- Automation & ControlView all 2,481 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Masoneilan
Masoneilan 74000 Series Heavy Oil Erosion-Resistant Control Valve
Description
Overview
The Masoneilan 74000 Series is an erosion-resistant angle control valve from Baker Hughes, built for hydrocarbon service where high temperature, high pressure, high pressure drop, severe coking, erosive particles and flashing liquids occur together. The Masoneilan 74000 is the Baker Hughes answer to resid hydroprocessing and heavy oil letdown, and the product page describes more than 35 years of installation history in advanced refining operations. It is particularly suited to pressure or level control systems and to emergency blowdown or dropout service.
In Oman and the GCC, Seven Star LLC proudly supplies the Masoneilan 74000 Series Heavy Oil Erosion-Resistant Control Valve to refining and heavy-oil projects across the Sultanate of Oman and the wider GCC. Our Muscat instrumentation and valve team works with licensors and contractors on trim selection and actuation, and the Baker Hughes technical specification is available for download from this page.
Operating Principle
The Masoneilan 74000 is a flow-to-close angle valve. The inner body contours are streamlined to give maximum throat efficiency and freedom from erosion, and to eliminate pockets that cause flow reversal and eddy currents. Provision is made for introducing a flushing medium when the fluid carries solid particles, or to prevent coke formation in refinery service at extremely high temperatures.
Two plug designs are offered. The bull-nose plug is top guided, while the fluted plug, based on Masoneilan axial flow technology, is guided at both top and bottom for added stability and resistance to vibration. The flow characteristic is modified linear, rangeability is 50:1, and the standard seat leakage class is Class IV. Because high pressure drop and multi-phase flow cause vibration, Baker Hughes recommends high-thrust, high-stiffness piston actuation, with a direct actuator for air-to-push-down action and a reverse actuator for air-to-push-up action.
Engineering Design of the Masoneilan 74000
The Masoneilan 74000 Series uses a two-piece angle body with an integral bonnet and flanged or hub end connections. The technical specification lists sizes from 1 to 12 inches (DN 25 to 300) with expanded outlets, ASME Class 600 and Class 2500, and body material of 347 stainless steel. The specification notes that the outlet is always larger than the inlet to allow for fluid vaporization, and its tables list combinations such as a 2-inch inlet with a 3-inch outlet up to a 10-inch inlet with a 12-inch outlet in Class 2500, and 4-inch to 8-inch inlets in Class 600.
Trim is where the erosion problem is solved. Baker Hughes lists Inconel 718, ceramic and tungsten carbide as trim materials, with tungsten carbide on moving components and ceramics on stationary components, and a body-retained seat ring with a sacrificial ceramic venturi for protection. A purge connection for flushing the upper body cavity prevents coking. Published rated Cv values run from 7 to 530 for the fluted trim and from 18 to 730 for the bull-nose trim across the listed size and trim combinations. Actuation is direct-mounted double-acting or spring-return cylinder (Model 51/52/53).
Key Features
These features explain why the Masoneilan 74000 is chosen for the most erosive refinery letdown duties:
- Streamlined inner body contours maximize throat efficiency and avoid pockets that cause flow reversal and eddy currents.
- Tungsten carbide on moving trim components and ceramics on stationary components provide high hardness on critical surfaces.
- A sacrificial ceramic venturi and body-retained seat ring protect the body from the flow jet.
- A fluted plug with top and bottom guiding adds stability and resistance to vibration, with a bull-nose plug as the top-guided alternative.
- A flushing or purge connection is available to prevent coking and to clear solids from the upper body cavity.
- A 347 stainless steel body with Inconel 718 trim is specified for high-temperature, high-pressure hydrocarbon service.
- ASME Class 600 and Class 2500 ratings with flanged or hub connections suit high-pressure letdown.
- Full and reduced capacity trims with a 50:1 Cv ratio provide a wide control range.
Industrial Applications
Baker Hughes lists resid hydroprocessing, residual hydrocracking, heavy oil letdown and two-phase erosive service as the key applications of the Masoneilan 74000, all in the refining industry. In these units, hydrocarbon at high pressure carries catalyst fines and coke and flashes as the pressure falls, so a conventional trim is destroyed in a short time; the combination of ceramic and tungsten carbide trim, an integral expanded outlet and flushing capability is aimed at extending campaign length. For Oman, the relevance is to hydrocracker and residue-upgrading projects at the major refining sites and to blowdown or dropout service in high-pressure units.
