Brand:

Swagelok SK Series Multipurpose Ball Valve, 316 SS, 6000 psig

Description

Swagelok SK series multipurpose ball valve for compact 6,000 psig service

The Swagelok SK series is a small, panel-mountable quarter-turn ball valve with a 316 stainless-steel body, PEEK seats and a floating stainless ball. It is rated for working pressures up to 6,000 psig (413 bar) and sits between the lightweight instrument ball valves of the 40 series and the larger trunnion designs of the 83 series, offering a Cv of 0.9 to 1.4 in a very compact body. Seven Star LLC supplies Swagelok SK series ball valves in Oman and the GCC as an independent supplier in Muscat.

Typical uses are shutoff and isolation on instrument and sample lines, gas panels, hydraulic test circuits and alternative-fuel systems in which a small, quick-acting, bidirectional valve with an O-ring stem seal is required. The catalog lists end connections in 1/4 and 3/8 in. and 6 and 8 mm sizes.

Parameter Specification
Manufacturer / part number Swagelok SK series multipurpose ball valve (for example SS-4SKPS4)
Working pressure 6,000 psig (413 bar) at 0 to 250 °F; 3,000 psig (206 bar) at 302 °F
Temperature −40 to 302 °F (−40 to 150 °C); low-temperature version −40 to 200 °F
Flow coefficient (Cv) 0.9 to 1.4, depending on end connection
Body, ball and stem 316 SS (ASTM A479 / A276)
Seats Spring-loaded PEEK
Stem seal O-ring; no packing adjustment
Handle Nylon directional with 300 series SS insert; black standard, other colors and stainless versions available
Flow direction Bidirectional
Mounting Standard panel mounting, panel hole 25/32 in. (19.8 mm)
Fugitive emissions API 641 low-emission certificates available for valves with standard FKM O-rings

Construction of the SK ball valve

The ball is a floating, 316 SS ball held between two spring-loaded PEEK seats. The seat springs keep a load on the seats in both low-pressure and high-pressure operation, and the system pressure adds to the seating force, so the valve seals in both directions. PTFE backup rings and low-temperature fluorocarbon O-rings complete the seat and stem sealing. The stem has an O-ring seal with a PEEK thrust washer, a chamfered PEEK backup ring and a PTFE stem backup ring, so no packing adjustment is needed during life.

A directional handle indicates the open and closed position and the flow direction. Valves are field-rebuildable with a seal kit, and the valve is tested in both flow directions with nitrogen at 1,000 psig (69 bar), with a maximum seat leak rate of 0.1 std cm³/min and no detectable shell leakage.

  • Quarter-turn operation with low torque.
  • Compact body with high flow for its size.
  • Field rebuild with a seal kit.
  • Standard cleaning to Swagelok SC-10, with SC-11 available for Level C cleanliness to ASTM G93.

Ordering numbers, flow coefficient and dimensions

End connection Ordering number Cv Length A
1/4 in. Swagelok tube fitting SS-4SKPS4 1.3 3.60 in. (91.4 mm)
3/8 in. Swagelok tube fitting SS-4SKPS6 1.4 3.73 in. (94.7 mm)
6 mm Swagelok tube fitting SS-4SKPS6MM 1.3 3.60 in. (91.4 mm)
8 mm Swagelok tube fitting SS-4SKPS8MM 1.3 3.68 in. (93.5 mm)
1/4 in. female NPT SS-4SKPF4 1.2 2.91 in. (73.9 mm)
1/4 in. female ISO SS-4SKPF4RT 1.2 2.91 in. (73.9 mm)
1/4 in. male NPT SS-4SKPM4 1.1 3.23 in. (82.0 mm)
1/4 in. male VCO SS-4SKPVCO4 0.9 3.15 in. (80.0 mm)

The tube fitting versions use Swagelok gaugeable tube fittings; pressure ratings of tube-fitting valves follow the Swagelok tubing data, and VCO versions follow the rating of the mating fitting.

