Endress+Hauser Promag W 10 Electromagnetic Flowmeter

Name: Endress+Hauser Promag W 10 Flowmeter – Manual & Price Quote
Brand: Endress+Hauser (E & H)

Description

Overview

The Endress+Hauser Promag W 10 is a basic electromagnetic flowmeter purpose-built for water and wastewater applications, covering an exceptionally wide nominal diameter range with lap-joint flange connections for straightforward installation. It delivers accurate volume flow measurement with international drinking water approvals, making it a natural fit for municipal and industrial water networks.

With engineering support in Muscat, Seven Star LLC supplies the Endress+Hauser Promag W 10 to water utilities and industrial facilities across the Sultanate of Oman and the wider GCC, with manufacturer documentation and local technical support.

Measurement Principle

The Endress+Hauser Promag W 10 operates on Faraday’s law of electromagnetic induction. As conductive water flows through the magnetic field generated across the measuring tube, it induces a voltage proportional to flow velocity, which is picked up by measuring electrodes in 1.4435 (316L) stainless steel or Alloy C22 and processed into volume flow, conductivity, and mass flow output.

Because the measurement depends only on fluid conductivity and velocity, it is virtually unaffected by pressure, density, temperature, or viscosity variation. The obstruction-free measuring tube results in zero pressure loss and no moving parts to wear, giving water utilities a maintenance-free, long-service-life metering solution across large-diameter transmission mains and smaller distribution lines alike.

Engineering Design of the Endress+Hauser Promag W 10

The sensor covers an exceptionally wide nominal diameter range of DN 25 to DN 3000 (1 inch to 120 inch), with liner materials of hard rubber, polyurethane, or PTFE selected to match medium temperature and water chemistry. The sensor housing is AlSi10Mg coated aluminum for DN 25 to DN 300, and protective-varnished carbon steel for DN 350 to DN 2000, with degree of protection up to IP68 (Type 6P) for buried or submerged installation.

The transmitter supports operation via the SmartBlue mobile app or an optional touch-screen display, with guided parameterization that simplifies commissioning both in advance and in the field. Heartbeat Technology provides integrated verification for ongoing diagnostics, and system integration is available via HART or Modbus RS485.

Key Features

The Endress+Hauser Promag W 10 is engineered for reliable, low-maintenance water metering, and the Endress+Hauser Promag W 10 is trusted across municipal and industrial water networks throughout the region:

Covers an exceptionally wide nominal diameter range from DN 25 to DN 3000 (1 inch to 120 inch).
Delivers volume flow accuracy of ±0.5% o.r. ±1 mm/s under standard conditions.
Holds international drinking water approvals for municipal supply applications.
Achieves degree of protection up to IP68 (Type 6P) for buried or submerged installation.
Supports commissioning via the SmartBlue mobile app or an optional touch-screen display.
Includes Heartbeat Technology for integrated verification and ongoing diagnostics.
Offers liner materials in hard rubber, polyurethane, or PTFE to suit water chemistry and temperature.
Introduces zero pressure loss thanks to its full-bore, obstruction-free flow path.

Industrial Applications

The Endress+Hauser Promag W 10 is specified across municipal water distribution networks, wastewater treatment plants, raw water intake and transmission mains, and industrial water metering points where a wide diameter range and drinking water certification are required. Its lap-joint flange design also simplifies retrofit into existing pipeline infrastructure during network expansion or meter replacement programs.

With manufacturer documentation, Seven Star LLC supplies the Promag W 10 to water and wastewater utilities throughout Oman and the GCC, including projects in the Sohar and Salalah economic zones, municipal supply networks, and desalination and district cooling plants, with technical support and lead time confirmed at quotation.

Technical Specifications

Key technical parameters for the Endress+Hauser Promag W 10 are summarized below.

Parameter	Specification
Model	Endress+Hauser Proline Promag W 10 (5WBB)
Measuring Principle	Electromagnetic (Faraday’s law)
Nominal Diameter	DN 25 to DN 3000 (1″ to 120″)
Volume Flow Accuracy	±0.5% o.r. ±1 mm/s
Measuring Range	0.5 to 263,000 m³/h
Max Process Pressure	PN 40, Class 300, 20K
Liner Material	Hard rubber, polyurethane, or PTFE
Degree of Protection	IP66/67 standard, IP68 (Type 6P) optional
Communication	HART, Modbus RS485, SmartBlue app

