Brand:

SICK IME30-38NNSZC0S M30 Inductive Sensor, 38 mm Triple Range

Description

SICK IME30-38NNSZC0S, the long-reach M30

Large gaps are sometimes unavoidable: heavy gates swing, guide rails flex and structural steel moves with temperature. The SICK IME30-38NNSZC0S (part number 1071311) is an M30 x 1.5 inductive sensor designed for such conditions, with a nominal sensing range of 38 mm and a safe sensing range of 30.78 mm. The special feature listed in the datasheet is triple sensing range, and the output is NPN normally open on an M12 4-pin plug.

Seven Star LLC includes this exact code for plants in Oman that must match a long-range M30 sensor on heavy machinery.

Behaviour of a 38 mm inductive sensor

The price of range is speed and settling time. The datasheet gives 100 Hz switching frequency, a time delay before availability of up to 200 ms and a warm-up time of 90 s, after which the switching point stabilises. Hysteresis is 1 to 15 percent, reproducibility is up to 5 percent and temperature drift is plus or minus 10 percent. These values reflect a large sensing coil and make the sensor best suited to slow or static detection.

  • Sn 38 mm, Sa 30.78 mm, non-flush
  • Housing 71 mm long, thread length 41 mm, up to 70 Nm torque
  • Reduction factors: stainless about 0.77, aluminium about 0.44, copper about 0.37, brass about 0.46
  • MTTFD 1,735 years, enclosure rating IP67

IME30-38NNSZC0S technical values

Parameter Value
Part number 1071311
Thread / design M30 x 1.5, standard design
Special feature Triple sensing range
Sn / Sa 38 mm / 30.78 mm
Installation Non-flush
Supply 10 V DC to 30 V DC
Output NPN, normally open, DC 3-wire
Continuous current Up to 200 mA
Switching frequency 100 Hz
Time delay / warm-up Up to 200 ms / 90 s
Connection Male connector M12, 4-pin
Housing / sensing face Brass nickel-plated / PA 66
Enclosure rating IP67
Operating temperature Minus 25 to plus 75 C

How IME30-38NNSZC0S differs from other IME30 variants

The IME30-15BNSZC0K, the other M30 in this lane, is a flush-mountable short-body sensor with 15 mm range, 500 Hz and a 52 mm length. The IME30-38NNSZC0S is non-flush with 38 mm, only 100 Hz and a 71 mm body. Both are NPN normally open with M12 plugs, so the selection is a pure trade-off between reach and speed, and between free mounting space and gap tolerance.

Feature IME30-38NNSZC0S IME30-15BNSZC0K
Sn 38 mm 15 mm
Installation Non-flush Flush
Frequency 100 Hz 500 Hz
Length 71 mm 52 mm
Torque 70 Nm 100 Nm

Applications in Gulf industry

Detecting a gate or door of a bulk container, the position of a heavy slide in a steel plant, a crane trolley end position, or a pallet carrier on a roller conveyor are classic uses. Long reach lets a sensor sit well away from the moving part, which protects it from collisions and hot swarf.

Selection and mounting

Provide free space around the sensing face as required for non-flush types, and avoid steel brackets behind the head. Use both brass nuts, tighten to no more than 70 Nm, and make the target a steel plate larger than the sensing face. For aluminium targets, work with roughly 44 percent of the distance.

Commissioning

After powering up, wait for the 90 s warm-up before final adjustment, then verify the switching point with the real target and with temperature extremes if possible.

Maintenance

Check sensor face, cable plug and bracket for damage and dirt. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

It helps to note the datasheet figure for shock and vibration: 30 g for 11 ms and a sweep from 10 to 55 Hz at 1 mm amplitude. This covers ordinary conveyor and machine duty but not the extreme shocks of crushers or hammering equipment, where a heavier-duty mounting or a different sensing concept should be considered. The device is also protected against short circuits and power-up pulses, and its EMC behaviour follows EN 60947-5-2. When ordering, quote IME30-38NNSZC0S and part number 1071311 together, and tell us whether you need the M12 cordset and a mounting bracket in the same shipment to Oman or other GCC destinations.

Consider the warm-up behaviour when planning start-up sequences. A sensor with a 90 s warm-up time should not be used to release a machine immediately after power-on; let the PLC ignore the input for a short period, or accept that the switching point may drift slightly while the electronics reach their operating temperature. In cold outdoor starts, with ambient temperatures near the minus 25 degree limit, allow extra settling time. Within normal conditions the IME30-38NNSZC0S then holds its switching point within the plus or minus 10 percent temperature drift given in the datasheet, and the mounting gap can be chosen with that margin in mind.

Questions buyers ask about IME30-38NNSZC0S

What range does SICK IME30-38NNSZC0S offer? Nominal Sn is 38 mm and the safe sensing range Sa is 30.78 mm from an M30 x 1.5 non-flush housing with triple sensing range.

How quick is IME30-38NNSZC0S? The switching frequency is 100 Hz, with a time delay before availability of up to 200 ms and a warm-up time of 90 s.

What output does IME30-38NNSZC0S have? NPN normally open on a DC 3-wire circuit via a 4-pin M12 male connector; continuous current up to 200 mA.

What are the mechanical limits of IME30-38NNSZC0S? The standard-design brass body is 71 mm long with a 41 mm thread; maximum tightening torque is 70 Nm.

How do other metals affect IME30-38NNSZC0S? Relative to steel St37 at 1, stainless is about 0.77, aluminium about 0.44, copper about 0.37 and brass about 0.46.

Documents and quotation

The manufacturer datasheet for IME30-38NNSZC0S is attached to this listing. Send an RFQ with the part number IME30-38NNSZC0S, quantity and delivery point in Oman or the GCC for availability and lead time.

