- Automation & ControlView all 2,795 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: SICK
SICK WT34-V510 Photoelectric Proximity Sensor with Alarm Output
Description
The alarm-capable W34: SICK WT34-V510
Production managers like warnings before failures. The SICK WT34-V510 (part number 1019231) adds an alarm output to the DC version of the W34 proximity sensor family, delivered through a 5-pin M12 connector. It keeps the 27 x 92 x 70 mm ABS housing, the 2,500 mm infrared range and the selectable NPN or PNP behaviour of its sibling, so the extra pin is the main visible change.
What the alarm output does for you
The datasheet lists an alarm output among the features. In operation this is used to flag that the signal margin of the receiver is shrinking, which typically happens when the lens is soiled or the target reflects poorly. A controller can read the pin and schedule cleaning before the sensor starts to miss objects. That makes the V510 interesting for dusty sites such as cement, grain and mineral handling in the Gulf, where lens contamination is the number one cause of false readings.
- Alarm output with 5-pin M12 plug
- NPN or PNP selectable, light/dark selectable
- Test input: sender off, TE to 0 V
- MTTFD 793 years
WT34-V510 data overview
| Parameter | Value |
|---|---|
| Part number | 1019231 |
| Principle | Photoelectric proximity sensor |
| Sensing range | 100 mm to 2,500 mm, 90 percent remission |
| Light / spot | Infrared / 80 mm at 2,500 mm |
| Special output | Alarm output |
| Supply | 10 V DC to 30 V DC, 50 mA |
| Output | NPN or PNP selectable, up to 100 mA |
| Response time / frequency | Up to 500 microseconds / 1,000 Hz |
| Connection | Plug M12, 5-pin |
| Protection class | II |
| Dimensions (W x H x D) | 27 x 92 x 70 mm |
| Weight | 140 g |
| Housing / enclosure rating | ABS / IP67 |
| Temperature | Minus 40 to plus 60 C |
How WT34-V510 differs from other WT34 variants
Compared with the WT34-B410, the V510 swaps the 4-pin plug for a 5-pin plug and brings out the alarm signal. The MTTFD is almost identical, 793 years versus 790 years. Against the relay versions it is a fast transistor device. Pick the V510 only when your cabling and controller can use the fifth pin; otherwise the B410 is simpler.
Where it fits
Use it on conveyors with heavy dust loads, on outdoor gates where rain and dirt hit the lens, and on automated storage systems with multiple sensors, where a shared alarm line can summarise the health of many detection points. The large 80 mm spot suits pallets and bulk containers.
Selection and wiring
Make sure the cable has five conductors and that the controller input for the alarm is compatible with the chosen NPN or PNP polarity. Respect the 10 to 30 V DC supply window and the datasheet note about reference voltage. If the alarm is not needed, a four-wire cable still allows normal operation.
Start-up
Choose polarity, switching mode, align, adjust the potentiometer, then trigger the test input to confirm that the receiver output follows. Note the alarm behaviour on a clean lens as a baseline for later comparison.
To benefit from the alarm in practice, log its state in the PLC and trend how often it becomes active; a rising count is an early warning that cleaning intervals are too long. If the alarm appears right after commissioning, check alignment and background reflection first, because a mispointed sensor can give the same symptom as a dirty lens. Keep the setting positions documented for the maintenance team.
Support
Wipe the lens regularly and keep the plug tight. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
The 5-pin M12 plug brings a practical advantage in installations with standard five-core cables, because all conductors are used and a common cordset can serve several sensor types. Keep in mind that the WT34-V510 has an ABS housing in protection class II, 140 g weight and IP67, so a protective cover is advisable where forklifts or falling parts are a risk. Its response time of up to 500 microseconds and 1,000 Hz switching frequency leave room for fast conveyors; confirm the minimum object length against line speed, because very short objects at high speed may need a lower sensitivity setting and a clear background. Output current is up to 100 mA, matching PLC inputs and small relays.
When ordering, state the complete type code WT34-V510 and the part number 1019231, because the W34 family has many near-identical codes that differ only in connector, output or range. A note on the controller type and the polarity you intend to use helps us confirm that the sensor will suit your panel before dispatch to Oman or any GCC destination. Add a matching five-wire M12 cordset to the same request if you do not yet have one, so the installation team can finish the work in a single visit.
Questions buyers ask about WT34-V510
What extra does SICK WT34-V510 offer? An alarm output and a 5-pin M12 connector, in addition to the selectable NPN/PNP, light/dark outputs of the other DC W34 types.
What is the sensing range of WT34-V510? 100 mm to 2,500 mm on a 90 percent remission object using infrared light, with an 80 mm spot at 2,500 mm.
What are the electrical values of WT34-V510? 10 to 30 V DC, 50 mA consumption, output current up to 100 mA, response up to 500 microseconds and 1,000 Hz.
How long is the MTTFD of WT34-V510? 793 years with DCavg of 0 percent, per the datasheet.
Does WT34-V510 have a test input? Yes, a sender-off test input, activated by connecting TE to 0 V.
Documents and quotation
The manufacturer datasheet for WT34-V510 comes with this page. Send an RFQ with the part number WT34-V510, quantity and your delivery point in Oman or the GCC, and we will confirm availability and lead time.
