Brand:

Honeywell UDC1700 1/8 DIN Universal Digital Controller

Description

Honeywell UDC1700 1/8 DIN universal digital controller overview

The Honeywell UDC1700 is a 1/8 DIN universal digital controller in the Micro-Pro series, with a 96 x 48 mm front. It offers the same control functions as the 1/16 DIN UDC1200 in a larger housing, so the display is easier to read and there is more room for wiring. The manufacturer states that it is downward compatible with existing UDC1000 and UDC1500 applications.

A feature that distinguishes the UDC1700 is the remote setpoint model, often called the R model. It has a second input that accepts a linear or potentiometer signal as a remote setpoint, so the controller can act as a slave to a master device such as a PLC or a setpoint programmer. That model also includes a digital input to switch between local and remote setpoint and fuzzy autotune software that limits overshoot.

This page summarises the manufacturer documentation for the Honeywell UDC1700 for buyers in Oman and the GCC. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Key features of the UDC1700

The following features come from the manufacturer specification for the UDC1200 and UDC1700 series.

  • Universal input accepting a wide range of thermocouple types, RTD and linear current or voltage signals, configured from the menu.
  • Typical accuracy of 0.1 percent of span plus or minus one least significant digit, with four samples per second and a configurable filter from 0.5 to 100 seconds.
  • Up to three outputs of relay, SSR driver or DC linear type, with the control output and alarms assignable among them.
  • Remote setpoint model with a second input for 0-5 V, 1-5 V, 0-10 V, 2-10 V, 0-20 mA, 4-20 mA, 0-50 mV, 10-50 mV, 0-100 mV or 0-2000 ohm signals.
  • Pre-tune and self-tune, setpoint ramp from 1 to 9999 engineering units per hour, and a dual setpoint option selected by a digital input.
  • Two soft alarms and a loop alarm, with alarm inhibit on power-up and setpoint switching.
  • Optional RS485 communication with ASCII or Modbus RTU, up to 32 units on one link.
  • Universal 90 to 264 V ac supply with a 24/48 V ac/dc option.

UDC1700 technical specifications

The table gives the main data for the UDC1700 from the combined UDC1200 and UDC1700 sheet.

Parameter Value
Model UDC1700
Format 1/8 DIN horizontal, 96 x 48 mm front
Panel cutout 45 mm x 92 mm
Case depth 100 mm
Weight 250 g maximum
Accuracy 0.1 percent of span plus or minus 1 LSD
Sampling rate Four samples per second
Input isolation 2500 V from outputs (except SSR) and supply
Input types Thermocouples R, S, J, T, K, L, B, C, N; Pt100 RTD; DC linear mV, mA and V
Remote setpoint input R model: linear or potentiometer, field configurable
Outputs Up to three: relay SPDT 2 A, SSR driver or DC linear
Alarms Two soft alarms plus loop alarm
Communication RS485 ASCII or Modbus RTU, up to 19200 baud
Power supply 90 to 264 V ac, 50/60 Hz; 24/48 V ac/dc optional
Power consumption 4 W
Operating temperature 0 to 55 degC
Approvals UL recognized; CE design

Typical applications in Oman and the GCC

The UDC1700 suits panels that have a 1/8 DIN cutout and applications that need a larger, easier-to-read display. Typical uses in Oman and the GCC include the following.

  • Oil and gas: slave controllers that take a setpoint from a PLC for heater and exchanger temperature loops on skids.
  • Utilities and power: boiler auxiliaries, oil heating and cooling loops and temperature control of switchgear room equipment.
  • Water and wastewater: process heating and pressure or level loops on packaged treatment units.
  • Manufacturing: furnaces, ovens, plastics, packaging and food and beverage lines.

Selection and compatibility notes for the UDC1700

Select the UDC1700 over the UDC1200 when a 1/8 DIN panel opening is available and operators benefit from the bigger display. Select the remote setpoint model when another device supplies the setpoint, for example a PLC analog output or a setpoint programmer.

