- Automation & ControlView all 2,779 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Endress+Hauser (E & H)
Endress+Hauser CM82 Liquiline Compact Transmitter
Description
Endress+Hauser CM82 Liquiline Compact transmitter
The Endress+Hauser CM82 is a tiny two-wire transmitter that screws onto a Memosens sensor head, turning a sensor plus 4 to 20 mA and HART output into a single device. It supports pH, ORP, combined pH/ORP, contacting conductivity and oxygen sensors with the blue Memosens plug-in head, and it can be configured through the optional Bluetooth LE interface and the SmartBlue app.
Because it fits into an assembly and needs no separate power supply, the CM82 is attractive for remote measuring points, skid-built systems and retrofits where a full-size transmitter would be overkill.
CM82 benefits
- Two-wire, loop-powered with 4 to 20 mA and HART
- Optional Bluetooth LE for configuration with a smartphone or tablet
- Space-saving: fits into an assembly
- Works with pH, ORP, pH/ORP, conductivity and oxygen Memosens sensors
- Dust, steam, rain, snow, heat and cold tolerant housing
- Same operating concept as the Liquiline platform
CM82 data table
| Parameter | Value |
|---|---|
| Output | 4 to 20 mA with HART, galvanically isolated |
| Supply voltage | 12.6 to 30 V DC (failure current above 20 mA); 14 to 30 V DC (below 4 mA) |
| Wireless | Bluetooth LE, optional |
| Cable lengths | 3 m, 7 m or 15 m |
| Ambient temperature | Minus 20 to 85 °C (limits tied to process temperature) |
| Storage temperature | Minus 40 to 85 °C |
| Protection | IP 67, NEMA Type 6 |
| Housing | PEEK 151, EPDM strain relief |
| Weight | About 42 g without cable |
| Impact rating | 1 J (IK06) |
| Current output resolution | Under plus or minus 20 microamps at 4 mA |
How CM82 differs from CM72 and CM442
The CM72 is the single-parameter twin: it is configured permanently at the factory for one sensor type and range, has an LED indicator and offers 4 to 20 mA only, without HART or Bluetooth in its datasheet. The CM82 can be configured after delivery, adds HART, optional Bluetooth LE and supports combined pH/ORP sensors. Compared with a CM442 field transmitter, the CM82 has one channel, no display and no relays, but it weighs 42 g instead of 2.1 kg.
Applications in Oman and the GCC
Fermenters, process-water loops, aeration basins, small water skids and pumping stations are all places where a CM82 replaces a conventional transmitter and cable run. In hot, dusty or humid conditions the sealed housing is an advantage.
Installation and commissioning
Plug the CM82 onto the Memosens sensor, route the two-wire loop to the PLC input with the supply voltage in range, then configure it with SmartBlue or over HART. Verify the 4 and 20 mA scaling against the sensor range.
Maintenance
There is no display to read, so check diagnostics through HART or Bluetooth, and keep the sensor calibrated in the laboratory. Replacement of the CM82 is a matter of plugging in a new unit.
Two-wire power, output and cable choices
The CM82 is powered over its 4 to 20 mA loop, so there is no separate supply and no power wiring in the field. The datasheet gives a supply voltage of 12.6 to 30 V DC when the failure current is set above 20 mA, and 14 to 30 V DC when the failure current is set below 4 mA. The output is 4 to 20 mA, galvanically isolated from the sensor circuit, with HART on the same pair of wires. Resolution of the current output is better than plus or minus 20 microamps at 4 mA and plus or minus 50 microamps between 4 and 20 mA, and the output reacts with a t90 of 500 ms at most for a step from 0 to 20 mA. Fixed cables of 3 m, 7 m or 15 m are offered.
The device weighs about 42 g without cable, and roughly 48 g more for each extra metre of cable, with total weights of about 190 g, 380 g or 760 g for the three standard lengths. The housing and cover are PEEK 151, with an EPDM strain relief and an optical waveguide in transparent polycarbonate, rated for mechanical impact of 1 J (IK06).
