- Automation & ControlView all 2,760 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Endress+Hauser (E & H)
Endress+Hauser Promass F300 Coriolis Mass Flowmeter
Description
Overview
The Endress+Hauser Promass F300 is a premium-accuracy Coriolis mass flowmeter built for process industries where measurement integrity directly affects product quality, custody transfer accounting, and regulatory compliance. It simultaneously measures mass flow, volume flow, density, concentration, and temperature from a single sensor, a hallmark of the Endress+Hauser Promass F300 design, removing the need for separate instruments at the same measuring point and reducing both installation cost and potential leak paths.
With engineering support in Muscat, Seven Star LLC supplies the Promass F300 to process plants, refineries, and manufacturing facilities across the Sultanate of Oman and the wider GCC, with manufacturer documentation and local technical support.
Measurement Principle
The Endress+Hauser Promass F300 operates on the Coriolis effect: process fluid is split and directed through a pair of curved measuring tubes that are driven into oscillation at their natural frequency. As mass flows through the vibrating tubes, the Coriolis force induces a measurable phase shift between the inlet and outlet legs of each tube that is directly proportional to mass flow rate, while the resonant frequency of oscillation shifts in proportion to fluid density.
Because the measurement is derived from the fundamental physics of moving mass rather than inferred or volumetric relationship, it is inherently immune to changes in pressure, temperature, viscosity, or fluid conductivity. There are no moving parts to wear, no obstruction to create pressure drop, and no dependency on upstream or downstream straight-run piping, which keeps installation compact and measurement uncertainty low even in demanding process conditions.
Engineering Design of the Endress+Hauser Promass F300
The sensor houses a symmetrical dual-tube measuring system in stainless steel 1.4539 (904L), 1.4404, or corrosion-resistant Alloy C22 (2.4602 / UNS N06022), selected to match the process medium and covering nominal diameters from DN 8 to DN 250 (3/8 inch to 10 inch). The rugged sensor housing is rated for the harshest ambient conditions typically found on process plants and offshore platforms in the Gulf region.
The transmitter is a compact, easily accessible unit that can be mounted directly on the sensor or remotely on a wall or panel, with a backlit local display for on-site diagnostics and configuration. Communication options include HART, PROFIBUS, Modbus, EtherNet/IP, and Ethernet-APL, and every unit ships with Heartbeat Technology for continuous self-verification and predictive diagnostics without process interruption.
Key Features
The Endress+Hauser Promass F300 combines premium accuracy with engineering robustness in a single compact package:
- Delivers mass flow measurement error as low as ±0.05% with the PremiumCal calibration option, among the tightest tolerances available in Coriolis metering.
- Measures up to seven process variables simultaneously – mass flow, volume flow, corrected volume flow, density, reference density, concentration, and temperature.
- Requires no inlet or outlet straight-run piping, saving space in tightly packed skid and pipe-rack installations.
- Handles medium temperatures from –196°C to 350°C, suiting both cryogenic and high-temperature process duties.
- Includes Heartbeat Technology for continuous device self-verification traceable to national standards.
- Available in measuring tube materials rated for corrosive and hygienic service, including 904L stainless steel and Alloy C22.
- Supports HART, PROFIBUS, Modbus, EtherNet/IP, and Ethernet-APL for direct integration into modern process control systems.
- Immune to fluctuating pressure, temperature, and viscosity, maintaining accuracy through upset and transient process conditions.
Industrial Applications
The Endress+Hauser Promass F300 is specified wherever mass-based accounting and product quality depend on precise flow data: custody transfer skids, chemical dosing and blending lines, refinery and petrochemical units, cryogenic LNG handling, and food, beverage, and pharmaceutical production where hygienic accuracy and traceability are non-negotiable. The Endress+Hauser Promass F300’s multivariable output also makes it a natural fit for concentration monitoring in liquid analytics and density-critical batching processes.
