 Hz switching frequency, the highest in this lane’s inductive group, this suits quick rotating or reciprocating parts. The datasheet lists hysteresis of 5 to 15 percent, reproducibility of up to 2 percent and a time delay before availability of up to 100 ms.
- Sn 4 mm, Sa 3.24 mm, flush
- Reduction factors: stainless about 0.8, aluminium about 0.45, copper and brass about 0.4
- Maximum tightening torque 12 Nm
- Housing length 65 mm, thread length 48 mm
IME12-04BPOZC0S data table
| Parameter | Value |
|---|---|
| Part number | 1040768 |
| Thread / design | M12 x 1, standard design |
| Installation | Flush |
| Sn / Sa | 4 mm / 3.24 mm |
| Supply | 10 V DC to 30 V DC |
| Output | PNP, normally closed, DC 3-wire |
| Switching frequency | 2,000 Hz |
| Connection | Male connector M12, 4-pin |
| Housing length / thread length | 65 mm / 48 mm |
| Tightening torque | Up to 12 Nm |
| Material | Brass nickel-plated, sensing face PA 66 |
| Enclosure rating | IP67 |
| Operating temperature | Minus 25 to plus 75 C |
| MTTFD | 1,735 years |
How IME12-04BPOZC0S differs from other IME variants
The IME12-04BPOZC0S is the smallest and fastest type in this lane: M12 thread, 4 mm range, 2,000 Hz, normally-closed PNP output. The M18 types switch at 1,000 Hz or 200 Hz and the M30 types at 500 Hz or 100 Hz, all with normally-open outputs. Choose it for small targets, high repetition rates or fail-safe style logic, and not for large gaps.
Applications
Typical roles are cylinder-piston position sensing, rotating cam detection, tool presence on small spindles and fast part counting. In GCC packaging and bottling equipment the M12 size is a common standard, so spare parts often involve this size.
Selection and wiring
Be careful when specifying normally closed devices as replacements for normally open ones; the PLC logic must match. Ensure a PNP sinking input and keep the target to about two thirds of the safe sensing range. With only 12 Nm allowed, never use long levers to tighten the nuts.
Installation and test
Insert the sensor into a bracket bore, secure with the nuts and align the target so that the gap stays constant. Check the output with a metal target and with a free face to confirm the correct logic state.
Maintenance
Examine for bent housings, damaged plugs and swarf. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Remember that an M12 plug only supports the sensor if the mating cordset is of equal quality: use a 4-pin female connector with a clean seal, and route the cable so that it cannot be pulled when the machine moves. The IME12-04BPOZC0S has short-circuit protection and power-up pulse protection, EMC according to EN 60947-5-2 and shock resistance of 30 g for 11 ms. A flush M12 with only 3.24 mm safe range needs well-controlled gaps, so check bearing play and mounting stiffness before trusting a design margin. When requesting a quote, give the full type code IME12-04BPOZC0S, part number 1040768, quantity and delivery location in Oman or the GCC.
A short word on normally closed outputs in control design: the PLC program should treat the input as active when the target is absent. Many engineers add a debounce of a few milliseconds even at 2,000 Hz so that contact bounce of a rotating part is ignored, and they test the failure case by unplugging the sensor to see that the machine reacts safely. Because the IME12-04BPOZC0S is a standard, non-safety sensor with 0 percent diagnostic coverage and an MTTFD of 1,735 years, it should not be the only protective measure for personnel, but it works well as a position feedback device within a properly designed safety concept.
For bench testing, a simple steel washer held in front of the sensing face and a multimeter on the output are enough to confirm function: with the face free, the output of the IME12-04BPOZC0S should sit near the supply voltage minus the 2 V maximum drop, and with the washer within the sensing distance it should drop to nearly zero. If the readings are inverted, the sensor in hand is probably a normally-open code, which is a common mix-up between the O and S letters in the type designation. Keep a printed type-code legend in the tool crib to avoid such errors.
Questions buyers ask about IME12-04BPOZC0S
What is special about SICK IME12-04BPOZC0S output? It is PNP normally closed: the output is active with no metal present and switches off when a target approaches the 4 mm sensing range.
How fast is IME12-04BPOZC0S? Switching frequency is 2,000 Hz, reproducibility up to 2 percent, hysteresis 5 to 15 percent and availability within 100 ms.
What are the dimensions of IME12-04BPOZC0S? M12 x 1 standard design, 65 mm long with 48 mm of thread, brass nickel-plated, up to 12 Nm tightening torque.
Can IME12-04BPOZC0S be mounted flush? Yes, the installation type is flush with a nominal range of 4 mm and a safe sensing range of 3.24 mm.
What connector does IME12-04BPOZC0S use? A 4-pin M12 male connector on a DC 3-wire PNP circuit, 10 to 30 V DC supply.
Documents and quotation
The manufacturer datasheet for IME12-04BPOZC0S is attached to this listing. Send an RFQ with the part number IME12-04BPOZC0S, quantity and delivery point in Oman or the GCC for availability and lead time.
Datasheets & Documents
- Datasheet SICK IME12-04BPOZC0S M12 Inductive Sensor, 4 mm, PNP NC Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
SICK is the German maker of industrial sensors: photoelectric and proximity sensors, safety laser scanners and light curtains, encoders, distance sensors, code readers and gas analysers. Erwin Sick, an optics engineer, founded it in Munich in 1946, and in 1952 it introduced its first marketable accident-prevention light curtain, which protected press operators by stopping the machine when a hand broke the light beam. The company moved to Waldkirch in the Black Forest in 1956 and is still headquartered there. It is a privately held company, and has been an Aktiengesellschaft (AG) since 1996.