Bluetooth LE and the SmartBlue app
A Bluetooth LE interface is optional. Operators install the SmartBlue app on an Android or iOS device and connect point to point to the transmitter, which means a measuring point on a roof or in a pit can be checked from a safe distance. According to the datasheet, the transmitter is invisible to Bluetooth without the SmartBlue app, only one connection to a smartphone or tablet is established at a time, and the interface can be disabled in the app. A disabled interface can be re-enabled only through HART, a design that keeps the wireless link under the control of the plant.
Operating limits
The ambient temperature range is minus 20 to 85 degrees Celsius, but the datasheet ties the real limit to the process temperature: with ambient up to 60 degrees Celsius, the process may reach 100 degrees Celsius continuously or 140 degrees Celsius for less than two hours for sterilization. The enclosure is IP 67 and NEMA Type 6, with storage from minus 40 to 85 degrees Celsius.
Selection checklist for the CM82
Before ordering a CM82, list the sensor type and range expected, the cable length from sensor to loop junction, the PLC input type and whether a HART handheld or Bluetooth smartphone will be used for service. Check that the failure-current setting you plan to use (above 20 mA or below 4 mA) is compatible with the loop supply voltage, since the minimum voltage differs by 1.4 V between the two settings. Confirm the maximum ambient and process temperatures against the stated relationship, especially near hot assemblies or during sterilization.
Documents and quotation
The datasheet for the CM82 is attached. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send an RFQ with CM82, cable length, Bluetooth option and quantity.
What to Include in Your Endress+Hauser CM82 Enquiry
An accurate quotation for the Endress+Hauser CM82 depends on a few details. Please share the complete part number, any suffix codes for options or approvals, the operating conditions at the installation point, and whether certificates of conformity or test reports must ship with the goods. It also helps to know whether the unit is for planned maintenance, a shutdown or an urgent breakdown, because that decides how it is sourced and shipped. With this information our team can check compatibility with your existing liquid analytical systems and reply with availability and a realistic delivery estimate.
Datasheets & Documents
- Datasheet Endress+Hauser CM82 Liquiline Compact Transmitter Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Endress+Hauser makes process measurement instruments for flow, level, pressure, temperature and liquid analysis. Georg H. Endress and Ludwig Hauser started the business in Lörrach, Germany, on 1 February 1953, first selling level meters, and the Endress+Hauser name has been used since 1957. The group is headquartered in Reinach, Switzerland, and has been wholly owned by the Endress family since 1975.
Seven Star LLC is an independent supplier listing Endress+Hauser flowmeters, level and pressure transmitters, temperature assemblies and liquid analysis products for buyers in Oman and the GCC. Instruments are matched from the full order code on the nameplate.
Endress+Hauser company profile
| Origin | Founded in Lörrach, Germany, on 1 February 1953 by the Swiss engineer Georg H. Endress and Ludwig Hauser |
|---|---|
| Headquarters | Endress+Hauser AG, Reinach (Basel-Landschaft), Switzerland |
| Ownership | Family owned; the Endress family has been the sole shareholder since 1975, and a family charter commits the company to stay family owned |
| Size | About 16,500 employees and sales of about EUR 3.7 billion (2023, as reported by the company) |
| Product families | Proline flowmeters, Micropilot and Levelflex radar, Liquiphant switches, Cerabar and Deltabar pressure, iTEMP and iTHERM temperature, Liquiline and Memosens liquid analysis |
Milestones
- 1953: Georg H. Endress and Ludwig Hauser start the business in Lörrach on 1 February, first selling level meters.
- 1957: The Endress+Hauser name comes into use.
- 1975: The Endress family becomes sole shareholder.
- 2023: About 16,500 employees and sales of about EUR 3.7 billion, as reported by the company.