Other Models in the Sick Wt34 Range
Seven Star LLC supplies models from the Sick Wt34 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| SICK WT34-R220S07 Relay Photoelectric Sensor with Black Mask | Inductive Proximity Sensors | View details |
| SICK WT34-V510 Photoelectric Proximity Sensor with Alarm Output | Inductive Proximity Sensors | You are viewing this model |
Datasheets & Documents
- Datasheet SICK WT34-V510 Photoelectric Proximity Sensor with Alarm Output Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
SICK is the German maker of industrial sensors: photoelectric and proximity sensors, safety laser scanners and light curtains, encoders, distance sensors, code readers and gas analysers. Erwin Sick, an optics engineer, founded it in Munich in 1946, and in 1952 it introduced its first marketable accident-prevention light curtain, which protected press operators by stopping the machine when a hand broke the light beam. The company moved to Waldkirch in the Black Forest in 1956 and is still headquartered there. It is a privately held company, and has been an Aktiengesellschaft (AG) since 1996.
SICK company profile
| Founded | 1946, Munich, Germany, by Erwin Sick (1909–1988) |
|---|---|
| Headquarters | Waldkirch, Baden-Württemberg, Germany (since 1956) |
| Ownership | Privately held; after the founder's death in 1988 his widow Gisela Sick became the main shareholder. Legal form SICK AG since 1996 |
| Size | More than 12,000 employees and group revenue of about EUR 2.3 billion (company figures for 2023) |
| First breakthrough | Accident-prevention light curtain for presses, shown in Hanover in 1952 |
| International growth | First foreign subsidiary in France in 1972, United States in 1976; today sales and service companies worldwide |
| Product families | Photoelectric, inductive, capacitive, magnetic and ultrasonic sensors; safety laser scanners, light curtains, safety controllers and relays; encoders and motor feedback systems; distance sensors and LiDAR; barcode and 2D code readers and machine vision; gas analysers, dust and flow measurement for process and emissions monitoring |
Milestones
- 1946: Erwin Sick receives a licence to run his engineering firm in Munich.
- 1952: The first marketable accident-prevention light curtain is presented in Hanover and goes into series production.
- 1956: The company moves to Waldkirch with 25 employees.
- 1972 and 1976: Subsidiaries are founded in France and the United States.
- 1996: SICK becomes an Aktiengesellschaft.
- Today: Sensors for factory and logistics automation, machine safety and process analysis, with a large share of revenue outside Germany.
Choosing a SICK sensor
For object detection, the sensing principle comes first. A retro-reflective sensor (WL series) sends light to a reflector and switches when an object breaks the beam; it is reliable over long distances and easy to align. A sensor with background suppression (WTB series) detects an object at a set distance and ignores what is behind it, which suits conveyors with shiny or dark backgrounds. A through-beam pair (WS/WE) gives the longest range and the highest reliability in dust. For transparent bottles and film, use a model built for transparent objects (for example WL12G-3B or WL150-P420). The digits in the code also matter: "P" usually means a PNP output and "N" NPN, and the last digits set the connector or cable. For machine guarding, a safety laser scanner such as nanoScan3 or microScan3 protects an area, while a safety controller such as Flexi Soft combines several safety devices.
Where SICK products are used
In Oman and the GCC, SICK sensors are used in packaging and bottling lines, food and beverage plants, logistics and airport baggage handling, cement and steel plants, ports and cranes, automated warehouses, and on machines built by European OEMs. SICK safety scanners guard robots and automated guided vehicles, and its encoders give position feedback on motors, hoists and conveyors.
SICK products we list
| Family | Examples |
|---|---|
| Photoelectric sensors | WL12-3P2431, WTB12-3P2431, GTB6-P4211, VL18-4P3240, WL12G-3B2531, WS/WE100, KT5W contrast, W26 IO-Link |
| Proximity, cylinder and ultrasonic sensors | IME12-08NPSZC0S, IME18-05BPSZC0S, MZT8, UM18 4-20 mA, UM30, UFN3 fork |
| Machine safety | nanoScan3, microScan3, S300 Professional, Flexi Soft FX3-CPU1, FX3-XTIO, ReLy OSSD |
| Encoders and motor feedback | DFS60B, AFM60 PROFINET, AFS60 SSI, ATM60 PROFIBUS, SRS50, EFS50 |
| Distance sensors and code readers | DT50, DL50, DT35, Lector632 |
Ordering SICK products: what we need
Send the type code and the 7-digit SICK part number from the label (for example WTB12-3P2431 together with its part number). For a replacement sensor, add the output (PNP or NPN), connection (M8, M12 or cable) and sensing distance. For encoders, add the interface (incremental, SSI, PROFIBUS, PROFINET), resolution and shaft type. For safety scanners, tell us the model and whether the existing configuration needs to be kept.
Frequently requested SICK models: SICK RT-P3231 ZoneControl Background Suppression Sensor.
Facts checked against SICK's published company history and annual figures, October 2026.
Browse SICK products by category: Sensors & Transmitters.
FAQ
Questions about the SICK WT34-V510 Photoelectric Proximity Sensor with
Answers from our engineering team on installation, compatibility and integration.
01What extra does SICK WT34-V510 offer?
An alarm output and a 5-pin M12 connector, in addition to the selectable NPN/PNP, light/dark outputs of the other DC W34 types.
02What is the sensing range of WT34-V510?
100 mm to 2,500 mm on a 90 percent remission object using infrared light, with an 80 mm spot at 2,500 mm.
03What are the electrical values of WT34-V510?
10 to 30 V DC, 50 mA consumption, output current up to 100 mA, response up to 500 microseconds and 1,000 Hz.
04How long is the MTTFD of WT34-V510?
793 years with DCavg of 0 percent, per the datasheet.
05Does WT34-V510 have a test input?
Yes, a sender-off test input, activated by connecting TE to 0 V.


















Reviews
There are no reviews yet.