Why Choose Seven Star LLC for Endress+Hauser Large-Diameter Water Flowmeters

A water utility flowmeter spanning DN25 to DN3000 covers everything from a small distribution branch to a major transmission main, and getting liner material, drinking-water approval, and lap-joint flange sizing right matters more as pipe diameter — and the cost of a wrong shipment — grows. Seven Star LLC confirms the correct Promag W 10 configuration against your network’s actual diameter, pressure class, and water chemistry before order placement, drawing on our genuine Endress+Hauser channel status across Oman and the GCC. We also support municipal and desalination-linked water authorities in Muscat, Sohar, and Salalah with coordinated logistics for large-diameter shipments and Heartbeat Technology verification planning so meters stay defensible over their service life, and provide guidance on SmartBlue app-based commissioning to reduce the technician time needed at remote or hard-to-access metering chambers.

Request a Quote for Endress+Hauser Promag W 10 Electromagnetic Flowmeter

For water and wastewater networks standardizing on the Endress+Hauser Promag W 10, Seven Star LLC is ready to support your project with a formal RFQ, technical datasheet, and delivery timeline. Our instrumentation engineers provide technical support with selection across Oman and the GCC, with lead time confirmed at quotation. Working closely with plant engineers in the region, contact our instrumentation division today to configure the right Promag W 10 variant for your network, complete with genuine calibration certificates and full documentation.

Reviews

There are no reviews yet.

How would you rate this product?

About brand

Level, flow and pressure measurement account for most of the Endress+Hauser instruments engineers ask us about, and each device is defined by the order code on its nameplate. Endress+Hauser, founded in 1953 and based in Reinach, Switzerland, builds process instrumentation for liquids, gases and bulk solids. Seven Star LLC is an independent supplier listing Endress+Hauser (E+H) flowmeters, radar and vibronic level instruments, pressure and temperature transmitters and liquid analysis equipment for plants in Oman and the GCC.

Endress+Hauser product families on this page

Level is the largest group: Micropilot free-space radar (FMR10B, FMR62 and the FMR67 for bulk solids, all 80 GHz), Levelflex guided radar (FMP50, and the FMP55 for interface measurement), the Liquiphant FTL51 vibronic point level switch and the Prosonic S FMU90 ultrasonic transmitter. Flow covers Proline Promag electromagnetic flowmeters (Promag P 300, Promag W 400) and the Prowirl F 200 vortex meter. Pressure is represented by the Cerabar PMP51B, temperature by the iTEMP TMT82 HART transmitter. For liquid analysis the listing has the Liquiline CM444 multiparameter transmitter and Memosens sensors such as the CPS11E pH electrode.

Where Endress+Hauser instruments are used

Water and wastewater plants rely on Promag W meters, radar level and Liquiline analysis. Oil and gas, chemical and power plants specify Levelflex and Micropilot on tanks and separators, Prowirl on steam and gas, and Cerabar on process lines. Food and pharmaceutical producers use hygienic versions of the same families, and cement and mining sites use the FMR67 on silos.

Ordering Endress+Hauser instruments: what we need

Send the order code and, for a replacement, the serial number from the nameplate. The extended order code is better still, because it spells out every option. Without a code we need the medium, pressure and temperature, measuring span, process connection, wetted materials, output signal or fieldbus, power supply, display and the hazardous area approval required. For flowmeters add line size and liner, for radar the tank height and nozzle size.

Frequently Asked Questions

Is the Endress+Hauser Promag W 10 approved for drinking water applications?

Yes. The Promag W 10 holds international drinking water approvals, making it suitable for municipal water supply metering in addition to wastewater and industrial water applications.

What is the largest pipe size the Promag W 10 supports?

The Promag W 10 covers an exceptionally wide range from DN 25 to DN 3000 (1 inch to 120 inch), making it suitable for both small distribution branches and large transmission mains.

How is the Promag W 10 commissioned on site?

The transmitter supports guided parameterization via the SmartBlue mobile app or an optional touch-screen display, allowing technicians to configure the device in advance of installation and complete commissioning quickly in the field.

Can the Promag W 10 be installed underground or submerged?

Yes, with the IP68 (Type 6P) protection option and protective varnish rated to EN ISO 12944 corrosion categories, the sensor remote version is suitable for buried or submerged installation typical of water transmission mains.

Is Seven Star LLC an experienced supply partner for Endress+Hauser products?

Yes. Seven Star LLC is an experienced supplier of Endress+Hauser in Oman and the GCC, supplying genuine factory-calibrated instruments with full documentation, warranty, and local technical support.

+968 90155212