Options: handles, low temperature, sour gas and ECE R110

The catalog lists several handle options. Black nylon directional is the default, colored handles are chosen with a designator (-BL, -GR, -OG, -RD, -YW), a nylon oval handle is -K, a stainless-steel directional handle suited to continuous elevated ambient temperatures is -SHD, and -NH supplies the valve without a handle. Handle kits are available for field assembly and a locking bracket can lock the valve open or closed.

  • Low-temperature service: insert L in the ordering number (for example SS-L4SKPS4); the rating is −40 to 200 °F (−40 to 93 °C) with Buna C O-rings.
  • Sour gas: valves for service to NACE MR0175 / ISO 15156 use alloy 400 end screws, packing bolt, stem and ball with ethylene propylene O-rings; order with MX in place of SS and add -SG.
  • Alternative fuel: valves with ECE R110 type approval (manual service valve, class 0, 3,770 psig / 260 bar, −40 to 248 °F) are ordered by adding -DE.

Pressure-temperature behaviour and operating notes

The standard valve is rated 6,000 psig (413 bar) from 0 to 250 °F (−17 to 121 °C) and 3,000 psig (206 bar) at 302 °F (150 °C). Because the pressure rating drops sharply above 250 °F, hot sample lines and steam-traced pipe need a careful check against the rating, and for higher temperatures other Swagelok families such as the 83 or H83 series should be considered.

As with other Swagelok ball valves, the SK is designed to be used fully open or fully closed, and it is not a throttling valve. A valve that has not been cycled for a time may have a higher initial actuation torque.

Typical applications of the SK series in Oman and the GCC

The SK series fits compact skid-mounted systems: hydraulic and pneumatic test rigs, chemical injection skids at oil and gas facilities, fuel gas and instrument gas panels, and sampling systems at refineries, power stations and desalination plants. Its low-temperature option is useful for LNG, cold nitrogen and refrigerated lines, and the alternative-fuel approvals are relevant to CNG and hydrogen refueling installations that are beginning to appear in the region. The O-ring stem seal removes the need for packing adjustment on panels that are hard to reach, which helps on equipment that is rarely shut down.

SK series compared with other Swagelok ball valves

Series Role
SK series Compact, to 6,000 psig, PEEK seats, Cv 0.9 to 1.4, panel mount
40 and 40G series One-piece instrumentation ball valves, widely used on instrument lines
60 series General purpose three-piece ball valve, larger sizes
83 and H83 series Trunnion ball valves for higher pressure and flow
AFS series Alternative fuel service, Cv 4.0 to 13.8, to 6,000 psig

Selecting between them is a matter of pressure, flow, size and the process medium; the SK is the compact option when space and weight are limited.

Selection checklist for an SK ball valve

  • Maximum pressure and temperature, including any hot cleaning or steam tracing.
  • Required Cv against 0.9 to 1.4.
  • End connection, size and tube standard.
  • Handle color or material; locking requirements.
  • Special service: sour gas, low temperature, alternative fuel type approval.
  • Cleaning level and low-emission certificate.

Information to send with an SK RFQ

  • Fluid, pressure and temperature.
  • Connection type and size.
  • Handle, option and cleaning requirements.
  • Quantity and delivery location.

Documents and quotation

The Swagelok SK series multipurpose ball valve catalog is attached to this page. Send your service data and we will confirm the ordering number and available documents.

Datasheets & Documents
  • PDF Catalog Swagelok SK Series Multipurpose Ball Valves Catalog Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Swagelok is the American maker of tube fittings and small-bore valves, best known for its two-ferrule compression tube fitting. Fred A. Lennon and Cullen B. Crawford founded it in Cleveland, Ohio, in July 1947 as Crawford Fitting Company to make that fitting. Lennon bought the whole business and the patent in 1948, and the company has been based in Solon, Ohio, since the mid-1960s.