SICK company profile
| Founded | 1946, Munich, Germany, by Erwin Sick (1909–1988) |
|---|---|
| Headquarters | Waldkirch, Baden-Württemberg, Germany (since 1956) |
| Ownership | Privately held; after the founder's death in 1988 his widow Gisela Sick became the main shareholder. Legal form SICK AG since 1996 |
| Size | More than 12,000 employees and group revenue of about EUR 2.3 billion (company figures for 2023) |
| First breakthrough | Accident-prevention light curtain for presses, shown in Hanover in 1952 |
| International growth | First foreign subsidiary in France in 1972, United States in 1976; today sales and service companies worldwide |
| Product families | Photoelectric, inductive, capacitive, magnetic and ultrasonic sensors; safety laser scanners, light curtains, safety controllers and relays; encoders and motor feedback systems; distance sensors and LiDAR; barcode and 2D code readers and machine vision; gas analysers, dust and flow measurement for process and emissions monitoring |
Milestones
- 1946: Erwin Sick receives a licence to run his engineering firm in Munich.
- 1952: The first marketable accident-prevention light curtain is presented in Hanover and goes into series production.
- 1956: The company moves to Waldkirch with 25 employees.
- 1972 and 1976: Subsidiaries are founded in France and the United States.
- 1996: SICK becomes an Aktiengesellschaft.
- Today: Sensors for factory and logistics automation, machine safety and process analysis, with a large share of revenue outside Germany.
Choosing a SICK sensor
For object detection, the sensing principle comes first. A retro-reflective sensor (WL series) sends light to a reflector and switches when an object breaks the beam; it is reliable over long distances and easy to align. A sensor with background suppression (WTB series) detects an object at a set distance and ignores what is behind it, which suits conveyors with shiny or dark backgrounds. A through-beam pair (WS/WE) gives the longest range and the highest reliability in dust. For transparent bottles and film, use a model built for transparent objects (for example WL12G-3B or WL150-P420). The digits in the code also matter: "P" usually means a PNP output and "N" NPN, and the last digits set the connector or cable. For machine guarding, a safety laser scanner such as nanoScan3 or microScan3 protects an area, while a safety controller such as Flexi Soft combines several safety devices.
Where SICK products are used
In Oman and the GCC, SICK sensors are used in packaging and bottling lines, food and beverage plants, logistics and airport baggage handling, cement and steel plants, ports and cranes, automated warehouses, and on machines built by European OEMs. SICK safety scanners guard robots and automated guided vehicles, and its encoders give position feedback on motors, hoists and conveyors.
SICK products we list
| Family | Examples |
|---|---|
| Photoelectric sensors | WL12-3P2431, WTB12-3P2431, GTB6-P4211, VL18-4P3240, WL12G-3B2531, WS/WE100, KT5W contrast, W26 IO-Link |
| Proximity, cylinder and ultrasonic sensors | IME12-08NPSZC0S, IME18-05BPSZC0S, MZT8, UM18 4-20 mA, UM30, UFN3 fork |
| Machine safety | nanoScan3, microScan3, S300 Professional, Flexi Soft FX3-CPU1, FX3-XTIO, ReLy OSSD |
| Encoders and motor feedback | DFS60B, AFM60 PROFINET, AFS60 SSI, ATM60 PROFIBUS, SRS50, EFS50 |
| Distance sensors and code readers | DT50, DL50, DT35, Lector632 |
Ordering SICK products: what we need
Send the type code and the 7-digit SICK part number from the label (for example WTB12-3P2431 together with its part number). For a replacement sensor, add the output (PNP or NPN), connection (M8, M12 or cable) and sensing distance. For encoders, add the interface (incremental, SSI, PROFIBUS, PROFINET), resolution and shaft type. For safety scanners, tell us the model and whether the existing configuration needs to be kept.
Frequently requested SICK models: SICK RT-P3231 ZoneControl Background Suppression Sensor.
Facts checked against SICK's published company history and annual figures, October 2026.
Browse SICK products by category: Sensors & Transmitters.
FAQ
Questions about the SICK IME12-04BPOZC0S M12 Inductive Sensor, 4 mm,
Answers from our engineering team on installation, compatibility and integration.
01What is special about SICK IME12-04BPOZC0S output?
It is PNP normally closed: the output is active with no metal present and switches off when a target approaches the 4 mm sensing range.
02How fast is IME12-04BPOZC0S?
Switching frequency is 2,000 Hz, reproducibility up to 2 percent, hysteresis 5 to 15 percent and availability within 100 ms.
03What are the dimensions of IME12-04BPOZC0S?
M12 x 1 standard design, 65 mm long with 48 mm of thread, brass nickel-plated, up to 12 Nm tightening torque.
04Can IME12-04BPOZC0S be mounted flush?
Yes, the installation type is flush with a nominal range of 4 mm and a safe sensing range of 3.24 mm.
05What connector does IME12-04BPOZC0S use?
A 4-pin M12 male connector on a DC 3-wire PNP circuit, 10 to 30 V DC supply.


















Reviews
There are no reviews yet.