VESDA VRT-J00 Remote Display & Relay Unit

Overview

The Xtralis VESDA VRT-J00 is a remote mount display and relay unit for the VESDA VLC family of aspirating smoke detectors — it is not a smoke detector itself. It is installed away from the main VLC detector, for example at a security desk, fire control room, or building management panel, and connects back to the detector to show live status and drive external devices.

Seven Star LLC supplies genuine Xtralis/VESDA early-warning fire detection components and accessories across Oman and the GCC, helping critical facilities keep their detection and alarm-interface hardware correctly specified, installed, and maintained.

How It Works

The VRT-J00 mounts a LaserCOMPACT-style display remotely and includes seven programmable relay outputs, wired back to the host VESDA VLC detector via its remote termination card. It mirrors the detector’s alarm-level indication — Alert, Action, Fire 1, Fire 2, and Fault — at the remote location, giving facility staff a live status view without needing to physically access the primary detector.

Each of the seven relays can be configured independently to trigger external equipment, such as a fire alarm panel input, a smoke damper, a shutdown relay, or a building-management-system interface, whenever the corresponding alarm threshold is reached on the connected detector. This lets a single VLC detector drive multiple coordinated safety responses from one remote interface point.

Engineering Design of the VRT-J00

The unit is designed to be installed at a manned or centrally monitored location that may be some distance from the physical VESDA detector, which is often mounted in an inaccessible space such as a ceiling void, plant room, or equipment cabinet. The remote termination card wiring between the VRT-J00 and the host detector is engineered for reliable signal transmission over the typical cable runs found in commercial and industrial buildings.

Because the display replicates the detector’s full alarm-level hierarchy rather than a simplified summary, facility operators get the same granularity of status information remotely as they would standing in front of the detector itself, which supports faster and more informed incident response.

Key Features

• Remote LaserCOMPACT-style display mirroring detector alarm status
• Seven independently programmable relay outputs
• Full Alert, Action, Fire 1, Fire 2, and Fault status indication
• Connects via remote termination card to VESDA VLC detectors
• Enables integration with fire alarm panels, dampers, and BMS interfaces
• Suitable for installation at security desks or fire control rooms
• Supports multiple coordinated safety responses from one interface
• Genuine Xtralis/VESDA accessory with full compatibility documentation

Industrial Applications

This unit is used wherever the primary VESDA aspirating detector is installed somewhere inaccessible for day-to-day monitoring, so facility staff still get a visible, actionable status display and relay outputs at a manned or centrally monitored location. It is typical in data centers, cleanrooms, telecom facilities, and other high-value spaces protected by VESDA air-sampling smoke detection.

Across Oman, Muscat, Sohar, Salalah, and the wider GCC, Seven Star LLC supports facility managers and fire safety consultants as a trusted supplier of VESDA detection accessories, helping data centers, telecom sites, and industrial control rooms maintain visible, actionable fire status at the point where staff actually work.

Technical Specifications

Why Choose Seven Star LLC for the VESDA VRT-J00

Because the VRT-J00 is a remote accessory rather than a standalone detector, it must be matched to the specific VESDA VLC model and firmware already installed at your facility before an order is confirmed, and Seven Star LLC verifies this compatibility rather than assuming any VLC-family detector will connect cleanly through the remote termination card. Getting the relay configuration right at the planning stage also matters: we work with your fire safety consultant to confirm which of the seven relay outputs need to be wired to which external device, whether a fire panel input, a smoke damper, or a shutdown circuit, before commissioning begins.

For data centers, cleanrooms, and telecom facilities where the primary VESDA detector is mounted somewhere inaccessible for daily monitoring, we help facility managers plan remote display placement at the location staff actually occupy day to day, since a remote unit installed somewhere equally inconvenient defeats much of its purpose. Where a facility is expanding its VESDA coverage to additional zones, we are glad to review your existing detector and relay inventory before recommending additional VRT-J00 units, helping keep alarm response consistent across the site.

Ongoing Support for VESDA Installations

Seven Star LLC coordinates directly with Xtralis on documentation and lead times for VRT-J00 units and related VESDA accessories, so facility managers across Oman and the GCC are not left guessing about availability on hardware that a critical early-warning fire detection system genuinely depends on. We also assist with periodic testing support, helping confirm that each of the seven relay outputs still triggers its intended external device correctly as part of a facility’s routine fire system verification, rather than that check being deferred until an actual incident reveals a wiring fault.

Request a Quote for VESDA VRT-J00 Remote Display & Relay Unit

Contact Seven Star LLC for pricing, availability, and technical support on the Xtralis VESDA VRT-J00 and the full range of VESDA aspirating smoke detection systems across Oman and the GCC.

Related Products

• Sieger Optima Plus 2108B2001 Gas Detector
• Xtralis VESDA-E VEP Aspirating Smoke Detector
• Simtronics DM-TV6-T Flame Detector
• Drager X-am 8000 Multi-Gas Detector
• MEDC BG Manual Call Point – BGEB4B6B1DDCF7R (Ex de, ATEX)
• ABB-Temperature sensor SensyTemp TSP300

See also: Xtralis VSP-964-03 VESDA-E Smoke Detection Chamber (MK3).