- Automation & ControlView all 2,650 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Honeywell
Honeywell UDC2500 1/4 DIN Universal Digital Controller
Description
Honeywell UDC2500 1/4 DIN universal digital controller overview
The Honeywell UDC2500 is a panel-mounted digital controller in the 1/4 DIN format (96 x 96 mm bezel). It measures temperature or another process variable, compares it with a setpoint and drives a heater, valve or other final element through PID action. The manufacturer positions it as the lower-priced member of the UDC family, keeping the familiar keypad and display layout of the older UDC2300 while adding newer functions.
Two analog inputs are available on the UDC2500. The first is a universal low-level input for thermocouples, RTDs, millivolt, milliamp and voltage signals. The second is a high-level input that accepts 0 to 5 V, 1 to 5 V, 0 to 2 V, 0 to 20 mA or 4 to 20 mA and can serve as a remote setpoint, a data acquisition channel or a value to alarm on. Because everything is configured from the keypad, an installer does not open the case to move jumpers.
This page summarises the manufacturer documentation for the Honeywell UDC2500 for buyers in Oman and the GCC. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Key features of the UDC2500
The points below come from the manufacturer specification for the UDC2500 and explain why this model is common on furnace, oven and process skid panels.
- Accutune III tuning is standard: at the touch of a key or through a digital input the controller identifies the process and sets its own PID constants, with Fast Tune, Slow Tune and Heat/Cool duplex tuning choices.
- Fuzzy logic overshoot suppression works alongside the PID terms to limit overshoot after setpoint changes or outside disturbances, without altering the stored tuning constants.
- Both analog inputs are sampled six times per second (every 166 ms) with typical 16-bit resolution and a typical accuracy of 0.25 percent of full scale.
- Up to five outputs can be fitted, chosen from current, electromechanical relay, solid state relay, dual relay and open collector types, with algorithms such as time proportional, current proportional, duplex and three position step control.
- Optional RS422/485 Modbus RTU or Ethernet 10Base-T Modbus TCP/IP links connect the UDC2500 to a PLC or host, and an infrared port allows non-intrusive configuration from a PC or Pocket PC.
- A standard timer runs from 0 to 99 hours 59 minutes, and optional setpoint ramp and soak programming stores six ramp and six soak segments.
- The front face is rated NEMA4X and IP66 when the four corner screws are fitted, which suits wash-down and dusty locations.
- Prompts can be shown in English, French, German, Spanish or Italian, and five keyboard security levels protect tuning, configuration and calibration data.
UDC2500 technical specifications
The table gives the main data for the UDC2500 from the manufacturer specification sheet. Output and option combinations depend on the model code, so confirm them against the selection guide before ordering.
| Parameter | Value |
|---|---|
| Model | UDC2500 |
| Format | 1/4 DIN panel mount, 96 x 96 mm bezel |
| Analog input 1 | Universal: thermocouple, RTD, mV, mA, V |
| Analog input 2 (optional) | High level: 0-5 V, 1-5 V, 0-2 V, 0-20 mA, 4-20 mA |
| Input accuracy | 0.25 percent of full scale typical, can be field calibrated to 0.05 percent |
| Resolution and sampling | 16-bit typical, six samples per second (166 ms) |
| Digital filter | Off to 120 seconds, selectable |
| Sensor break action | Upscale, downscale, failsafe or none |
| Output types | Current 4-20 or 0-20 mA, relay 5 A, dual relay 2 A, solid state relay 1 A, open collector |
| Alarms | One or two relays, up to four alarm setpoints |
| Digital inputs (optional) | Two isolated dry-contact inputs |
| Transmitter power | Up to 30 V dc for a two-wire transmitter |
| Communications (optional) | RS422/485 Modbus RTU, Ethernet 10Base-T Modbus TCP/IP, infrared |
| Power supply | 90 to 264 V ac, 50/60 Hz; 24 V ac/dc optional |
| Power consumption | 20 VA maximum (90-264 V ac), 15 VA maximum (24 V) |
| Front face rating | NEMA4X and IP66 with screws; NEMA3R and IP54 otherwise |
| Operating temperature | 0 to 55 degC operative limits, 5 to 90 percent RH |
| Depth and weight | 114 mm behind panel, 1.3 kg |
| Approvals | UL listed, CE; CSA and FM (limit model) optional |
Typical applications in Oman and the GCC
The UDC2500 is a general-purpose loop controller, so it appears wherever a single temperature, pressure, level or flow loop needs a dependable local station. Typical uses for buyers in Oman and the GCC include the following.