With manufacturer documentation, Seven Star LLC supplies the Promass F300 to industrial and process facilities throughout Oman and the GCC, including projects in the Sohar and Salalah economic zones, district cooling and desalination plants, and the oil and gas sector’s upstream and downstream operations, with technical support and lead time confirmed at quotation.
Technical Specifications
Key technical parameters for the Endress+Hauser Promass F300 are summarized below; these figures define the Endress+Hauser Promass F300 across its full DN 8 to DN 250 range.
| Parameter | Specification |
|---|---|
| Model | Endress+Hauser Proline Promass F300 (8F3B) |
| Measuring Principle | Coriolis |
| Nominal Diameter | DN 8 to DN 250 (3/8″ to 10″) |
| Mass Flow Accuracy | ±0.10% standard, ±0.05% with PremiumCal |
| Density Accuracy | ±0.0005 g/cm³ |
| Medium Temperature | –196°C to 350°C |
| Measuring Tube Materials | Stainless steel 1.4539 (904L), 1.4404, Alloy C22 (2.4602 / UNS N06022) |
| Measured Variables | Mass flow, volume flow, corrected volume flow, density, reference density, concentration, temperature |
| Communication | HART, PROFIBUS, Modbus, EtherNet/IP, Ethernet-APL |
| Diagnostics | Heartbeat Technology self-verification |
Approvals, Functional Safety, and Hazardous-Area Certification
The Endress+Hauser Promass F300 carries an unusually broad certification portfolio for a single device family, with explosion-protection approvals under ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, and UK Ex, which allows a single instrument standard to be applied across multinational project scopes without re-engineering the hazardous-area design for each jurisdiction. Functional safety is addressed through compliance with IEC 61508, making the device applicable in safety instrumented functions designed to IEC 61511 – relevant for overfill protection, burner management fuel metering, and emergency shutdown interlocks common in Omani refining and gas processing facilities.
For commercial measurement, the flowmeter is available with custody transfer approvals including MI-005 and MI-002 under the European Measuring Instruments Directive, PTB certification, and NTEP for North American loading applications, with factory calibration carried out to ISO/IEC 17025. Hygienic variants are certified to 3-A and EHEDG and are supplied in line with cGMP expectations, covering dairy, beverage, and pharmaceutical duties. Process pressure ratings extend to PN 100, Class 600, and 63K, and the sensor housing is supplied in 1.4301 (304) as standard or 1.4404 (316/316L) as an option, with the transmitter housing available in coated AlSi10Mg, cast 1.4409 (CF3M), or stainless steel for aggressive plant atmospheres.
Transmitter Interface, Outputs, and Commissioning
The transmitter of the Endress+Hauser Promass F300 presents a four-line backlit display with touch control that can be operated through the closed cover, so a technician does not have to open the enclosure – and therefore does not have to obtain a hot-work or gas-test permit – simply to read a totaliser or acknowledge a diagnostic message. An optional WLAN interface allows the same menu structure to be reached from a laptop, tablet, or phone through a standard web browser, which is a practical benefit when the meter is installed at height on a pipe rack or inside a congested skid. A remote display version is available where the sensor location is genuinely inaccessible.
The device provides up to three configurable outputs, selectable between 4–20 mA HART, WirelessHART, passive 4–20 mA, pulse/frequency/switch, double pulse for phase-shifted counting, and relay, together with status and 4–20 mA inputs for bringing in an external pressure or temperature signal for live compensation. Supply options cover 24 V DC and 100 to 230 V AC, and the enclosure is rated IP66/67 Type 4X with IP69 available for high-pressure washdown areas. Ambient operation is specified from −40°C to +60°C as standard, with a −50°C low-temperature option; the upper limit should be respected when siting the transmitter in direct Gulf sunlight, and Seven Star LLC routinely recommends a sunshade or the remote-mount version for unshaded outdoor installations in Oman.
Ordering Notes for the Endress+Hauser Promass F300
In specifications, purchase requests and search tools the Endress+Hauser Promass F300 is also written as “Promass F 300”. These notations all refer to this same product, so any of them can be used in an enquiry; the full order code on the nameplate is still the safest reference.
