Brand:

Honeywell DCP250 1/4 DIN Controller Programmer, Graphic Display

Description

Honeywell DCP250 1/4 DIN controller and programmer with graphic display overview

The Honeywell DCP250 is a 1/4 DIN controller and programmer with a graphical text display, advanced control capability and modular I/O. It can run one or two control loops and includes a setpoint profiler, a datalogger with real time clock and a front USB host port. The manufacturer says its step-by-step wizard setup speeds up the initial configuration.

The colour-changing display uses a green or red backlight, so an alarm is easy to recognise from a distance, and the pages are laid out to show important process information on a single screen. Configuration files can be moved to and from a flash memory stick through the front USB port, which allows a unit to be cloned or replaced without connecting a PC.

This page summarises the manufacturer documentation for the Honeywell DCP250 for buyers in Oman and the GCC. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Key features of the DCP250

The following key features come from the manufacturer specification for the DCP250.

  • Single or two loop control with ON/OFF, PID heat only, heat/cool, valve motor drive, ratio and cascade control, and five PID sets for manual or automatic gain scheduling.
  • Profiler with up to 255 segments shared between up to 64 programs.
  • Datalogger with real time clock and 1 Mb of non-volatile flash memory, with trend display on the screen.
  • USB host port on the front for configuration files and for extracting logged data to a memory stick.
  • Seven alarms covering absolute, deviation, rate of change, sensor break, recorder memory and control power conditions.
  • Up to two analog inputs, up to nine outputs, a remote setpoint input and up to nine digital inputs.
  • Modbus RTU over RS485 (master or slave) and Modbus TCP over Ethernet, and Blue Control software for configuration.
  • Front panel sealed to IP66, with CE and UL conformity as standard.

DCP250 technical specifications

The table lists the main data for the DCP250 from the manufacturer specification sheet.

Parameter Value
Model DCP250
Format 1/4 DIN, 96 x 96 mm front bezel
Depth behind panel 117 mm
Weight 0.65 kg maximum
Control loops One or two
Analog inputs Up to two universal inputs, 10 samples per second, 16-bit resolution
Thermocouple accuracy 0.1 percent of full range plus or minus 1 LSD
Profiler 255 segments, up to 64 profiles
Alarms Seven, with start-up inhibit option
Digital inputs Up to nine
Outputs Up to nine: relay, logic or SSR driver, triac, analog DC, transmitter supply
Recording memory 1 Mb non-volatile flash with real time clock
Communication Modbus RS485, Modbus TCP Ethernet, USB host
Front panel sealing IP66 (IP65 at the front USB connector)
Power supply 100 to 240 V ac, 50/60 Hz, 20 VA; low voltage 20 to 48 V ac or 22 to 65 V dc
Operating temperature 0 to 55 degC, 20 to 90 percent RH non-condensing
Panel thickness 6.0 mm maximum

Typical applications in Oman and the GCC

The DCP250 is a stand-alone controller with logging, suitable for processes that need profiles, a record and network access. Typical uses in Oman and the GCC include the following.

  • Oil and gas: heat treatment and test furnaces, and cascade or ratio control on small heaters and exchangers.
  • Utilities and power: two-loop control of auxiliary systems with logged data for reporting.
  • Water and wastewater: laboratory and pilot plant control with recorded data.
  • Manufacturing: furnaces, kilns, environmental chambers and plastics machinery with profiles of up to 255 segments.

Selection and compatibility notes for the DCP250

Choose the DCP250 when a process needs a profile, a record of what happened and either two loops or cascade control. The 1/4 DIN UDC3500 is the alternative when you do not need a datalogger or a graphic display, and the 1/16 DIN DCP50 is the choice for simple profiles in small openings.

Select the communication option, the number of relay, logic and analog outputs and the supply voltage at the time of ordering. Dual relay modules have reinforced isolation and the front USB connector is optional. Confirm the panel is rigid and no thicker than 6.0 mm.

Installation and commissioning of the DCP250

Install the DCP250 in a rigid panel.

  • Cut the panel for the 1/4 DIN opening and allow 117 mm behind the panel; panel thickness must not exceed 6.0 mm.
  • Wire the rear terminals and keep input wiring apart from power cables.
  • Run the wizard configuration from the front or load a configuration from a memory stick or Blue Control software.
  • Set the clock for the datalogger and test profiles before running production.

Maintenance and service life

The DCP250 has a lithium battery that backs up the real time clock, so include it in your preventive maintenance plan. Clean the front panel with warm soapy water, dry it immediately and close the USB cover first. Back up the configuration and profiles to a memory stick for fast replacement.

Related products and ordering notes

Related Honeywell controllers available on request include the DCP50, UDC3500 and UDC2500. Send the full model code, including I/O modules and communication option, so Seven Star LLC can quote the correct configuration.

DCP250 questions in brief

Buyers often ask about loops, logging and communication. The DCP250 can run one or two loops, log data with a real time clock and communicate over Modbus RS485 or Ethernet. The answers below summarise the key facts.

Documents and quotation

The manufacturer datasheet for the DCP250 is available from Seven Star LLC with this listing when it is attached, and it should be read together with the installation manual before any engineering decision. To request a quotation, send an RFQ that states the part number DCP250, the quantity, the delivery location and, where relevant, the options you need. Seven Star LLC replies with availability and lead time; no price is published on this page.