The UDC1700 is the controller companion of the UDI1700 indicator, which has the same front size, so a mixed panel of controllers and indicators looks uniform. Choose output types for each of the three positions, and decide on the digital input, RS485 and low-voltage supply options at the time of ordering.

Installation and commissioning of the UDC1700

Install the UDC1700 with the pre-assembled mounting fixture supplied.

  • Cut the panel opening to 45 mm x 92 mm and allow 100 mm depth behind the panel.
  • Wire all inputs and outputs to the rear screw terminals; keep thermocouple and RTD cables away from power wiring.
  • For the remote setpoint model, set the input type of the second input and scale it to the controller range.
  • Configure the loop, run pre-tune, then enable self-tune.

Maintenance and service life

Routine care of the UDC1700 is limited to keeping the front clean, checking terminal tightness and verifying calibration at your usual interval. Configuration is held in non-volatile memory, so a power outage does not erase it.

Related products and ordering notes

Related Honeywell controllers available on request include the UDC1200 and the UDI1700 indicator. Provide the full model code so Seven Star LLC can quote the correct version, including whether the remote setpoint model is required.

UDC1700 questions in brief

Buyers ask most often about the remote setpoint model and the panel size. The UDC1700 is a 1/8 DIN controller with universal input, up to three outputs and optional RS485. The answers below summarise the main points.

Documents and quotation

The manufacturer datasheet for the UDC1700 is available from Seven Star LLC with this listing when it is attached, and it should be read together with the installation manual before any engineering decision. To request a quotation, send an RFQ that states the part number UDC1700, the quantity, the delivery location and, where relevant, the options you need. Seven Star LLC replies with availability and lead time; no price is published on this page.

Other Models in the UDC Range

Seven Star LLC supplies models from the UDC range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Honeywell UDC2500 1/4 DIN Universal Digital ControllerControllers & Data AcquisitionView details
Honeywell UDC3200 1/4 DIN Controller with Math FunctionsControllers & Data AcquisitionView details
Honeywell UDC3500 1/4 DIN Dual-Loop Digital ControllerControllers & Data AcquisitionView details
Honeywell UDC1200 1/16 DIN Universal Digital ControllerControllers & Data AcquisitionView details
Honeywell UDC1700 1/8 DIN Universal Digital ControllerControllers & Data AcquisitionYou are viewing this model
Honeywell UDC700 1/32 DIN Controller and IndicatorControllers & Data AcquisitionView details
Datasheets & Documents
  • PDF Datasheet Honeywell UDC1700 1/8 DIN Universal Digital Controller Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Honeywell is the American industrial technology group whose products on this site cover gas and flame detection, pressure transmitters, flow measurement, gas metering, fire alarm systems and helicopter rotor balancing equipment. Its roots go back to a thermostat business in Minneapolis in 1885 and to Mark Honeywell's heating company, which merged with it in 1927. Several brands we list have joined Honeywell over the years: Gent fire systems of Leicester (part of Honeywell since 2005), Chadwick-Helmuth (a Honeywell business unit from 2002) and Elster gas metering (acquired around the end of 2015).

Seven Star LLC is an independent supplier in Muscat. We list Honeywell gas detectors and sensors, transmitters, Elster gas meters and flow computers, Gent fire alarm equipment and Chadwick-Helmuth balancers, and supply them and their spares in Oman and the GCC by part number.

Honeywell company profile

Origins 1885, Minneapolis (Butz thermostat business); merged with Mark Honeywell's company in 1927
Brands in our range Honeywell Analytics gas detection, SmartLine transmitters, Elster gas metering, Gent fire detection, Chadwick-Helmuth rotor track and balance
Gent Founded in Leicester, UK, around 1872 by John Thomas Gent; part of Honeywell since 2005
Elster Gas, water and electricity metering; bought by Honeywell from Melrose, deal completed around the end of 2015

Milestones

  • 1885: The Butz thermostat business starts in Minneapolis.
  • 1927: It merges with Mark Honeywell's company.
  • 2005: Gent fire detection (Leicester, UK) becomes part of Honeywell.
  • 2015: Honeywell completes the purchase of Elster from Melrose around the end of the year.

