- Automation & ControlView all 2,855 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Banner Engineering
Banner K50 Pro Beacon IO-Link Multicolor RGB Indicator
Description
Overview
The Banner K50 Pro Beacon with IO-Link is a 50 mm multicolour RGB indicator that shows machine and process status in any colour the control system chooses. Instead of wiring one input per colour, the light is driven by an IO-Link master, which gives access to full colour selection, flashing, dimming and animated patterns over a single standard M12 cable. The indicator emits light around its entire perimeter and is bright enough for high ambient light, including outdoor installations.
Seven Star LLC supplies the Banner K50 Pro Beacon to machine builders, packaging plants, warehouses and utility sites in Oman and the GCC. Our engineers in Muscat help customers integrate the beacon with their IO-Link masters and PLCs, and we provide engineering support for projects across Muscat, Sohar, Duqm and Salalah.
Operating Principle
IO-Link is a point-to-point link between a master and a device. The Banner K50 Pro Beacon receives cyclic process data from the IO-Link master, and its parameters are written acyclically, so the PLC only has to change a few bytes to switch colour, intensity or animation. Process data out defines Colour 1 and Colour 2, their intensities, the flash rate, the animation mode and the rotation direction. Thirteen predefined colours are available, from green, red and yellow to sky blue, violet, magenta and white, plus five custom colours defined by the user.
Animation modes include steady, flash at a 50/50 duty cycle, two-colour flash, strobe at an 80/20 duty cycle, half/half, half/half rotate, chase and a demo mode that cycles through the colour spectrum. Flash rates of 0.5, 1.5, 3, 6, 9 and 12 Hz are predefined, and custom rates and intensities can be added. Because one Banner K50 can show many states, a single beacon can replace a multi-segment tower light on a compact machine and still signal running, warning, fault and maintenance conditions clearly.
Engineering Design of the Banner K50
The Banner K50 Pro Beacon has a polycarbonate base, dome and mounting nut and installs in a standard 30 mm hole with its M30 × 1.5 threaded base, tightened to a maximum of 4.5 N·m. The housing measures 50 mm in diameter and the light is emitted 360° from the sides, so the status is visible from every direction on the factory floor. Two connection versions exist: K50PBLKQ with an integral 4-pin M12 male connector, and K50PBLKQP with a 150 mm PVC-jacketed pigtail ending in an M12 connector.
The indicator runs from 24 V DC ±25% and draws about 115 mA typical at 24 V DC. Its supply circuitry is protected against reverse polarity and transient voltages, and the input response time is 30 ms maximum. The build is rated IP67 and IP69K per ISO 20653 and meets UL Type 4X and Type 13 when mounted in a matching enclosure, while vibration and shock performance follow IEC 60068-2-6 and IEC 60068-2-27.
Key Features
The Banner K50 Pro Beacon offers the following benefits to control engineers:
- IO-Link control of colour, intensity, flash rate and animation through a single M12 connection.
- Thirteen predefined colours and five user-defined custom colours, giving practically unlimited colour options.
- Animated patterns such as chase, half/half rotate, strobe and two-colour flash to separate similar machine states.
- Bright, uniform, daylight-visible output that is viewable around the entire perimeter of the dome.
- Compact 50 mm diameter with a 30 mm threaded base that fits standard panel and enclosure cut-outs.
- Rugged polycarbonate construction rated IP67, IP69K and UL Type 4X for washdown and outdoor use.
- Wide operating range from -40 to +50 °C, suited to air-conditioned panels and hot outdoor skids alike.
- IODD file available from Banner for straightforward integration with common IO-Link masters.
Industrial Applications
Machine builders mount the Banner K50 directly on guarding, conveyors and control enclosures to show operating status, call for operators or confirm a completed cycle. On packaging and bottling lines the beacon highlights jams and low-material warnings, and in warehouses it is used for call-for-parts and pick confirmation stations. Because the colour and pattern are software defined, the same part number can be stocked for many machines and configured differently in each PLC program.
In Oman the beacon is useful on water pumping stations, compressor packages and loading bays where operators need clear status from a distance in strong daylight. Seven Star LLC supplies the Banner K50 Pro Beacon as a trusted supplier together with the control hardware around it, such as the Cooper Crouse-Hinds EFSC215 explosionproof pushbutton control station, the Schneider Electric Harmony XALK control station enclosure and the Siemens SINAMICS G120C compact drive.
