Brand:

Xtralis VESDA-E VEP Aspirating Smoke Detector

Description

Overview

Xtralis VESDA-E VEP is a mainstream aspirating smoke detector (ASD) engineered to deliver very early warning fire detection across a wide range of high-value and mission-critical environments. Built on Xtralis’ proprietary Flair detection technology, the VESDA-E VEP continuously draws air samples through a network of small-bore pipes into a highly sensitive laser-based detection chamber, identifying combustion particles long before visible smoke or heat would trigger a conventional point detector. Available in one-pipe and four-pipe configurations, the VEP is designed for facility engineers who need dependable, low-nuisance-alarm protection for data centers, cleanrooms, warehouses, archives, and other spaces where early intervention prevents catastrophic loss.

Working closely with plant engineers in the region, Seven Star LLC proudly supplies the VESDA-E VEP to facility owners, MEP contractors, and fire protection consultants across Oman and the GCC. Every Xtralis VESDA-E VEP unit supplied by our Muscat-based instrumentation division comes with manufacturer documentation and application engineering support, with lead time confirmed at quotation.

Detection Principle of the Xtralis VESDA-E VEP

The VESDA-E VEP relies on active aspiration rather than passive point sampling. An internal aspirator continuously pulls air from the protected space through a network of sampling pipes — up to 130 m of branched pipe on the one-pipe model and up to 560 m on the four-pipe model — and channels it into the Flair detection chamber. There, a short-wavelength laser illuminates the sampled air stream, and light scattered by suspended combustion particles is captured by a CMOS imager combined with multiple photo-diodes. This direct-imaging approach generates substantially more particle data than conventional single-point light-scattering detectors, allowing the Xtralis VESDA-E VEP to characterize particle behavior and distinguish genuine incipient fire signatures from dust, steam, or other nuisance sources.

Because detection happens centrally within a sealed, multi-stage filtered chamber rather than at dispersed ceiling-mounted heads, the VEP achieves absolute calibration that remains stable over its operating lifetime, with no drift compensation required. The practical result is a detector with four independently configurable alarm levels — Alert, Action, Fire 1, and Fire 2 — and a sensitivity range spanning 0.005% to 20% obscuration per meter, giving engineers the flexibility to tune response thresholds precisely to the risk profile of each protected zone while keeping false-alarm rates low.

Engineering Design of the Xtralis VESDA-E VEP

Physically, the Xtralis VESDA-E VEP is housed in a compact 350 mm x 225 mm x 135 mm enclosure weighing approximately 4.0 kg, sharing the same mounting footprint, pipe entry, conduit, and electrical connector positions as the legacy VESDA VLP — a deliberate design choice that simplifies retrofit upgrades on existing aspirating systems. The four-pipe Xtralis VESDA-E VEP-A10-P variant adds a 3.5-inch icon-based LCD display for on-unit status review, while LED-only variants (VEP-A00-1P, VEP-A00-P) suit installations where remote monitoring software handles day-to-day status checks.

On the Xtralis VESDA-E VEP, field wiring and commissioning are handled through four 26 mm cable entries, seven programmable relay outputs rated 2 A at 30 VDC, and two programmable general-purpose inputs. The detector communicates over VESDAnet for redundant, bi-directional network reporting, and adds Ethernet and WiFi connectivity as standard so technicians can configure, commission, and monitor the unit remotely using Xtralis VSC and iVESDA software without opening the enclosure. Field-replaceable sub-assemblies — aspirator, smoke detection chamber, sampling module, and filter — mean routine maintenance is completed in minutes rather than requiring full unit replacement.

Key Features

The VESDA-E VEP combines laser-based Flair detection with practical engineering advantages that reduce total cost of ownership over the life of the installation.