Seven Star LLC is an independent supplier in Muscat. We list Swagelok tube fittings, needle, ball, check, relief and metering valves, filters, regulators and sample cylinders, and supply them for instrument tubing and analyser systems in Oman and the GCC by exact part number.

Swagelok company profile

Established July 1947, Cleveland, Ohio, as Crawford Fitting Company
Founders Fred A. Lennon and Cullen B. Crawford; Lennon bought out Crawford in 1948
Headquarters Solon, Ohio, since the mid-1960s
Product families Tube fittings and adapters, face seal fittings, needle, ball, plug, check, relief and diaphragm valves, filters, regulators, quick-connects, sample cylinders and hoses

Milestones

  • 1947: Fred A. Lennon and Cullen B. Crawford found Crawford Fitting Company in Cleveland in July.
  • 1948: Lennon buys out Crawford.
  • Mid-1960s: Headquarters move to Solon, Ohio.

Swagelok products we list

Family Models Typical use
Tube fittings Overview, SS-810-6 union, SS-810-3 tee, SS-810-9 elbow, SS-810-4 cross, SS-810-1-8 male connector, SS-810-7-8 female connector, SS-810-61 bulkhead, SS-12M0-6 metric union, VCR face seal Leak-tight connections on instrument and process tubing
Needle and metering valves SS-1RS4, SS-1RF4, SS-18RF6, SS-6NBS6, SS-20VS4, SS-4MG Isolation and fine flow adjustment on instrument lines and sample systems
Ball and plug valves 40G, 40GX 3-way, 60 Series, 83 Series, P4T plug Quick quarter-turn shut-off and switching
Check, relief and sealed valves SS-4C-1, CH, R3A, RL3, SS-4BK bellows, SS-DLS4 diaphragm Backflow prevention, overpressure relief and leak-free sealing for toxic or high-purity media
Filters, regulators, sampling SS-4F-2, SS-4TF-7, KPR regulator, sample cylinders, QC quick-connects Analyser sample conditioning and gas or liquid sampling

A Swagelok part number can be read directly. In SS-810-6, "SS" is 316 stainless steel, "810" means a 1/2 in. tube fitting (8 sixteenths of an inch, 10 series), and "-6" is a union. A suffix such as "-8" adds a 1/2 in. NPT end, and "M0" marks metric tube, as in SS-12M0-6 for 12 mm. Tube fittings must be made up the same way every time: finger-tight, then 1 1/4 turns for most sizes. A gap inspection gauge confirms the fitting has been pulled up.

Where Swagelok products are used

In Oman and the GCC, Swagelok fittings and valves are used on instrument impulse lines, analyser sample systems, hydraulic and pneumatic control tubing, chemical injection and gas sampling in oil and gas, refining, petrochemical, power and laboratory installations.

Ordering Swagelok products: what we need

Send the full Swagelok part number (for example SS-810-6 or SS-1RS4), the material, and the tube size in inches or millimetres. For valves, add the end connections and any options. For sample cylinders, add the volume, pressure rating and end configuration.

Facts checked against Swagelok company history, October 2026.

FAQ

Questions about the Swagelok SK Series Multipurpose Ball Valve, 316 SS,

Answers from our engineering team on installation, compatibility and integration.

01What is the pressure rating of the Swagelok SK series?
The standard rating is 6,000 psig (413 bar) from 0 to 250 degrees F, derating to 3,000 psig at 302 degrees F.
02What seats does the SK ball valve use?
Spring-loaded PEEK seats with a floating 316 SS ball, giving bidirectional sealing.
03Is the valve field repairable?
Yes. The catalog states that the SK series is field rebuildable with a seal kit.
04Can SK valves be used in low-temperature service?
Yes. The low-temperature version, ordered by inserting L in the ordering number, is rated minus 40 to 200 degrees F with Buna C O-rings.
05Is panel mounting possible?
Yes. Standard panel mounting is provided with a 25/32 in. (19.8 mm) panel hole and a maximum panel thickness of 0.19 in.