- Automation & ControlView all 1,608 products
- AC Drives
- Industrial Communications
- PLC & I/O Cards
- Vibration Monitoring
- Automation Accessories
- Controllers & Data Acquisition
- CCTV & Security
- Safety Switches & Guard Locking
- Encoders
- Industrial Computers
- Servo Drives
- Motor Soft Starters
- HMI Displays
- Pneumatic Cylinders
- Isolator & Barrier
- Automation Software
- Machine Vision
- Robotics
Brand: Allen-Bradley
Allen-Bradley 800H-BR6D1 Red Extended Push Button 30.5 mm
Description
A red extended-head push button for 30.5 mm panel holes
The Allen-Bradley 800H-BR6D1 is a red, non-illuminated, momentary push button with an extended head, for a 30.5 mm hole and Type 4/4X/13 enclosures. Its contact block is a single N.O. (800T-XD1), so it makes a circuit when pressed, which is the usual arrangement for a stop-and-start station’s start or a reset button.
The 800H family is the corrosion-resistant 30 mm range: the 800-TD009 technical data lists Type 1/4/4X/12/13 protection for 800H operators, against Type 1/4/12/13 for 800T, so the 4X rating is the reason to pick 800H on washdown or coastal equipment.
Technical specifications
| Parameter | Specification |
|---|---|
| Catalog number | 800H-BR6D1 |
| Device type | 30 mm momentary push button, non-illuminated |
| Cap color / type | Red, extended head, round plastic |
| Hole diameter | 30.5 mm |
| Contact block | 1 N.O., standard (800T-XD1) |
| Operator mechanical life | 10,000,000 cycles minimum (momentary, extended head) |
| Enclosure compatibility | NEMA Type 1, 4, 4X, 12, 13 (Bulletin 800H); IP66/65 |
| Contact block thermal current | 10 A |
| Contact utilization category | A600 / AC-15 (AC); Q600 / DC-13 (DC) |
| Maximum operational voltage | 600V AC / 600V DC |
| Electrical design life | 1,000,000 cycles at maximum load |
| Terminal wire range | #18 to #14 AWG (14 to 18 AWG x2 per product page) |
| Terminal torque | 6 to 8 lb-in (0.7 to 0.9 N-m) |
| Operating temperature (non-illuminated) | -40 to +55 C (-40 to +131 F) |
| Storage temperature | -40 to +85 C |
| Vibration / shock | 10 G maximum; 25 G contact fragility, no damage at 100 G |
Reading the catalog number
In the 800-TD009 catalog number explanation, 800H is the plastic Type 4/4X/13 range, BR is the extended-head operator, 6 is the red cap color and D1 is the contact block, one N.O. (800T-XD1). The same operator with an N.C. block uses D2, and the other cap colors are numbered 1 green, 2 black, 5 white, 7 blue and 9 yellow.
The extended button stands proud of the bezel, which makes it easy to find with a gloved hand but also easier to press accidentally. Where accidental operation is a concern, a flush head or a guarded operator is the better choice.
Contact ratings
Standard contact blocks carry 10 A AC thermal current (2.5 A DC), with a 24V, 24 mA minimum. At 120 to 600V AC the contact makes 7200 VA and breaks 720 VA (A600), and on DC 600 it breaks 69 VA at 28 to 600V (Q600). That suits relay coils and PLC inputs but not low-level signals; below 17V or 5 mA, the datasheet recommends PenTUFF or Logic Reed contact blocks.
Terminal screws are tightened to 6 to 8 lb-in, with wire of #18 to #14 AWG. The data sheet gives operating forces for a push button without a contact block of 2 lb maximum and 1 lb for a standard contact block, so the total push force is low.
Related Allen-Bradley products: Allen-Bradley 800T-D6A 40 mm Red Mushroom Push Button, Allen-Bradley 800T-FXP16RA1 Illuminated Push-Pull Button, Allen-Bradley 800T-A2A 30 mm Flush Push Button, Allen-Bradley 5069-RTB64-SCREW Power Terminal Kit, Allen-Bradley 2085-ECR Micro800 Bus Terminator Module and Allen-Bradley 5069-RTB18-SCREW 18-Pin Screw Terminal Block.
Ordering and documents
Order 800H-BR6D1 exactly as printed. The hosted document is the 800-TD009L 30 mm push button technical data, and the photo is the official Rockwell product photograph, showing the operator with its mounting hardware. More control-panel devices are listed in the Automation Accessories category.
Seven Star LLC is an independent supplier in Muscat and quotes on request. Please confirm the catalog number, ratings and the current product status against the latest Rockwell Automation documents before ordering.
