Brand:

SICK WL18-3P630S04 Vibration-Resistant Retro-Reflective Sensor

Description

What sets SICK WL18-3P630S04 apart

The SICK WL18-3P630S04 (part number 1041928) takes the standard W18-3 photoelectric platform and adds three changes: a cubic connector with six pins, a test input to switch the sender off, and heightened vibration resistance. At 70 g it weighs more than the plain M12 version at 40 g, and its enclosure rating is IP65 rather than IP67. Suffix S04 identifies it in SICK’s catalogue as a variant with those extras.

Seven Star LLC lists the exact suffix because ordering the standard WL18-3P630 or P430 instead would give a different connector and different test function.

Test input and vibration resistance

The datasheet lists a test input sender off with the note TE to 0 V. In practice the PLC can switch the transmitter LED off for a short moment and verify that the receiver output changes; if the output does not change, the beam path is permanently bridged by dirt or the sensor is defective. Together with the heightened vibration resistance this makes the type attractive for presses, vibrating feeders and heavy conveyors where impact would loosen standard sensors.

  • Special feature: heightened vibration resistance
  • Test input: sender off, TE to 0 V
  • Connection: cubic connector, 6-pin
  • Enclosure rating IP65

WL18-3P630S04 technical values

Parameter Value
Part number 1041928
Dimensions (W x H x D) 17.6 x 75.5 x 33.5 mm
Sensing range 0 to 5 m (max. 0 to 7 m)
Spot / focus 40 mm at 2 m / 1.8 degrees
Adjustment Potentiometer
Supply 10 to 30 V DC, 40 mA
Switching output PNP, light or dark switching, up to 100 mA
Response time / frequency Under 500 microseconds / 1,000 Hz
Connection Cubic connector, 6-pin
Weight 70 g
Housing / optics ABS / PMMA
Enclosure rating IP65
Temperature Minus 40 to plus 60 C
MTTFD 1,759 years

How WL18-3P630S04 differs from other WL18-3 variants

Against the WL18-3P430 it swaps the M12 plug for a six-pin cubic connector, adds a test input and gains vibration resistance but loses two IP steps from IP67 to IP65. Against the WL18-3P130S06 it keeps a connector instead of a 2 m cable and offers the test function, while the P130S06 has the cable and lacks a test input. Choose the P630S04 when you have a signal-test routine or when a cubic socket is already in your harness.

Applications

Stamping and forming lines, vibrating conveyors in mining and cement plants, bulk handling in port terminals and gate monitoring on heavy machinery are the natural places for this type. The test input is useful on machines where a missed detection is costly, because the controller can check the sensor every cycle.

Selection and compatibility

You need a matching cubic socket with six poles. Make sure the PLC provides a digital output to pull the test pin to 0 V if you want to use the function; otherwise leave it unwired. Supply must be 10 to 30 V DC and the load must be PNP-compatible.

Installation

Mount with screws, using lock washers in vibrating positions, align the red spot onto a clean PL80A reflector, adjust the dial, then run the test function to verify the receiver reaction. Seal the cubic connector properly because the enclosure rating is IP65 only.

Maintenance and spares

Check the socket seal during routine inspections and clean the lens and reflector. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Because the test input is optional, the sensor works as a normal photo eye even if the pin is left open. When you do wire it, the controller should only pulse the input briefly outside the critical detection window, for example just before a pallet arrives, otherwise a real object could be missed while the sender is off. Log each test result; repeated failures typically indicate a dirty lens or a misaligned reflector long before the process actually fails. The MTTFD of 1,759 years and DCavg of 0 percent in the datasheet describe the sensor, not the test routine.

Spare-part planning deserves a word. A six-pin cubic connector version cannot be replaced by an M12 sensor without changing the socket and the wiring, so keep at least one WL18-3P630S04 in the site store for each critical machine. When requesting a quote please give the complete type code including the S04 suffix, the part number 1041928 and, if you also need them, the matching cubic socket and the PL80A reflector with its bracket, so that the delivery contains everything needed to restart the line after a failure.

Questions buyers ask about WL18-3P630S04

What is special about SICK WL18-3P630S04? It has a 6-pin cubic connector, a test input for sender off and heightened vibration resistance, in a 70 g W18-3 body.

What is the test input on WL18-3P630S04? A sender-off input that deactivates the LED when pulled to 0 V (TE to 0 V), letting a controller check that the receiver reacts correctly.

Which enclosure rating does WL18-3P630S04 have? IP65, lower than the IP67 of the M12 plug version, because of the cubic connector.

What range does WL18-3P630S04 offer? 0 to 5 m typical and 0 to 7 m maximum with PL80A, spot 40 mm at 2 m, focus 1.8 degrees.

What are the main electrical values of WL18-3P630S04? 10 to 30 V DC, 40 mA, PNP output with light or dark switching up to 100 mA, response under 500 microseconds.

Documents and quotation

The manufacturer datasheet for WL18-3P630S04 is attached to this listing. Send an RFQ with the part number WL18-3P630S04, quantity and delivery point in Oman or the GCC for availability and lead time.