Endress+Hauser product lines
| Line | Measuring principle | Typical use |
|---|---|---|
| Promass F 300, Promass 80F, 83F/84F | Coriolis mass flow | Direct mass flow and density of liquids and gases, hydrocarbon transfer and chemical dosing |
| Promag P 300, P 500, H 300, W 400, W 10, 50P | Electromagnetic flow | Water, wastewater, slurries and other conductive liquids |
| Prowirl F 200, 72F | Vortex flow | Steam, gas and low-viscosity liquids |
| Prosonic Flow 92F, t-mass 65F | Ultrasonic and thermal mass flow | Water lines; compressed air and industrial gases |
| Micropilot FMR62, FMR67, FMR60, FMR10B, FMR20, FMR50, FMR52 | Free-space radar level, 80 GHz and 26 GHz | Tanks, process vessels, silos and open water channels |
| Levelflex FMP51, FMP50, FMP54, FMP55 | Guided wave radar level | Level and interface in vessels, separators and bypass chambers |
| Liquiphant FTL51, Prosonic S FMU90 | Vibronic point level; ultrasonic level | High and low level alarms, pump protection, open channel flow |
| Cerabar PMC71B, PMP51B, PMP71, Deltabar PMD78B, PMD75 | Pressure and differential pressure | Process pressure, hydrostatic level and DP flow |
| iTEMP TMT82, TMT162, iTHERM TM101, TR66, TR10 | Temperature transmitters and thermometers | RTD and thermocouple points with thermowells |
| Liquiline CM444, CM442, Memosens CPS11E, Stamolys reagents | Liquid analysis | pH, ORP, conductivity, dissolved oxygen and nutrient analysis in water treatment and process |
Where Endress+Hauser instruments are used
In Oman and the GCC, Endress+Hauser instruments are common in oil and gas production and processing, refineries and petrochemicals, desalination and water networks, wastewater treatment, power plants and food and beverage plants. Coriolis meters measure hydrocarbon and chemical flows, electromagnetic meters cover water and wastewater, radar transmitters handle tank and silo level, and Liquiline analysers monitor water quality. Proline 300 and 500 flowmeters include Heartbeat Technology for in-situ verification, which reduces the need to remove a meter for checks.
Ordering Endress+Hauser instruments: what we need
The order code on the nameplate (for example PMP71-1QA1S11RDADU) defines every option: measuring range, process connection, materials, output, approvals and display. Send it with the serial number; Endress+Hauser can retrieve the original configuration from the serial number. For a new instrument add the medium, operating and design pressure and temperature, range, line size or tank geometry, process connection, wetted materials, output or protocol (4-20 mA HART, PROFIBUS, FOUNDATION Fieldbus, Modbus) and the hazardous-area approval required. Older models such as Promass 80/83 or Micropilot M are replaced by current Proline or 80 GHz Micropilot devices.
Facts checked against Endress+Hauser company history and product information, October 2026.
Browse Endress+Hauser products by category: Flowmeters, Level Transmitter, Pressure Instrumentation, Temperature, Liquid Analysis Sensors, Liquid Analytical Systems.
FAQ
Questions about the Endress+Hauser CM82 Liquiline Compact Transmitter
Answers from our engineering team on installation, compatibility and integration.
01Does the CM82 need a separate power supply?
No, it is a two-wire device powered through the 4 to 20 mA loop, requiring 12.6 to 30 V DC at the terminals depending on the failure current setting.
02Which sensors work with the CM82?
Memosens pH, ORP, combined pH/ORP, contacting conductivity and oxygen sensors with the blue plug-in head.
03Does the CM82 have Bluetooth?
Bluetooth LE is optional, with the SmartBlue app used for commissioning and maintenance.
04How big is the CM82?
It weighs about 42 g without cable and is about 125 mm long over its housing, small enough to fit into an assembly.
05What protection does the CM82 have?
IP 67 and NEMA Type 6, with a PEEK housing rated for 1 J mechanical impact.


















Reviews
There are no reviews yet.