  • Flair detection technology delivers very early warning with the best-in-class nuisance alarm rejection across a wide range of environmental conditions.
  • One-pipe and four-pipe models support pipe networks up to 130 m and 560 m respectively, covering up to 2,000 m² per detector.
  • Four independently configurable alarm levels — Alert, Action, Fire 1, Fire 2 — provide graduated response matched to facility risk tolerance.
  • Multi-stage filtration with clean air barriers protects the optical chamber and ensures consistent detection performance over the product lifetime.
  • AutoConfig and AutoLearn Smoke and Flow automate airflow normalization and alarm threshold learning for rapid, accurate commissioning.
  • Ethernet and WiFi connectivity, alongside VESDAnet and USB, enable remote configuration, secondary monitoring, and firmware upgrades.
  • An extensive 20,000-event log supports detailed diagnostics, trend analysis, and predictable filter and maintenance scheduling.
  • Backward compatibility with VESDA VLP and existing VESDAnet infrastructure simplifies upgrades without re-cabling or re-piping.

Industrial Applications

The VESDA-E VEP is specified wherever early smoke detection protects irreplaceable assets or business continuity. Data centers and telecom facilities rely on the Xtralis VESDA-E VEP to catch overheating cable insulation and electronic component failures before they escalate, while semiconductor fabs and pharmaceutical cleanrooms depend on its low-nuisance-alarm profile to avoid costly unplanned shutdowns triggered by process particulates. Cold storage, warehousing and logistics operations, correctional facilities, hospitals, and heritage buildings across the region also use the VEP where standard point detectors cannot reach or would react too slowly to prevent loss.

With fast quotation turnaround and technical support, Seven Star LLC distributes and supports the VESDA-E VEP for district cooling plants, hospitality developments, hospital complexes, and industrial facilities throughout the Sultanate of Oman, Muscat, and the wider GCC, including projects in the Sohar and Salalah economic zones. Our instrumentation engineers assist with ASPIRE-based pipe network design, on-site commissioning, and ongoing maintenance contracts, ensuring the detection system performs to specification from day one through years of operation.

Technical Specifications

The table below summarizes the core specifications of the Xtralis VESDA-E VEP aspirating smoke detector — the Xtralis VESDA-E VEP is the reference model for this product family.

Parameter Specification
Model VEP-A00-1P / VEP-A00-P / VEP-A10-P
Detection Technology Flair laser-based aspirating smoke detection
Supply Voltage 18–30 VDC (24 V nominal)
Power Consumption 7.0 W to 11.6 W depending on model and aspirator setting
Area Coverage 1,000 m² (one pipe) / 2,000 m² (four pipe)
Pipe Length (Branched) Up to 130 m (one pipe) / up to 560 m (four pipe)
Dynamic Range 0.001% to 32% obs/m
Sensitivity Range 0.005% to 20% obs/m
Alarm Levels Alert, Action, Fire 1, Fire 2
Communication VESDAnet, Ethernet, WiFi, USB
Relays 7 programmable relays, 2 A @ 30 VDC
Dimensions 350 mm x 225 mm x 135 mm
Weight 4.0–4.1 kg
Operating Temperature 0°C to 39°C ambient; sampled air –20°C to 60°C
IP Rating IP40
Event Log Up to 20,000 events
Approvals UL, ULC, FM, CE, VdS, EN 54-20, ISO 7240-20

Request a Quote for Xtralis VESDA-E VEP Aspirating Smoke Detector

Facility engineers and fire protection consultants in Oman and the GCC can request a formal RFQ for the Xtralis VESDA-E VEP directly from Seven Star LLC. With engineering support in Muscat, we supply on request, provide the full technical datasheet and engineering specification on request, and connect project teams with our instrumentation division for ASPIRE pipe network design support. Contact Seven Star LLC today to confirm lead times, pricing, and commissioning support for your Xtralis VESDA-E VEP deployment.

Related Products

Datasheets & Documents
  • PDF Brochure Xtralis VESDA-E VEP Aspirating Smoke Detector Catalog Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Xtralis is the maker of VESDA aspirating smoke detectors, now part of Honeywell. The company was founded in Australia in 1982 and incorporated in 1983 as Vision Fire & Security Pty Ltd. It later added video and perimeter security through acquisitions, and Honeywell agreed to buy Xtralis in February 2016.

Seven Star LLC supplies Xtralis VESDA detectors and spare parts to facility and fire system teams in Oman, including filter cartridges, detection chambers, power supplies and remote displays.