Buyers often look for the datasheet and the manual of the Promass F300. The document attached to this page as a PDF in the Documents section is the official Endress+Hauser Promass F300 Coriolis Mass Flowmeter Manual, and any value that is not covered in it is confirmed at quotation.
Request a Quote for Endress+Hauser Promass F300 Coriolis Mass Flowmeter
For plants standardizing on the Endress+Hauser Promass F300, Seven Star LLC is ready to support your project with a formal RFQ, technical datasheet, and delivery timeline for the Endress+Hauser Promass F300. Our instrumentation engineers provide technical support with selection across Oman and the GCC, with lead time confirmed at quotation. Working closely with plant engineers in the region, contact our instrumentation division today to configure the right Promass F300 variant for your process, complete with genuine calibration certificates and full documentation.
Related Products
- ABB-Coriolis mass flowmeter CoriolisMaster FCH430 and FCH450
- GF Signet 8550-1 Flow Transmitter
- Promass 83F / 84F Coriolis Mass Flowmeter
- ABB-Armored variable area purgemeter FAM3200
- ABB-Electromagnetic flowmeter ProcessMaster FEP300
- Elster Q.Sonic plus Ultrasonic Gas Flow Meter
Specifying a Promass F 300 with order code 8F3B
For the 8F3B Promass F 300, specify the lowest and highest fluid temperatures as well as the normal operating temperature. These values determine which measuring-tube and process-connection configuration to quote. Include the required calibration and transmitter outputs with the extended order code.
Datasheets & Documents
- Instruction Manual Endress+Hauser Promass F300 Coriolis Mass Flowmeter Manual Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Endress+Hauser makes process measurement instruments for flow, level, pressure, temperature and liquid analysis. Georg H. Endress and Ludwig Hauser started the business in Lörrach, Germany, on 1 February 1953, first selling level meters, and the Endress+Hauser name has been used since 1957. The group is headquartered in Reinach, Switzerland, and has been wholly owned by the Endress family since 1975.
Seven Star LLC is an independent supplier listing Endress+Hauser flowmeters, level and pressure transmitters, temperature assemblies and liquid analysis products for buyers in Oman and the GCC. Instruments are matched from the full order code on the nameplate.
Endress+Hauser company profile
| Origin | Founded in Lörrach, Germany, on 1 February 1953 by the Swiss engineer Georg H. Endress and Ludwig Hauser |
|---|---|
| Headquarters | Endress+Hauser AG, Reinach (Basel-Landschaft), Switzerland |
| Ownership | Family owned; the Endress family has been the sole shareholder since 1975, and a family charter commits the company to stay family owned |
| Size | About 16,500 employees and sales of about EUR 3.7 billion (2023, as reported by the company) |
| Product families | Proline flowmeters, Micropilot and Levelflex radar, Liquiphant switches, Cerabar and Deltabar pressure, iTEMP and iTHERM temperature, Liquiline and Memosens liquid analysis |
Milestones
- 1953: Georg H. Endress and Ludwig Hauser start the business in Lörrach on 1 February, first selling level meters.
- 1957: The Endress+Hauser name comes into use.
- 1975: The Endress family becomes sole shareholder.
- 2023: About 16,500 employees and sales of about EUR 3.7 billion, as reported by the company.