In Oman and the GCC, Seven Star LLC distributes the Masoneilan 74000 Series to EPC contractors, licensors and refinery operators throughout Oman and the GCC, including industrial projects in the Sohar and Salalah economic zones. We also supply Type 51/52/53 piston actuators, the related Masoneilan 41005 cage-guided control valve for less erosive duty, and the BR200 volume booster relay for actuator accessories.
Technical Specifications
The table below summarizes the data published for the Masoneilan 74000 in the Baker Hughes Masoneilan technical specification (Rev. D, July 2024). The Baker Hughes product page quotes a broader pressure-class range, so the rating for a given order is confirmed with the factory.
| Parameter | Specification |
|---|---|
| Model | Masoneilan 74000 Series erosion-resistant angle control valve (heavy oil valve) |
| Body type | Angle body, two-piece, integral bonnet |
| Sizes | 1 to 12 in (DN 25 to 300) with expanded outlets |
| Ratings | ASME Class 600 and Class 2500 |
| End connections | Flanged or hub (RF/RTJ in Class 600; hub/RTJ in Class 2500) |
| Body material | 347 stainless steel |
| Trim materials | Inconel 718, ceramic and tungsten carbide |
| Plug type | Bull nose (top guided); fluted (top and bottom guided) |
| Flow direction | Flow-to-close |
| Flow characteristic | Modified linear; Cv ratio 50:1 |
| Seat leakage | Class IV standard |
| Actuation | Direct-mount double-acting or spring-return cylinder (51/52/53) |
Related Masoneilan erosion-resistant valves include the Masoneilan 71000 Series streamlined angle valve, Masoneilan 73000 Series sweep angle valve and Masoneilan 75000 Series tank drain valve.
Request a Quote for Masoneilan 74000
Refining and EPC teams in Oman and across the GCC can submit a formal RFQ to Seven Star LLC for the Masoneilan 74000 Series, with size, class, trim type, flushing provisions and actuator confirmed against the process data. We coordinate with Baker Hughes on configuration and lead time, and provide the technical specification for download from this page. In Oman and the GCC, Seven Star LLC supplies every valve with manufacturer documentation and local technical support.
Datasheets & Documents
- Datasheet Masoneilan 74000 Series Technical Specifications Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Masoneilan is a control valve brand of Baker Hughes with roots going back to 1882. Its Camflex eccentric plug rotary valve, 21000 series globe valve and SVI digital positioners are fixtures in refineries, gas plants and power stations. Every valve carries a serial number and a long model number that define the actuator, body and trim.
Seven Star LLC is an independent supplier listing Masoneilan control valves, actuators, regulators, positioners and level instruments for buyers in Oman and the GCC. We source complete valves as well as Masoneilan spare parts against that nameplate data.
Masoneilan at a glance
| Origin | Mason Regulator Company, Boston area, USA (1882). It acquired the Neilan Company of California in 1931, and the two names became Masoneilan. |
|---|---|
| Ownership | Dresser Industries from 1985, then GE Oil & Gas, now Baker Hughes |
| Milestones the company cites | Cv flow coefficient introduced (1944), spring-diaphragm actuators (1955), Camflex rotary globe valve (1968), Lo-dB low-noise trim (1975), LincolnLog axial-flow letdown valve (1982), Varipak (1984), V-Log (1998), SteamForm steam conditioning valve (2002) |
| Product families | Globe, rotary, butterfly and severe-service control valves, actuators, digital positioners, self-operated regulators and displacer level instruments |
| Typical duty | Throttling control of steam, gas, hydrocarbons and water, high-pressure letdown, anti-cavitation and low-noise service |
Masoneilan control valves and actuator series
| Series | Type | Typical use |
|---|---|---|
| 21000, 21009 | Top-guided and cage-guided globe valves | General process control. Cryogenic (21000 C), bellows seal (21000 BS) and API 6A versions are also made |
| 41005 | Cage-guided globe valve | Higher pressure drop and larger sizes, up to 30-36 inch extended sizes; VRT anti-cavitation and API 6A versions |
| 35002 Camflex II | Eccentric plug rotary control valve | Erosive, flashing and dirty service; HC high capacity, DVD low noise and GR globe replacement versions |
| 37002 MiniTork II, 39003/39005, 33000 | Butterfly control valves, high-performance and triple-offset | Large flows at low pressure drop, and tight-shutoff duty |
