- Automation & ControlView all 2,470 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Masoneilan
Masoneilan 41005 Series Cage-Guided Valve Seal & Packing Kit
Description
Overview
The Masoneilan 41005 Series is Baker Hughes’ heavy-duty, cage-guided globe control valve, one of the most broadly specified platforms across Middle East refining and gas processing because its cage-based trim can be configured for standard throttling, Lo-dB anti-cavitation service, or high-capacity flow with a simple cage change rather than a new body casting. Every one of those trim variants shares the same three renewable containment systems – the spiral-wound body/bonnet and cage gaskets, the stem seal rings fitted around the cage, and the packing set in the packing box – and it is these soft goods, not the cage or the forged body, that determine how long a Masoneilan 41005 Series valve runs leak-free between turnarounds. Because seal ring material (graphite, PTFE, elastomer, or metallic) and packing type vary with the specific trim and service temperature, Baker Hughes engineers each rebuild kit against the confirmed valve configuration rather than a single stocked part number.
With fast quotation turnaround and technical support, Seven Star LLC proudly supplies this Masoneilan 41005 Series cage-guided valve seal and packing kit to refineries, gas plants, and petrochemical complexes across Oman and the wider GCC. Seven Star LLC’s instrumentation division confirms the cage trim type, seal ring material, and packing selection against the customer’s nameplate before every order, ensuring the spiral-wound gaskets, seal rings, and packing all arrive matched to the actual installed valve.
Operating Principle
The Masoneilan 41005 Series throttles flow by lifting a plug through a fixed cage that both guides the plug and shapes the flow characteristic, and the cage-to-body joint depends on seal rings – designated 11A, 11C, or 11E depending on material – to prevent process fluid from bypassing the cage rather than passing through its intended flow ports. These seal rings compression-set and lose resilience under repeated thermal cycling exactly as any soft seal does, and once that happens flow begins to bypass the cage’s designed flow characteristic, degrading control performance well before the cage itself shows measurable wear. Above the cage, the stem packing box uses the same family of systems found across Masoneilan’s globe platforms – braided PTFE with a carbon or aramid core in skive-cut form for replacement without stem separation, flexible graphite for higher-temperature service, or live-loaded Low-E packing for fugitive-emission compliance – with the high-temperature 41375 variant adding a VRT (stack) configuration to manage thermal growth across the packing box.
Between body and bonnet, and again at the cage retainer, spiral-wound gaskets (identified as items 10, 14, and 36 in the manufacturer’s manual) close the pressure-containing joints and must always be replaced after disassembly, since a gasket that has already taken a compression set will not reseal reliably when the bonnet or cage retainer is re-torqued. Rebuilding a Masoneilan 41005 Series valve with a correctly matched seal ring and gasket set restores both the flow-characteristic integrity of the cage trim and the external containment of the bonnet joint in a single scheduled outage.
Engineering Design of the Masoneilan 41005 Series
The Masoneilan 41005 Series is available in carbon steel, stainless steel, and high-pressure alloy construction (A217 Gr WC6, WC9, or C12A) across an unusually wide size range of 2 to 36 inches, with pressure ratings spanning ASME 300 through 2500 pound classes and API 6A variants extending to 10,000 and 15,000 psi for wellhead applications. The cage-guided trim architecture allows standard linear or equal-percentage cages, single- or multi-stage Lo-dB anti-cavitation cages, and high-capacity cages to be fitted into the same body casting, which is precisely why the correct seal ring material and packing selection depend on the specific cage configuration installed rather than the body size alone.
Seven Star LLC packages the Masoneilan 41005 Series seal kit to the customer’s confirmed cage trim, seal ring material, and packing type, supplying the spiral-wound gaskets, cage seal rings, and packing rings as one traceable, size-matched set, so plant maintenance teams can complete a full cage and stem-seal rebuild during a scheduled outage without discovering a mismatched component mid-job.
Key Features
This Masoneilan 41005 Series kit is engineered to restore full containment on an in-service cage-guided globe valve. Key features include:
- Spiral-wound body/bonnet and cage retainer gaskets engineered to the confirmed configuration of the customer’s Masoneilan 41005 Series valve.
- Cage seal rings supplied in graphite, PTFE, elastomer, or metallic construction to match the original trim specification.
- Choice of braided PTFE, flexible graphite, or live-loaded Low-E stem packing, matched to service temperature.
- VRT (stack) packing configuration available for the high-temperature 41375 variant.
- Compatible with standard, single- and multi-stage Lo-dB anti-cavitation, and high-capacity cage trims.
- Covers the full 2–36 inch size range across ASME 300–2500 and API 6A 10K/15K pressure classes.
- Kit contents cross-checked against the current Baker Hughes 41005 Series instruction manual before dispatch.
- Supplied with reassembly guidance covering cage seal ring orientation and gasket torque sequence.
Industrial Applications
The Masoneilan 41005 Series is one of the most widely installed cage-guided valves across Middle East refining, gas processing, and petrochemical plants, used everywhere from general process throttling to anti-cavitation letdown and high-capacity flow control on the same standardized body platform. Facilities around Muscat, Sohar, and the Salalah free zone rely on scheduled Masoneilan 41005 Series cage and seal ring rebuilds during turnarounds, particularly on Lo-dB trims in cavitation-prone letdown service where a degraded seal ring allows bypass flow that both erodes downstream piping and defeats the noise-reduction purpose of the cage.
With engineering support in Muscat, Seven Star LLC supplies this Masoneilan 41005 Series seal kit to reliability and instrumentation teams across the Sultanate of Oman and the broader GCC, supporting refining, gas processing, and petrochemical facilities that standardized on this platform for its trim flexibility. Seven Star LLC’s technical support with selection lets plant engineers plan a 41005 Series rebuild into a shutdown window with confidence that the cage seal ring material and packing type supplied match the valve’s actual configuration.