Datasheets & Documents
  • PDF Datasheet SICK IME30-38NNSZC0S M30 Inductive Sensor, 38 mm Triple Range Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

SICK is the German maker of industrial sensors: photoelectric and proximity sensors, safety laser scanners and light curtains, encoders, distance sensors, code readers and gas analysers. Erwin Sick, an optics engineer, founded it in Munich in 1946, and in 1952 it introduced its first marketable accident-prevention light curtain, which protected press operators by stopping the machine when a hand broke the light beam. The company moved to Waldkirch in the Black Forest in 1956 and is still headquartered there. It is a privately held company, and has been an Aktiengesellschaft (AG) since 1996.

SICK company profile

Founded 1946, Munich, Germany, by Erwin Sick (1909–1988)
Headquarters Waldkirch, Baden-Württemberg, Germany (since 1956)
Ownership Privately held; after the founder's death in 1988 his widow Gisela Sick became the main shareholder. Legal form SICK AG since 1996
Size More than 12,000 employees and group revenue of about EUR 2.3 billion (company figures for 2023)
First breakthrough Accident-prevention light curtain for presses, shown in Hanover in 1952
International growth First foreign subsidiary in France in 1972, United States in 1976; today sales and service companies worldwide
Product families Photoelectric, inductive, capacitive, magnetic and ultrasonic sensors; safety laser scanners, light curtains, safety controllers and relays; encoders and motor feedback systems; distance sensors and LiDAR; barcode and 2D code readers and machine vision; gas analysers, dust and flow measurement for process and emissions monitoring

Milestones

  • 1946: Erwin Sick receives a licence to run his engineering firm in Munich.
  • 1952: The first marketable accident-prevention light curtain is presented in Hanover and goes into series production.
  • 1956: The company moves to Waldkirch with 25 employees.
  • 1972 and 1976: Subsidiaries are founded in France and the United States.
  • 1996: SICK becomes an Aktiengesellschaft.
  • Today: Sensors for factory and logistics automation, machine safety and process analysis, with a large share of revenue outside Germany.

Choosing a SICK sensor

For object detection, the sensing principle comes first. A retro-reflective sensor (WL series) sends light to a reflector and switches when an object breaks the beam; it is reliable over long distances and easy to align. A sensor with background suppression (WTB series) detects an object at a set distance and ignores what is behind it, which suits conveyors with shiny or dark backgrounds. A through-beam pair (WS/WE) gives the longest range and the highest reliability in dust. For transparent bottles and film, use a model built for transparent objects (for example WL12G-3B or WL150-P420). The digits in the code also matter: "P" usually means a PNP output and "N" NPN, and the last digits set the connector or cable. For machine guarding, a safety laser scanner such as nanoScan3 or microScan3 protects an area, while a safety controller such as Flexi Soft combines several safety devices.

Where SICK products are used

In Oman and the GCC, SICK sensors are used in packaging and bottling lines, food and beverage plants, logistics and airport baggage handling, cement and steel plants, ports and cranes, automated warehouses, and on machines built by European OEMs. SICK safety scanners guard robots and automated guided vehicles, and its encoders give position feedback on motors, hoists and conveyors.

SICK products we list

Family Examples
Photoelectric sensors WL12-3P2431, WTB12-3P2431, GTB6-P4211, VL18-4P3240, WL12G-3B2531, WS/WE100, KT5W contrast, W26 IO-Link
Proximity, cylinder and ultrasonic sensors IME12-08NPSZC0S, IME18-05BPSZC0S, MZT8, UM18 4-20 mA, UM30, UFN3 fork
Machine safety nanoScan3, microScan3, S300 Professional, Flexi Soft FX3-CPU1, FX3-XTIO, ReLy OSSD
Encoders and motor feedback DFS60B, AFM60 PROFINET, AFS60 SSI, ATM60 PROFIBUS, SRS50, EFS50
Distance sensors and code readers DT50, DL50, DT35, Lector632

Ordering SICK products: what we need

Send the type code and the 7-digit SICK part number from the label (for example WTB12-3P2431 together with its part number). For a replacement sensor, add the output (PNP or NPN), connection (M8, M12 or cable) and sensing distance. For encoders, add the interface (incremental, SSI, PROFIBUS, PROFINET), resolution and shaft type. For safety scanners, tell us the model and whether the existing configuration needs to be kept.

Frequently requested SICK models: SICK RT-P3231 ZoneControl Background Suppression Sensor.

Facts checked against SICK's published company history and annual figures, October 2026.

FAQ

Questions about the SICK IME30-38NNSZC0S M30 Inductive Sensor, 38 mm

Answers from our engineering team on installation, compatibility and integration.

01What range does SICK IME30-38NNSZC0S offer?
Nominal Sn is 38 mm and the safe sensing range Sa is 30.78 mm from an M30 x 1.5 non-flush housing with triple sensing range.
02How quick is IME30-38NNSZC0S?
The switching frequency is 100 Hz, with a time delay before availability of up to 200 ms and a warm-up time of 90 s.
03What output does IME30-38NNSZC0S have?
NPN normally open on a DC 3-wire circuit via a 4-pin M12 male connector; continuous current up to 200 mA.
04What are the mechanical limits of IME30-38NNSZC0S?
The standard-design brass body is 71 mm long with a 41 mm thread; maximum tightening torque is 70 Nm.
05How do other metals affect IME30-38NNSZC0S?
Relative to steel St37 at 1, stainless is about 0.77, aluminium about 0.44, copper about 0.37 and brass about 0.46.