Endress+Hauser product lines
| Line | Measuring principle | Typical use |
|---|---|---|
| Promass F 300, Promass 80F, 83F/84F | Coriolis mass flow | Direct mass flow and density of liquids and gases, hydrocarbon transfer and chemical dosing |
| Promag P 300, P 500, H 300, W 400, W 10, 50P | Electromagnetic flow | Water, wastewater, slurries and other conductive liquids |
| Prowirl F 200, 72F | Vortex flow | Steam, gas and low-viscosity liquids |
| Prosonic Flow 92F, t-mass 65F | Ultrasonic and thermal mass flow | Water lines; compressed air and industrial gases |
| Micropilot FMR62, FMR67, FMR60, FMR10B, FMR20, FMR50, FMR52 | Free-space radar level, 80 GHz and 26 GHz | Tanks, process vessels, silos and open water channels |
| Levelflex FMP51, FMP50, FMP54, FMP55 | Guided wave radar level | Level and interface in vessels, separators and bypass chambers |
| Liquiphant FTL51, Prosonic S FMU90 | Vibronic point level; ultrasonic level | High and low level alarms, pump protection, open channel flow |
| Cerabar PMC71B, PMP51B, PMP71, Deltabar PMD78B, PMD75 | Pressure and differential pressure | Process pressure, hydrostatic level and DP flow |
| iTEMP TMT82, TMT162, iTHERM TM101, TR66, TR10 | Temperature transmitters and thermometers | RTD and thermocouple points with thermowells |
| Liquiline CM444, CM442, Memosens CPS11E, Stamolys reagents | Liquid analysis | pH, ORP, conductivity, dissolved oxygen and nutrient analysis in water treatment and process |
Where Endress+Hauser instruments are used
In Oman and the GCC, Endress+Hauser instruments are common in oil and gas production and processing, refineries and petrochemicals, desalination and water networks, wastewater treatment, power plants and food and beverage plants. Coriolis meters measure hydrocarbon and chemical flows, electromagnetic meters cover water and wastewater, radar transmitters handle tank and silo level, and Liquiline analysers monitor water quality. Proline 300 and 500 flowmeters include Heartbeat Technology for in-situ verification, which reduces the need to remove a meter for checks.
Ordering Endress+Hauser instruments: what we need
The order code on the nameplate (for example PMP71-1QA1S11RDADU) defines every option: measuring range, process connection, materials, output, approvals and display. Send it with the serial number; Endress+Hauser can retrieve the original configuration from the serial number. For a new instrument add the medium, operating and design pressure and temperature, range, line size or tank geometry, process connection, wetted materials, output or protocol (4-20 mA HART, PROFIBUS, FOUNDATION Fieldbus, Modbus) and the hazardous-area approval required. Older models such as Promass 80/83 or Micropilot M are replaced by current Proline or 80 GHz Micropilot devices.
Facts checked against Endress+Hauser company history and product information, October 2026.
Browse Endress+Hauser products by category: Flowmeters, Level Transmitter, Pressure Instrumentation, Temperature, Liquid Analysis Sensors, Liquid Analytical Systems.
FAQ
Questions about the Endress+Hauser Promass F300 Coriolis Mass Flowmeter
Answers from our engineering team on installation, compatibility and integration.
01What makes the Endress+Hauser Promass F300 different from other Coriolis flowmeters?
The Promass F300 achieves measurement error as low as ±0.05% with the PremiumCal option and measures up to seven process variables from a single sensor, including mass flow, density, and temperature, reducing the number of instruments required at a measuring point.
02Does installing the Promass F300 require long straight pipe runs?
No. The Coriolis measuring principle does not depend on a developed flow profile, so the Promass F300 requires no inlet or outlet straight-run piping, which saves installation space and reduces both civil and piping costs on retrofit projects.
03What line sizes and materials does the Promass F300 support?
The Promass F300 is available from DN 8 to DN 250 (3/8 inch to 10 inch) with measuring tubes in stainless steel 1.4539 (904L), 1.4404, or corrosion-resistant Alloy C22, covering standard process duties through highly corrosive and cryogenic applications.
04Can the Promass F300 integrate with existing plant control systems?
Yes. The transmitter supports HART, PROFIBUS, Modbus, EtherNet/IP, and Ethernet-APL, allowing it to integrate directly with legacy 4-20mA/HART loops as well as modern digital automation architectures without additional gateways.
05Is Seven Star LLC an experienced supply partner for Endress+Hauser products?
Yes. Seven Star LLC supplies Endress+Hauser (E & H) products to customers in Oman and the GCC and can provide the manufacturer documentation and technical support on request.


















Reviews
There are no reviews yet.