Technical Specifications
The Banner K50 Pro Beacon data below come from the Banner datasheet p/n 219895.
| Parameter | Specification |
|---|---|
| Model | Banner K50PBLKQ (integral M12) and K50PBLKQP (150 mm PVC pigtail with M12) |
| Input | IO-Link |
| Supply voltage and current | 24 V DC ±25%; 115 mA typical at 24 V DC; 150 mA maximum at 18 V DC |
| Input response time | 30 ms maximum while active |
| Colours | 13 predefined colours plus 5 custom colours |
| Animation modes | Steady, flash, two-colour flash, strobe, half/half, half/half rotate, chase, demo |
| Flash rates | 0.5, 1.5, 3, 6, 9 and 12 Hz, plus custom rate |
| Typical lumen output | White 20.9 lm, yellow 17.2 lm, green 15.3 lm, red 6.8 lm (at 25 °C) |
| Mounting | M30 × 1.5 threaded base, 4.5 N·m maximum torque, nut included |
| Construction | Polycarbonate base, dome and nut; 50 mm diameter |
| Environmental rating | IP67, IP69K per ISO 20653; UL Type 4X and Type 13 when mounted in a matching enclosure |
| Operating temperature | -40 to +50 °C, 90% RH maximum at +50 °C non-condensing |
| Storage temperature | -40 to +70 °C |
How to Order
To order the Banner K50 Pro Beacon, send Seven Star LLC an RFQ with the quantity and connection version, together with details of your IO-Link master. Our team in Muscat will confirm availability and lead time, recommend matching M12 cordsets, and provide the Banner datasheet for download. Seven Star LLC supplies Banner Engineering indication products on request across Oman and the GCC with engineering support in Muscat.
Datasheets & Documents
- Datasheet Banner K50 Pro Beacon with IO-Link Datasheet (p/n 219895) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Banner Engineering is the American maker of industrial sensors, indicator lights, wireless monitoring and machine safety products. Bob Fayfield founded it in 1966 as a small engineering firm in the Minneapolis area. The company is privately held and still based in Minnesota.
Seven Star LLC lists Banner devices including the Q4X rugged stainless steel laser distance sensor and the K50 Pro Beacon IO-Link multicolor RGB indicator, and supplies Banner sensors and indicators to plants and machine builders in Oman.
Banner Engineering company profile
| Founded | 1966, Minneapolis, Minnesota, USA |
|---|---|
| Founder | Bob Fayfield |
| Headquarters | Minneapolis area, Minnesota, USA |
| Ownership | Privately held |
| Product families | Photoelectric, laser, ultrasonic and radar sensors, Q4X and Q5X measurement sensors, QM30VT vibration and temperature sensors, K50 and TL50 indicator lights, safety light curtains and switches, Sure Cross wireless and IO-Link devices |
Banner Q4X and K50 Pro
Banner offers the Q4X in four range versions, all starting at 25 mm: Q4X100 to 100 mm, Q4X300 to 300 mm, Q4X500 to 500 mm and Q4X600 to 600 mm. The series is available with discrete, analog and IO-Link outputs and has a display on the sensor. The K50 Pro Beacon is a status indicator whose color and behavior are set from the controller over IO-Link.
Banner Engineering products we list
Ordering Banner products: what we need
Send the complete Banner model number from the device label, because range, output type and connector are all coded into it. For the Q4X, state the measuring distance, the output your PLC input needs and the connector or cable style. For indicators, give the housing size, control method and voltage. Mating cordsets and brackets can be included for GCC orders.
Facts checked against Banner Engineering's published company profile, October 2026.
FAQ
Questions about the Banner K50 Pro Beacon IO-Link Multicolor RGB
Answers from our engineering team on installation, compatibility and integration.
01What does the Banner K50 Pro Beacon need to operate?
The beacon needs a 24 V DC supply and an IO-Link master port. Colour, intensity, flash rate and animation are written as IO-Link process data, and Banner publishes an IODD file for configuring the master.
02Can one Banner K50 replace a multi-colour tower light?
In many compact machines it can. One beacon shows 13 predefined and 5 custom colours with steady, flashing and animated patterns, so running, warning, fault and service states can all be signalled from a single 50 mm indicator.
03Is the Banner K50 suitable for outdoor and washdown use?
The polycarbonate housing is rated IP67 and IP69K per ISO 20653 and meets UL Type 4X when mounted in a matching enclosure. It operates from -40 to +50 °C and is designed to be visible in high ambient light, including outdoors.
04How is the Banner K50 Pro Beacon mounted?
It mounts in a standard 30 mm hole with its M30 × 1.5 threaded base and supplied nut, tightened to a maximum of 4.5 N·m. The K50PBLKQ has an integral M12 connector and the K50PBLKQP has a short PVC pigtail with an M12 connector.
05Can Seven Star LLC supply Banner K50 beacons for Oman projects?
Seven Star LLC supplies Banner K50 Pro Beacons and matching cordsets to customers in Oman and the GCC, with engineering support from Muscat.


















Reviews
There are no reviews yet.