Xtralis company profile

Founded 1982, Australia, as Vision Fire & Security
Best-known product VESDA (Very Early Smoke Detection Apparatus) aspirating smoke detection
Ownership Honeywell, after an agreement announced on 4 February 2016
Acquisitions ASIM Technologies and VSK Group in 2007, HeiTel Digital Video in 2011
Product families VESDA-E VEP, VEU and VES aspirating detectors, VESDA VLF, ICAM, OSID open-area beam detection, ADPRO perimeter and video security

Milestones

  • 1982: Vision Fire & Security is founded in Australia.
  • 2007: Xtralis acquires ASIM Technologies and VSK Group.
  • 2016: Honeywell agrees to acquire Xtralis.

Xtralis VESDA detectors and spares listed here

Two generations appear in the listing. From the earlier VESDA range come the VLC-505, a compact detector for single areas with VESDAnet communication, and the VESDA VLI, built for dusty industrial environments. The current generation is VESDA-E, represented by the VEP detector.

Spare parts follow VSP numbers:

  • VSP-962 filter cartridge for VESDA-E detectors
  • VSP-972 filter cartridge for the VESDA-E VEA
  • VSP-964-03 smoke detection chamber (MK3) for VESDA-E

System accessories listed include the VPS-215-E power supply and the VRT-J00 remote display and relay unit.

Where VESDA aspirating detection is used

Aspirating detection is chosen where point detectors respond too late or cannot be reached for testing: data halls and telecom rooms, switchgear and control rooms, clean rooms, cold stores, warehouses with high racking, cable tunnels and heritage buildings. The VLI extends this to dirty areas such as conveyors and process buildings. Such sites are common in the GCC, where data centers and utility substations are expanding.

Xtralis products we list

Family Examples
Fire & Gas Detectors VESDA Detector VLC505, VESDA VRT-J00 Remote Display & Relay Unit, VESDA VLI Industrial Aspirating Smoke De…, VESDA VPS-215-E Aspirating Smoke Detecto…, VESDA-E VEP Aspirating Smoke Detector, VLC-505 Aspirating Smoke Detector, VSP-962 VESDA-E Filter Cartridge, VSP-964-03 VESDA-E Smoke Detection Chamb… and 1 more

Ordering VESDA parts: what we need

Send the detector model and part number from the detector label, for example VLC-505 or the VEP variant code, with the serial number. VESDA-E detectors are made in several variants by pipe count and display type, so the complete code is needed. For filters and chambers, give the VSP number and the detector it serves. For a new detector, the pipe network design has to exist first: tell us the model selected by your designer and the fire panel interface required. We check each number against Xtralis documentation.

Facts checked against published Xtralis company histories and trade press, October 2026.

FAQ

Questions about the Xtralis VESDA-E VEP Aspirating Smoke Detector

Answers from our engineering team on installation, compatibility and integration.

01What makes the Xtralis VESDA-E VEP different from a standard point smoke detector?
The VESDA-E VEP is an aspirating smoke detector that actively draws air samples through a pipe network into a highly sensitive laser-based Flair detection chamber, identifying combustion particles at concentrations far below what a point detector can sense. This gives facility teams a genuine very-early-warning capability rather than a reactive alarm after visible smoke has already spread.
02How much sampling pipe can one VESDA-E VEP detector support?
The one-pipe VEP model supports up to 130 m of branched sampling pipe, while the four-pipe model supports up to 560 m across four pipes, covering up to 2,000 m² of protected area from a single detector. This reduces the number of detector units and control panels needed for large facilities compared with point-detection systems.
03Is the VESDA-E VEP compatible with existing VESDA installations?
Yes. The VEP shares the same mounting footprint, pipe entry, conduit, and electrical connector positions as the legacy VESDA VLP, and it remains fully compatible with existing VESDAnet networks, so upgrades from older VESDA detectors do not require re-piping or re-cabling.
04Can the VESDA-E VEP be monitored and configured remotely?
Yes. The detector includes Ethernet and WiFi connectivity as standard alongside VESDAnet and USB, allowing technicians to commission, configure, and monitor the unit remotely using Xtralis VSC and iVESDA software without physically opening the enclosure.
05Is Seven Star LLC an experienced supply partner for Xtralis products?
Yes. Seven Star LLC is an experienced supplier of Xtralis in Oman and the GCC, supplying VESDA-E VEP units and spares on request with technical support.