- Automation & ControlView all 2,767 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Swagelok
Swagelok SS-45S8 40 Series 1/2 in. Tube Ball Valve, 12 Cv
Description
What SS-45S8 is
Swagelok SS-45S8 is the larger-bore member of the one-piece 40 series: a two-way, straight, on-off ball valve in 316 stainless steel with 1/2 in. tube fitting connections at both ends, a black lever handle and a 0.406 in. (10.3 mm) orifice. Its stated maximum Cv is 12, the highest flow coefficient in the one-piece instrumentation range, and its room-temperature rating is 2500 psig (172 bar).
The 44 and 45 sizes are the part of the older 40 series that has not been replaced by 40G designs; the catalog says they remain available in stainless steel. In other words, SS-45S8 is the correct string when a plant needs the high-flow 1/2 in. one-piece valve rather than the compact 40G.
Seat and packing construction
Instead of the modified PTFE single piece used in 40G valves, the 40 series uses a capsule seat packing made of PTFE. The catalog stresses that it needs no system pressure to seal, has virtually no dead space, allows bidirectional flow and is easy to clean and purge. A one-piece ball stem keeps stem and orifice aligned, and a top-loaded design allows adjustment with the valve inline. The ring and disc on this part are PTFE-coated stainless steel, and the packing is PTFE.
Operators should note that the larger 0.406 in. bore of SS-45S8 makes it a good fit for viscous or particle-bearing instrument fluids, where a small-bore valve would restrict flow or plug. At the same time, the higher Cv means a quick shutoff can create a pressure surge in liquid lines, so closing the lever smoothly is good practice.
Within the catalog, the stainless 44 and 45 sizes accept tube ends from 3/8 to 3/4 in., so a plant can keep one valve family across several line sizes and swap only the end connection letter and number in the string.
Specifiers comparing quotes should therefore match the full string SS-45S8 exactly, since neighbouring numbers such as SS-44S6 or SS-45S12 describe different tube sizes of the same family.
Parameter table for SS-45S8
| Part number | SS-45S8 |
|---|---|
| Series | 40 series (45 size) |
| Flow pattern | 2-way shutoff, straight |
| Body material | 316 stainless steel |
| Ball and stem | Stainless steel |
| Ends | 1/2 in. Swagelok tube fitting both sides |
| Maximum Cv | 12 |
| Orifice | 0.406 in. (10.3 mm) |
| Rating | 2500 psig at 100 F (172 bar at 37 C) |
| Packing | PTFE |
| Ring/disc | PTFE-coated stainless steel |
| Service class | General |
| Handle | Black lever |
| Cleaning | SC-10 |
| Testing | According to WS-22 |
| Low emissions | Certified |
Comparing SS-45S8 with SS-43GS8 and the 60 series
For a 1/2 in. tube the choice is usually between three valves. SS-43GS8 is the 40G with a Cv of 1.1 and an oval handle; SS-45S8 is the 40 series with 12 Cv; SS-63TS8 is the 60 series three-piece with 7.5 Cv and a 2200 psig rating. If the line must carry flow with little pressure drop and the 2500 psig band is enough, SS-45S8 gives the best Cv per envelope. If you need repair-in-line three-piece construction, look at the 60 series instead.
Use cases
Large-bore instrument headers, vent and drain lines on skids, sample take-offs for liquid hydrocarbon, hydraulic test manifolds and utility-air headers all use 1/2 in. valves in this class. In Omani gas plants a fast quarter-turn shutoff on a 1/2 in. impulse or purge line is common, and the PTFE seat suits many clean process fluids. Check chemical compatibility of PTFE and the fluorinated components with your medium before selecting.
Installing the valve
Mount with the flow path accessible for wrench clearance; the packing bolt of 45 size valves takes a 5/8 in. open-ended wrench. Hold the body flats when making the tube fitting connection so the valve does not twist. After the first heat cycle, check for packing weep, because the catalog warns that 40 series packing must be readjusted for service at pressures higher than the factory test pressure of 1000 psig (69 bar) or lower rated pressure.
Maintenance
Exercise the valve occasionally. The catalog notes that valves not cycled for a long period may need higher initial torque. Packing adjustment may be required periodically to increase service life. Keep spare SS-45S8 units for critical vent lines since the one-piece design is replaced as an assembly.
Ordering SS-45S8
Provide the exact string SS-45S8, the quantity and the final destination. Tell us if you need actuation, locking handles or special cleaning because these appear as additional options in the manufacturer catalog.
Quick answers about SS-45S8
What makes SS-45S8 different from the 40G valves? It belongs to the earlier 40 series, still offered in stainless steel in the 44 and 45 sizes, with PTFE capsule seat packing and a larger 0.406 in. orifice.
What is the flow coefficient of the Swagelok SS-45S8? The maximum Cv listed is 12 with a 0.406 in. (10.3 mm) orifice, much higher than the 1.1 Cv of the 1/2 in. 40G valve SS-43GS8.
What pressure rating applies to SS-45S8? The product data shows 2500 psig at 100 degrees F (172 bar at 37 degrees C) with a general service class and testing according to WS-22.
What tool adjusts the packing bolt on a 45 series valve? The catalog states that 45 series valves require a 5/8 in. open-ended wrench to adjust the packing bolt.