Other Models in the DCP Range

Seven Star LLC supplies models from the DCP range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Honeywell DCP50 1/16 DIN Controller ProgrammerControllers & Data AcquisitionView details
Honeywell DCP250 1/4 DIN Controller Programmer, Graphic DisplayControllers & Data AcquisitionYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Honeywell DCP250 1/4 DIN Controller Programmer, Graphic Display Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Honeywell is the American industrial technology group whose products on this site cover gas and flame detection, pressure transmitters, flow measurement, gas metering, fire alarm systems and helicopter rotor balancing equipment. Its roots go back to a thermostat business in Minneapolis in 1885 and to Mark Honeywell's heating company, which merged with it in 1927. Several brands we list have joined Honeywell over the years: Gent fire systems of Leicester (part of Honeywell since 2005), Chadwick-Helmuth (a Honeywell business unit from 2002) and Elster gas metering (acquired around the end of 2015).

Seven Star LLC is an independent supplier in Muscat. We list Honeywell gas detectors and sensors, transmitters, Elster gas meters and flow computers, Gent fire alarm equipment and Chadwick-Helmuth balancers, and supply them and their spares in Oman and the GCC by part number.

Honeywell company profile

Origins 1885, Minneapolis (Butz thermostat business); merged with Mark Honeywell's company in 1927
Brands in our range Honeywell Analytics gas detection, SmartLine transmitters, Elster gas metering, Gent fire detection, Chadwick-Helmuth rotor track and balance
Gent Founded in Leicester, UK, around 1872 by John Thomas Gent; part of Honeywell since 2005
Elster Gas, water and electricity metering; bought by Honeywell from Melrose, deal completed around the end of 2015

Milestones

  • 1885: The Butz thermostat business starts in Minneapolis.
  • 1927: It merges with Mark Honeywell's company.
  • 2005: Gent fire detection (Leicester, UK) becomes part of Honeywell.
  • 2015: Honeywell completes the purchase of Elster from Melrose around the end of the year.

Honeywell products we list

Family Models Typical use
Fixed gas detectors Searchline Excel, Searchline Excel Plus, 02104-N-XSSA, Sensepoint XCD RTD, Sensepoint XCD IR, XCD H2, Sensepoint XCL, Sensepoint XRL, OmniPoint, RAEGuard 2 PID Flammable, toxic and VOC gas detection in process areas
Sensors, flame detection and control SR-W-MP75C LEL sensor, SR-X2V O2 sensor, FS24X Plus flame detector, R4343E flame switch, System 57 card, 5704FS panel Replacement sensors, fire detection and gas detection control panels
Transmitters and flow SmartLine STG700, STG800, STR82D remote seal, VersaFlow Coriolis Process pressure and mass flow measurement
Elster gas metering Q.Sonic plus, TRZ2, Quantometer, RABO, IRM-3 DUO, EK280, EC 350, enCore FC1, enCore ZM1, gas-net F1, gas-net D2, GasLab Q2, USM display Gas meters, volume correction and fiscal flow computing
Gent fire alarm systems Vigilon Plus, Vigilon Compact Plus, Nano, Xenex, S-Quad detector, S-Cubed, ALD302 base, S4-34420 interfaces, loop card, repeat panel, mimic panel, XENS-850 call point, 74430 bell Addressable and conventional fire alarm systems in buildings and plants
Chadwick-Helmuth rotor track and balance 8500C, 8500C Plus, Vibrex 2000, Model 11, photocell system, printer, bracket, protractor Helicopter rotor track and balance and propeller balancing

Gas detection uses two basic approaches. Point detectors such as the Sensepoint XCD measure the gas at one location, with a catalytic or infrared sensor for flammable gas and an electrochemical cell for toxic gas such as H2S. Open path detectors such as the Searchline Excel send an infrared beam across an area up to a few hundred metres long and detect a gas cloud anywhere along it. Infrared sensors cannot be poisoned the way catalytic beads can, which matters on sites with silicones or H2S.

Where Honeywell products are used

In Oman and the GCC, Honeywell gas detectors protect wellheads, gas plants, refineries and tank farms. Elster meters and flow computers measure gas at city gate stations and in industry. Gent systems are installed in commercial buildings, hospitals and hotels, and Chadwick-Helmuth balancers are used by helicopter operators.

Ordering Honeywell products: what we need

Send the part number from the label (for example 02104-N-XSSA or SPXCDASMTXF). For gas detectors, add the gas, range, output and certification. For gas meters, add size (DN), flow range and pressure rating. For Gent equipment, add the panel type and loop protocol.

Facts checked against Honeywell press releases and SEC filings, and published histories of Gent and Chadwick-Helmuth, October 2026.

FAQ

Questions about the Honeywell DCP250 1/4 DIN Controller Programmer,

Answers from our engineering team on installation, compatibility and integration.

01How many control loops does the DCP250 support?
The DCP250 supports one or two control loops and offers cascade, ratio and valve motor drive control.
02Does the DCP250 have a datalogger?
Yes. It has a datalogger with real time clock and 1 Mb of flash memory, and logged data can be extracted through the front USB port.
03What communication does the DCP250 use?
It supports Modbus RTU over RS485 and Modbus TCP over Ethernet, and the USB host is used for configuration and data files.
04What size is the DCP250?
It is a 1/4 DIN unit with a 96 x 96 mm bezel, 117 mm depth behind the panel and a weight of up to 0.65 kg.
05How can I request a quotation for the DCP250?
Send an RFQ with the full model code, quantity and delivery location. Seven Star LLC will reply with availability and lead time; this page shows no price.