| 28000 Varipak | Microflow control valve | Very small flows, with adjustable Cv |
| 78400/18400 LincolnLog, 77000, 49000 V-Log | Severe-service multi-stage valves | High-pressure liquid letdown, anti-cavitation and gas noise reduction |
| 84000/84003 SteamForm, DSH | Steam conditioning valves and desuperheaters | Turbine bypass and steam pressure and temperature reduction |
| 87/88, 37/38, 51/52/53 | Spring-diaphragm and piston actuators | Linear and rotary valve actuation; diaphragms and soft-goods kits are listed separately |
| SVI3, SVI II AP, SVi1000, SVI FF | Digital valve positioners | HART or FOUNDATION Fieldbus positioning with valve diagnostics; the SVI II ESD adds partial stroke testing |
| 4700/4800, 8013 | Pneumatic and electro-pneumatic positioners | Older installed base. Many sites move to SVI positioners at overhaul |
| 525/526, 535/536, 171-174 | Self-operated pressure regulators | Pressure reducing and back-pressure control without external power |
| 12400, 12800 | Displacer level transmitters and controllers | Digital (12400, HART, SIL 2 version 12420) and pneumatic (12800) level control on separators and vessels |
Where Masoneilan valves are used
Throttling duty on steam, hydrocarbons, gas and water is the daily work of these valves. Typical services are feedwater and steam conditioning in power plants, separator and compressor loops in gas processing, high-pressure-drop letdown, cryogenic service in LNG and air separation, and general flow, pressure and level control in refineries and chemical plants.
Ordering Masoneilan valves and spare parts: what we need
For spare parts the serial number decides the order, because the factory record behind it lists the trim, materials and actuator. Send a clear nameplate photo with the serial number, model number, size and pressure class. For a new valve, add the process data: fluid, inlet and outlet pressure, temperature, minimum, normal and maximum flow, required leakage class, fail position, air supply and control signal. When an older positioner or valve series is no longer made, we quote the successor that Baker Hughes names and list the mounting kit it needs.
Frequently requested Masoneilan models: Masoneilan 4700E/4800E Electropneumatic Valve Positioner, Masoneilan 28000 Series VariPak Valve Seal & O-Ring Kit, Masoneilan 535H Single-Seat Pressure Reducing Regulator.
Facts checked against Baker Hughes Masoneilan product information and the company's published timeline, October 2026.
Browse Masoneilan products by category: Control Valves, Valve Actuator, Regulators, Valve Positioner, Level Transmitter.
FAQ
Questions about the Masoneilan 74000 Series Heavy Oil Erosion-Resistant
Answers from our engineering team on installation, compatibility and integration.
01What is the Masoneilan 74000 designed for?
The Masoneilan 74000 is an erosion-resistant angle valve for severe hydrocarbon service, in particular resid hydroprocessing, residual hydrocracking and heavy oil letdown, where high temperature, high pressure drop, coking, erosive solids and flashing occur together.
02How does the Masoneilan 74000 resist erosion?
Its inner body contours are streamlined, the moving trim components use tungsten carbide and the stationary components use ceramics, and a sacrificial ceramic venturi protects the body. A flushing or purge connection helps prevent coking and clears solids from the upper cavity.
03What is the difference between the fluted and bull-nose plug?
The bull-nose plug is top guided, while the fluted plug, based on axial flow technology, is guided at both top and bottom for added stability and vibration resistance. Rated Cv values differ between the two, and the choice is made during sizing.
04Which sizes, ratings and actuators apply to the Masoneilan 74000?
The technical specification lists 1 to 12 inch sizes with expanded outlets, ASME Class 600 and Class 2500, a 347 stainless steel body and direct-mount double-acting or spring-return cylinder actuators. The product page quotes a broader class range, so we confirm the rating for each order.
05Is Seven Star LLC a trusted supplier for Masoneilan products?
Yes. Seven Star LLC supplies Masoneilan products to customers in Oman and the GCC and can provide the manufacturer documentation and technical support on request.


















Reviews
There are no reviews yet.