- Oil and gas: skid-mounted heaters, glycol and methanol injection heating, chemical dosing tanks and instrument enclosure heating where a stand-alone controller is preferred to a DCS channel.
- Utilities and power: oil bath and bearing temperature control, auxiliary boiler feedwater heating and small furnace loops that need relay or 4-20 mA outputs.
- Water and wastewater: heated digesters, chemical storage temperature control and dosing loops that use the remote setpoint input from a PLC.
- Manufacturing: ovens, kilns, plastic processing machines, packaging lines and environmental chambers, using the ramp and soak option or the timer for batch cycles.
Selection and compatibility notes for the UDC2500
Choose the UDC2500 when one loop is enough and the application needs more than a basic on/off thermostat: remote setpoint, Ethernet or Modbus reporting, a timer or a programmed ramp. If you need two loops, cascade or math functions, the manufacturer offers the UDC3200 and UDC3500 in the same 1/4 DIN size, and the same communication option types allow them to share a network with the UDC2500.
Match the output to the final element before ordering. A 4-20 mA output suits valves and SCR power controllers, a 5 A relay suits contactors and small heaters, and a solid state relay output suits fast-cycling heaters. Heat and cool applications use the duplex algorithms. The UDC2500 is also described as downward compatible with most UDC2300 installations, which helps when a failed unit is replaced in an existing panel, but always compare terminal wiring and the model code on the nameplate.
Installation and commissioning of the UDC2500
Install the UDC2500 in a rigid panel and follow the wiring diagram in the manufacturer manual.
- Cut the panel to the 1/4 DIN opening, allow 114 mm depth behind the panel and keep the terminal side inside a protected enclosure.
- Fit and tighten the four corner screws if the NEMA4X and IP66 rating is required at the front face.
- Use shielded cable for thermocouple, RTD and communication wiring and keep it away from heater and motor power cables.
- Set input type, range, alarms and output action from the keypad, then run Accutune III at the normal operating setpoint.
Maintenance and service life
The UDC2500 has no user serviceable parts behind the display. Keep the front face clean with a damp cloth, check that the screws and gasket remain tight, and verify the input calibration at the interval your quality system requires. The manufacturer states that the controller can be field calibrated, and configuration can be uploaded and saved from the infrared port, so keep a backup file for each installed unit to speed up replacement.
Related products and ordering notes
Related Honeywell controllers available through Seven Star LLC on request include the UDC2800, UDC3200 and UDC3500 for larger or more demanding loops. Please quote the full model code from the nameplate or your specification, including input, output and option digits, so that the correct configuration is quoted.
UDC2500 questions in brief
Buyers most often ask about inputs, outputs, communication and tuning. The UDC2500 has one universal and one high-level analog input, up to five outputs, optional Modbus or Ethernet communication and standard Accutune III tuning. The answers below repeat the main points for quick reference.
Documents and quotation
The manufacturer datasheet for the UDC2500 is available from Seven Star LLC with this listing when it is attached, and it should be read together with the installation manual before any engineering decision. To request a quotation, send an RFQ that states the part number UDC2500, the quantity, the delivery location and, where relevant, the options you need. Seven Star LLC replies with availability and lead time; no price is published on this page.
Datasheets & Documents
- Datasheet Honeywell UDC2500 1/4 DIN Universal Digital Controller Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Honeywell is the American industrial technology group whose products on this site cover gas and flame detection, pressure transmitters, flow measurement, gas metering, fire alarm systems and helicopter rotor balancing equipment. Its roots go back to a thermostat business in Minneapolis in 1885 and to Mark Honeywell's heating company, which merged with it in 1927. Several brands we list have joined Honeywell over the years: Gent fire systems of Leicester (part of Honeywell since 2005), Chadwick-Helmuth (a Honeywell business unit from 2002) and Elster gas metering (acquired around the end of 2015).
Seven Star LLC is an independent supplier in Muscat. We list Honeywell gas detectors and sensors, transmitters, Elster gas meters and flow computers, Gent fire alarm equipment and Chadwick-Helmuth balancers, and supply them and their spares in Oman and the GCC by part number.
Honeywell company profile
| Origins | 1885, Minneapolis (Butz thermostat business); merged with Mark Honeywell's company in 1927 |
|---|---|
| Brands in our range | Honeywell Analytics gas detection, SmartLine transmitters, Elster gas metering, Gent fire detection, Chadwick-Helmuth rotor track and balance |
| Gent | Founded in Leicester, UK, around 1872 by John Thomas Gent; part of Honeywell since 2005 |
| Elster | Gas, water and electricity metering; bought by Honeywell from Melrose, deal completed around the end of 2015 |
Milestones
- 1885: The Butz thermostat business starts in Minneapolis.