Are the seats of SS-45S8 pressure-energised? No, the catalog describes the capsule seat packing as PTFE that does not require system pressure to make a seal and allows bidirectional flow.
Documents and quotation
The datasheet file is the manufacturer catalog covering 40G and 40 series one-piece instrumentation ball valves. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send the RFQ with SS-45S8, the quantity and delivery site and we will return availability.
Datasheets & Documents
- Datasheet Swagelok SS-45S8 40 Series 1/2 in. Tube Ball Valve, 12 Cv Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Swagelok is the American maker of tube fittings and small-bore valves, best known for its two-ferrule compression tube fitting. Fred A. Lennon and Cullen B. Crawford founded it in Cleveland, Ohio, in July 1947 as Crawford Fitting Company to make that fitting. Lennon bought the whole business and the patent in 1948, and the company has been based in Solon, Ohio, since the mid-1960s.
Seven Star LLC is an independent supplier in Muscat. We list Swagelok tube fittings, needle, ball, check, relief and metering valves, filters, regulators and sample cylinders, and supply them for instrument tubing and analyser systems in Oman and the GCC by exact part number.
Swagelok company profile
| Established | July 1947, Cleveland, Ohio, as Crawford Fitting Company |
|---|---|
| Founders | Fred A. Lennon and Cullen B. Crawford; Lennon bought out Crawford in 1948 |
| Headquarters | Solon, Ohio, since the mid-1960s |
| Product families | Tube fittings and adapters, face seal fittings, needle, ball, plug, check, relief and diaphragm valves, filters, regulators, quick-connects, sample cylinders and hoses |
Milestones
- 1947: Fred A. Lennon and Cullen B. Crawford found Crawford Fitting Company in Cleveland in July.
- 1948: Lennon buys out Crawford.
- Mid-1960s: Headquarters move to Solon, Ohio.
Swagelok products we list
| Family | Models | Typical use |
|---|---|---|
| Tube fittings | Overview, SS-810-6 union, SS-810-3 tee, SS-810-9 elbow, SS-810-4 cross, SS-810-1-8 male connector, SS-810-7-8 female connector, SS-810-61 bulkhead, SS-12M0-6 metric union, VCR face seal | Leak-tight connections on instrument and process tubing |
| Needle and metering valves | SS-1RS4, SS-1RF4, SS-18RF6, SS-6NBS6, SS-20VS4, SS-4MG | Isolation and fine flow adjustment on instrument lines and sample systems |
| Ball and plug valves | 40G, 40GX 3-way, 60 Series, 83 Series, P4T plug | Quick quarter-turn shut-off and switching |
| Check, relief and sealed valves | SS-4C-1, CH, R3A, RL3, SS-4BK bellows, SS-DLS4 diaphragm | Backflow prevention, overpressure relief and leak-free sealing for toxic or high-purity media |
| Filters, regulators, sampling | SS-4F-2, SS-4TF-7, KPR regulator, sample cylinders, QC quick-connects | Analyser sample conditioning and gas or liquid sampling |
A Swagelok part number can be read directly. In SS-810-6, "SS" is 316 stainless steel, "810" means a 1/2 in. tube fitting (8 sixteenths of an inch, 10 series), and "-6" is a union. A suffix such as "-8" adds a 1/2 in. NPT end, and "M0" marks metric tube, as in SS-12M0-6 for 12 mm. Tube fittings must be made up the same way every time: finger-tight, then 1 1/4 turns for most sizes. A gap inspection gauge confirms the fitting has been pulled up.
Where Swagelok products are used
In Oman and the GCC, Swagelok fittings and valves are used on instrument impulse lines, analyser sample systems, hydraulic and pneumatic control tubing, chemical injection and gas sampling in oil and gas, refining, petrochemical, power and laboratory installations.
Ordering Swagelok products: what we need
Send the full Swagelok part number (for example SS-810-6 or SS-1RS4), the material, and the tube size in inches or millimetres. For valves, add the end connections and any options. For sample cylinders, add the volume, pressure rating and end configuration.
Facts checked against Swagelok company history, October 2026.
Browse Swagelok products by category: Pipes & Fittings, Regulators, Fittings & Valves.
FAQ
Questions about the Swagelok SS-45S8 40 Series 1/2 in. Tube Ball Valve,
Answers from our engineering team on installation, compatibility and integration.
01What makes SS-45S8 different from the 40G valves?
It belongs to the earlier 40 series, still offered in stainless steel in the 44 and 45 sizes, with PTFE capsule seat packing and a larger 0.406 in. orifice.
02What is the flow coefficient of the Swagelok SS-45S8?
The maximum Cv listed is 12 with a 0.406 in. (10.3 mm) orifice, much higher than the 1.1 Cv of the 1/2 in. 40G valve SS-43GS8.
03What pressure rating applies to SS-45S8?
The product data shows 2500 psig at 100 degrees F (172 bar at 37 degrees C) with a general service class and testing according to WS-22.
04What tool adjusts the packing bolt on a 45 series valve?
The catalog states that 45 series valves require a 5/8 in. open-ended wrench to adjust the packing bolt.
05Are the seats of SS-45S8 pressure-energised?
No, the catalog describes the capsule seat packing as PTFE that does not require system pressure to make a seal and allows bidirectional flow.


















Reviews
There are no reviews yet.