Other Models in the Sick Wl18 3 Range

Seven Star LLC supplies models from the Sick Wl18 3 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
SICK WL18-3N430 NPN Retro-Reflective Photoelectric SensorInductive Proximity SensorsView details
SICK WL18-3P130S06 Cable Version Retro-Reflective SensorInductive Proximity SensorsView details
SICK WL18-3P630S04 Vibration-Resistant Retro-Reflective SensorInductive Proximity SensorsYou are viewing this model
SICK WL18-3P430 W18-3 Retro-Reflective Photoelectric SensorInductive Proximity SensorsView details
Datasheets & Documents
  • PDF Datasheet SICK WL18-3P630S04 Vibration-Resistant Retro-Reflective Sensor Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

SICK is the German maker of industrial sensors: photoelectric and proximity sensors, safety laser scanners and light curtains, encoders, distance sensors, code readers and gas analysers. Erwin Sick, an optics engineer, founded it in Munich in 1946, and in 1952 it introduced its first marketable accident-prevention light curtain, which protected press operators by stopping the machine when a hand broke the light beam. The company moved to Waldkirch in the Black Forest in 1956 and is still headquartered there. It is a privately held company, and has been an Aktiengesellschaft (AG) since 1996.

SICK company profile

Founded 1946, Munich, Germany, by Erwin Sick (1909–1988)
Headquarters Waldkirch, Baden-Württemberg, Germany (since 1956)
Ownership Privately held; after the founder's death in 1988 his widow Gisela Sick became the main shareholder. Legal form SICK AG since 1996
Size More than 12,000 employees and group revenue of about EUR 2.3 billion (company figures for 2023)
First breakthrough Accident-prevention light curtain for presses, shown in Hanover in 1952
International growth First foreign subsidiary in France in 1972, United States in 1976; today sales and service companies worldwide
Product families Photoelectric, inductive, capacitive, magnetic and ultrasonic sensors; safety laser scanners, light curtains, safety controllers and relays; encoders and motor feedback systems; distance sensors and LiDAR; barcode and 2D code readers and machine vision; gas analysers, dust and flow measurement for process and emissions monitoring

Milestones

  • 1946: Erwin Sick receives a licence to run his engineering firm in Munich.
  • 1952: The first marketable accident-prevention light curtain is presented in Hanover and goes into series production.
  • 1956: The company moves to Waldkirch with 25 employees.
  • 1972 and 1976: Subsidiaries are founded in France and the United States.
  • 1996: SICK becomes an Aktiengesellschaft.
  • Today: Sensors for factory and logistics automation, machine safety and process analysis, with a large share of revenue outside Germany.

Choosing a SICK sensor

For object detection, the sensing principle comes first. A retro-reflective sensor (WL series) sends light to a reflector and switches when an object breaks the beam; it is reliable over long distances and easy to align. A sensor with background suppression (WTB series) detects an object at a set distance and ignores what is behind it, which suits conveyors with shiny or dark backgrounds. A through-beam pair (WS/WE) gives the longest range and the highest reliability in dust. For transparent bottles and film, use a model built for transparent objects (for example WL12G-3B or WL150-P420). The digits in the code also matter: "P" usually means a PNP output and "N" NPN, and the last digits set the connector or cable. For machine guarding, a safety laser scanner such as nanoScan3 or microScan3 protects an area, while a safety controller such as Flexi Soft combines several safety devices.

Where SICK products are used

In Oman and the GCC, SICK sensors are used in packaging and bottling lines, food and beverage plants, logistics and airport baggage handling, cement and steel plants, ports and cranes, automated warehouses, and on machines built by European OEMs. SICK safety scanners guard robots and automated guided vehicles, and its encoders give position feedback on motors, hoists and conveyors.

SICK products we list

Family Examples
Photoelectric sensors WL12-3P2431, WTB12-3P2431, GTB6-P4211, VL18-4P3240, WL12G-3B2531, WS/WE100, KT5W contrast, W26 IO-Link
Proximity, cylinder and ultrasonic sensors IME12-08NPSZC0S, IME18-05BPSZC0S, MZT8, UM18 4-20 mA, UM30, UFN3 fork
Machine safety nanoScan3, microScan3, S300 Professional, Flexi Soft FX3-CPU1, FX3-XTIO, ReLy OSSD
Encoders and motor feedback DFS60B, AFM60 PROFINET, AFS60 SSI, ATM60 PROFIBUS, SRS50, EFS50
Distance sensors and code readers DT50, DL50, DT35, Lector632

Ordering SICK products: what we need

Send the type code and the 7-digit SICK part number from the label (for example WTB12-3P2431 together with its part number). For a replacement sensor, add the output (PNP or NPN), connection (M8, M12 or cable) and sensing distance. For encoders, add the interface (incremental, SSI, PROFIBUS, PROFINET), resolution and shaft type. For safety scanners, tell us the model and whether the existing configuration needs to be kept.

Frequently requested SICK models: SICK RT-P3231 ZoneControl Background Suppression Sensor.

Facts checked against SICK's published company history and annual figures, October 2026.

FAQ

Questions about the SICK WL18-3P630S04 Vibration-Resistant

Answers from our engineering team on installation, compatibility and integration.

01What is special about SICK WL18-3P630S04?
It has a 6-pin cubic connector, a test input for sender off and heightened vibration resistance, in a 70 g W18-3 body.
02What is the test input on WL18-3P630S04?
A sender-off input that deactivates the LED when pulled to 0 V (TE to 0 V), letting a controller check that the receiver reacts correctly.
03Which enclosure rating does WL18-3P630S04 have?
IP65, lower than the IP67 of the M12 plug version, because of the cubic connector.
04What range does WL18-3P630S04 offer?
0 to 5 m typical and 0 to 7 m maximum with PL80A, spot 40 mm at 2 m, focus 1.8 degrees.
05What are the main electrical values of WL18-3P630S04?
10 to 30 V DC, 40 mA, PNP output with light or dark switching up to 100 mA, response under 500 microseconds.