- 1927: It merges with Mark Honeywell's company.
- 2005: Gent fire detection (Leicester, UK) becomes part of Honeywell.
- 2015: Honeywell completes the purchase of Elster from Melrose around the end of the year.
Honeywell products we list
| Family | Models | Typical use |
|---|---|---|
| Fixed gas detectors | Searchline Excel, Searchline Excel Plus, 02104-N-XSSA, Sensepoint XCD RTD, Sensepoint XCD IR, XCD H2, Sensepoint XCL, Sensepoint XRL, OmniPoint, RAEGuard 2 PID | Flammable, toxic and VOC gas detection in process areas |
| Sensors, flame detection and control | SR-W-MP75C LEL sensor, SR-X2V O2 sensor, FS24X Plus flame detector, R4343E flame switch, System 57 card, 5704FS panel | Replacement sensors, fire detection and gas detection control panels |
| Transmitters and flow | SmartLine STG700, STG800, STR82D remote seal, VersaFlow Coriolis | Process pressure and mass flow measurement |
| Elster gas metering | Q.Sonic plus, TRZ2, Quantometer, RABO, IRM-3 DUO, EK280, EC 350, enCore FC1, enCore ZM1, gas-net F1, gas-net D2, GasLab Q2, USM display | Gas meters, volume correction and fiscal flow computing |
| Gent fire alarm systems | Vigilon Plus, Vigilon Compact Plus, Nano, Xenex, S-Quad detector, S-Cubed, ALD302 base, S4-34420 interfaces, loop card, repeat panel, mimic panel, XENS-850 call point, 74430 bell | Addressable and conventional fire alarm systems in buildings and plants |
| Chadwick-Helmuth rotor track and balance | 8500C, 8500C Plus, Vibrex 2000, Model 11, photocell system, printer, bracket, protractor | Helicopter rotor track and balance and propeller balancing |
Gas detection uses two basic approaches. Point detectors such as the Sensepoint XCD measure the gas at one location, with a catalytic or infrared sensor for flammable gas and an electrochemical cell for toxic gas such as H2S. Open path detectors such as the Searchline Excel send an infrared beam across an area up to a few hundred metres long and detect a gas cloud anywhere along it. Infrared sensors cannot be poisoned the way catalytic beads can, which matters on sites with silicones or H2S.
Where Honeywell products are used
In Oman and the GCC, Honeywell gas detectors protect wellheads, gas plants, refineries and tank farms. Elster meters and flow computers measure gas at city gate stations and in industry. Gent systems are installed in commercial buildings, hospitals and hotels, and Chadwick-Helmuth balancers are used by helicopter operators.
Ordering Honeywell products: what we need
Send the part number from the label (for example 02104-N-XSSA or SPXCDASMTXF). For gas detectors, add the gas, range, output and certification. For gas meters, add size (DN), flow range and pressure rating. For Gent equipment, add the panel type and loop protocol.
Facts checked against Honeywell press releases and SEC filings, and published histories of Gent and Chadwick-Helmuth, October 2026.
Browse Honeywell products by category: Fire & Gas Detector, Vibration, Flowmeters, Pressure Instrumentation, Temperature Instrumentation.
FAQ
Questions about the Honeywell UDC2500 1/4 DIN Universal Digital
Answers from our engineering team on installation, compatibility and integration.
01What inputs does the UDC2500 accept?
Input 1 takes thermocouple, RTD, millivolt, milliamp and voltage signals, and the optional input 2 accepts 0-5 V, 1-5 V, 0-2 V, 0-20 mA and 4-20 mA signals.
02Does the UDC2500 support Ethernet or Modbus?
Yes. An RS422/485 Modbus RTU option and an Ethernet 10Base-T Modbus TCP/IP option are available, and an infrared port can be used for configuration.
03What is the supply voltage and front rating of the UDC2500?
It runs from 90 to 264 V ac at 50/60 Hz, with 24 V ac/dc as an option, and the front face is NEMA4X and IP66 when the corner screws are fitted.
04How does the UDC2500 tune itself?
Accutune III identifies the process on demand and sets PID constants, with Fast Tune, Slow Tune and Heat/Cool duplex tuning, plus fuzzy logic to limit overshoot.
05How can I request a quotation for the UDC2500?
Send an RFQ with the full model code, quantity and delivery location. Seven Star LLC will reply with availability and lead time; this page shows no price.


















Reviews
There are no reviews yet.