Datasheets & Documents
- Datasheet 30 mm Push Button Specifications, Bulletins 800T and 800H (800-TD009L-EN-P, September 2025) Download
Reviews (0)
About brand
Allen-Bradley is the brand of Rockwell Automation for industrial control: ControlLogix and CompactLogix controllers, I/O systems, PanelView operator terminals, PowerFlex drives, motor control and industrial network equipment. The company began in Milwaukee in 1903, when Lynde Bradley and Dr. Stanton Allen formed the Compression Rheostat Company to make the motor speed controller Bradley had invented in 1901. It took the name Allen-Bradley in 1909 and was bought by Rockwell International in 1985. Since 2001 its owner has been Rockwell Automation, which is still headquartered in Milwaukee, Wisconsin.
Allen-Bradley company profile
| Founded | 1903, Milwaukee, Wisconsin, USA, as the Compression Rheostat Company |
|---|---|
| Founders | Lynde Bradley (inventor of the compression rheostat, 1901) and Dr. Stanton Allen (investor); Harry Bradley joined in 1904 |
| Name | Allen-Bradley Company from 1909 |
| Ownership | Acquired by Rockwell International in 1985 for about USD 1.65 billion; a brand of Rockwell Automation (NYSE: ROK) since 2001 |
| Headquarters | Milwaukee, Wisconsin, USA |
| Product families | Logix programmable automation controllers (ControlLogix, CompactLogix), legacy SLC 500 and MicroLogix PLCs, Micro800 controllers, POINT, FLEX and Compact I/O, PanelView HMIs, PowerFlex AC drives, contactors, motor starters and soft starters, safety components, Stratix Ethernet switches |
Milestones
- 1901: Lynde Bradley invents the compression rheostat to control the speed of electric motors.
- 1903: The Compression Rheostat Company is formed in Milwaukee with an initial investment of USD 1,000.
- 1904: Harry Bradley joins; a crane controller is shown at the St. Louis World's Fair.
- 1909: The company is renamed Allen-Bradley.
- 1985: Rockwell International acquires Allen-Bradley.
- 2001: Rockwell Automation becomes the company's name; the Allen-Bradley brand marks 100 years in 2003.
Reading Allen-Bradley catalogue numbers
The first digits of an Allen-Bradley catalogue number identify the platform, which tells you what is compatible with what. 1756 is ControlLogix (chassis-based, used for large process and plant control), 1769 is CompactLogix 5370 with Compact I/O, 5069 is CompactLogix 5380 with Compact 5000 I/O, 1734 is POINT I/O, 1794 and 5094 are FLEX and FLEX 5000 distributed I/O, 1746 and 1747 belong to the older SLC 500 family, 1766 is MicroLogix 1400 and 2080 is Micro800. For drives, 25B is PowerFlex 525 and 22B is PowerFlex 40; in a code such as 25B-D010N114, "D" means 380–480 V, "010" is the output current rating, and N114 instead of N104 means the drive has an integrated EMC filter. Many plants in the region still run SLC 500 and older MicroLogix systems, which Rockwell has discontinued, so exact spares and migration to CompactLogix are both common requests.
Where Allen-Bradley products are used
In Oman and the GCC, Allen-Bradley controllers and drives run on oil and gas facilities, water treatment and pumping stations, cement, food and beverage and packaging plants, and on machines supplied by American OEMs. ControlLogix is often the platform for plant control systems, while PowerFlex drives are used on pumps, fans and conveyors.
Allen-Bradley products we list
| Family | Examples |
|---|---|
| ControlLogix | 1756-L85E, 1756-EN2T, 1756-EN2TR, 1756-IF16, 1756-IB32, 1756-PA75, 1756-A10 |
| CompactLogix and Micro controllers | 5069-L320ER, 5069-L340ERM, 1769-L33ER, 1769-L16ER, MicroLogix 1400, Micro820, SLC 500 (1746) |
| Distributed I/O | 1734-AENTR, 1734-IB8, 1734-IE2C, 1734-IB8S safety, 1794-AENTR, 5094-AENTR, 5069-IF8 |
| Operator terminals | PanelView Plus 7 10-inch, PanelView Plus 7 15-inch, PanelView 800, PanelView 5310 |
| Drives, motor control and networking | PowerFlex 525, PowerFlex 755, PowerFlex 4, 150-A180NBD SMC, Stratix 2000, 1783-NATR |
Ordering Allen-Bradley products: what we need
Send the full catalogue number and the series letter from the label (for example 1756-EN2T Series D), because firmware and compatibility can change between series. For drives, add the motor power, voltage and filter option. For a discontinued SLC 500 or MicroLogix part, tell us whether you need the exact spare or a migration proposal.
Facts checked against Rockwell Automation's published company history, October 2026.
Browse Allen-Bradley products by category: PLC & I/O Cards, AC Drives.
Related products
Frequently Asked Questions
What is 800H-BR6D1?
A red extended-head 30 mm non-illuminated push button with one N.O. contact.
What hole size does it need?
30.5 mm.
What enclosure types does 800H suit?
Type 1, 4, 4X, 12 and 13 per 800-TD009.
How many mechanical cycles?
10,000,000 minimum for momentary extended-head push buttons.
What contact rating applies?
A600 / Q600 with 10 A thermal current for standard contacts.
Reviews
There are no reviews yet.