Honeywell products we list

Family Models Typical use
Fixed gas detectors Searchline Excel, Searchline Excel Plus, 02104-N-XSSA, Sensepoint XCD RTD, Sensepoint XCD IR, XCD H2, Sensepoint XCL, Sensepoint XRL, OmniPoint, RAEGuard 2 PID Flammable, toxic and VOC gas detection in process areas
Sensors, flame detection and control SR-W-MP75C LEL sensor, SR-X2V O2 sensor, FS24X Plus flame detector, R4343E flame switch, System 57 card, 5704FS panel Replacement sensors, fire detection and gas detection control panels
Transmitters and flow SmartLine STG700, STG800, STR82D remote seal, VersaFlow Coriolis Process pressure and mass flow measurement
Elster gas metering Q.Sonic plus, TRZ2, Quantometer, RABO, IRM-3 DUO, EK280, EC 350, enCore FC1, enCore ZM1, gas-net F1, gas-net D2, GasLab Q2, USM display Gas meters, volume correction and fiscal flow computing
Gent fire alarm systems Vigilon Plus, Vigilon Compact Plus, Nano, Xenex, S-Quad detector, S-Cubed, ALD302 base, S4-34420 interfaces, loop card, repeat panel, mimic panel, XENS-850 call point, 74430 bell Addressable and conventional fire alarm systems in buildings and plants
Chadwick-Helmuth rotor track and balance 8500C, 8500C Plus, Vibrex 2000, Model 11, photocell system, printer, bracket, protractor Helicopter rotor track and balance and propeller balancing

Gas detection uses two basic approaches. Point detectors such as the Sensepoint XCD measure the gas at one location, with a catalytic or infrared sensor for flammable gas and an electrochemical cell for toxic gas such as H2S. Open path detectors such as the Searchline Excel send an infrared beam across an area up to a few hundred metres long and detect a gas cloud anywhere along it. Infrared sensors cannot be poisoned the way catalytic beads can, which matters on sites with silicones or H2S.

Where Honeywell products are used

In Oman and the GCC, Honeywell gas detectors protect wellheads, gas plants, refineries and tank farms. Elster meters and flow computers measure gas at city gate stations and in industry. Gent systems are installed in commercial buildings, hospitals and hotels, and Chadwick-Helmuth balancers are used by helicopter operators.

Ordering Honeywell products: what we need

Send the part number from the label (for example 02104-N-XSSA or SPXCDASMTXF). For gas detectors, add the gas, range, output and certification. For gas meters, add size (DN), flow range and pressure rating. For Gent equipment, add the panel type and loop protocol.

Facts checked against Honeywell press releases and SEC filings, and published histories of Gent and Chadwick-Helmuth, October 2026.

FAQ

Questions about the Honeywell UDC1700 1/8 DIN Universal Digital

Answers from our engineering team on installation, compatibility and integration.

01What size is the UDC1700?
It is a 1/8 DIN horizontal controller with a 96 x 48 mm front, a panel cutout of 45 mm x 92 mm and a case depth of 100 mm.
02What is the UDC1700 R model?
The R model has a second input for a remote setpoint, accepting linear or potentiometer signals, plus a digital input to switch between local and remote setpoint.
03Which inputs does the UDC1700 accept?
It accepts thermocouple types R, S, J, T, K, L, B, C and N, Pt100 RTD and DC linear signals, selected from the menu.
04What communication is available on the UDC1700?
An optional RS485 interface supports ASCII or Modbus RTU at up to 19200 baud for up to 32 units on one link.
05How can I request a quotation for the UDC1700?
Send an RFQ with the full model code, quantity and delivery location. Seven Star LLC will reply with availability and lead time; this page shows no price.