Technical Specifications
Representative build data for the Masoneilan 41005 Series platform this kit is engineered to match:
| Parameter | Specification |
|---|---|
| Model | Masoneilan 41005 Series |
| Valve Type | Cage-guided globe control valve |
| Sizes Covered | 2–36 inch |
| Pressure Classes | ASME 300–2500; API 6A 10K/15K variants |
| Standard Packing | Braided PTFE, carbon or aramid core, skive-cut |
| Alternate Packing | Flexible graphite; live-loaded Low-E; VRT stack (41375) |
| Cage Seal Ring Materials | Graphite, PTFE, elastomer, or metallic |
| Body Materials Supported | Carbon steel, stainless steel, A217 Gr WC6/WC9/C12A |
| Body/Bonnet Seal | Spiral wound gaskets, replaced at every disassembly |
Request a Quote for Masoneilan 41005 Series Cage-Guided Valve Seal & Packing Kit
Seven Star LLC invites facility engineers, procurement leads, and maintenance planners across Oman and the GCC to submit a formal RFQ for the Masoneilan 41005 Series cage-guided valve seal and packing kit with the valve’s confirmed cage trim, seal ring material, and packing type, so the correct kit is engineered without guesswork. Seven Star LLC supplies common 41005 Series soft-good variants on request, can furnish the current Baker Hughes technical datasheet on request, and can connect customers with its instrumentation division for turnaround planning.
Browse the full Masoneilan range or see more Control Valves products supplied by Seven Star LLC in Oman and the GCC.
Datasheets & Documents
- Datasheet Masoneilan 41005 Series Cage-Guided Valve Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Masoneilan is a control valve brand of Baker Hughes with roots going back to 1882. Its Camflex eccentric plug rotary valve, 21000 series globe valve and SVI digital positioners are fixtures in refineries, gas plants and power stations. Every valve carries a serial number and a long model number that define the actuator, body and trim.
Seven Star LLC is an independent supplier listing Masoneilan control valves, actuators, regulators, positioners and level instruments for buyers in Oman and the GCC. We source complete valves as well as Masoneilan spare parts against that nameplate data.
Masoneilan at a glance
| Origin | Mason Regulator Company, Boston area, USA (1882). It acquired the Neilan Company of California in 1931, and the two names became Masoneilan. |
|---|---|
| Ownership | Dresser Industries from 1985, then GE Oil & Gas, now Baker Hughes |
| Milestones the company cites | Cv flow coefficient introduced (1944), spring-diaphragm actuators (1955), Camflex rotary globe valve (1968), Lo-dB low-noise trim (1975), LincolnLog axial-flow letdown valve (1982), Varipak (1984), V-Log (1998), SteamForm steam conditioning valve (2002) |
| Product families | Globe, rotary, butterfly and severe-service control valves, actuators, digital positioners, self-operated regulators and displacer level instruments |
| Typical duty | Throttling control of steam, gas, hydrocarbons and water, high-pressure letdown, anti-cavitation and low-noise service |
Masoneilan control valves and actuator series
| Series | Type | Typical use |
|---|---|---|
| 21000, 21009 | Top-guided and cage-guided globe valves | General process control. Cryogenic (21000 C), bellows seal (21000 BS) and API 6A versions are also made |
| 41005 | Cage-guided globe valve | Higher pressure drop and larger sizes, up to 30-36 inch extended sizes; VRT anti-cavitation and API 6A versions |
| 35002 Camflex II | Eccentric plug rotary control valve | Erosive, flashing and dirty service; HC high capacity, DVD low noise and GR globe replacement versions |
| 37002 MiniTork II, 39003/39005, 33000 | Butterfly control valves, high-performance and triple-offset | Large flows at low pressure drop, and tight-shutoff duty |
| 28000 Varipak | Microflow control valve | Very small flows, with adjustable Cv |
| 78400/18400 LincolnLog, 77000, 49000 V-Log | Severe-service multi-stage valves | High-pressure liquid letdown, anti-cavitation and gas noise reduction |
| 84000/84003 SteamForm, DSH | Steam conditioning valves and desuperheaters | Turbine bypass and steam pressure and temperature reduction |
| 87/88, 37/38, 51/52/53 | Spring-diaphragm and piston actuators | Linear and rotary valve actuation; diaphragms and soft-goods kits are listed separately |
| SVI3, SVI II AP, SVi1000, SVI FF | Digital valve positioners | HART or FOUNDATION Fieldbus positioning with valve diagnostics; the SVI II ESD adds partial stroke testing |
| 4700/4800, 8013 | Pneumatic and electro-pneumatic positioners | Older installed base. Many sites move to SVI positioners at overhaul |
| 525/526, 535/536, 171-174 | Self-operated pressure regulators | Pressure reducing and back-pressure control without external power |
| 12400, 12800 | Displacer level transmitters and controllers | Digital (12400, HART, SIL 2 version 12420) and pneumatic (12800) level control on separators and vessels |
Where Masoneilan valves are used
Throttling duty on steam, hydrocarbons, gas and water is the daily work of these valves. Typical services are feedwater and steam conditioning in power plants, separator and compressor loops in gas processing, high-pressure-drop letdown, cryogenic service in LNG and air separation, and general flow, pressure and level control in refineries and chemical plants.
Ordering Masoneilan valves and spare parts: what we need
For spare parts the serial number decides the order, because the factory record behind it lists the trim, materials and actuator. Send a clear nameplate photo with the serial number, model number, size and pressure class. For a new valve, add the process data: fluid, inlet and outlet pressure, temperature, minimum, normal and maximum flow, required leakage class, fail position, air supply and control signal. When an older positioner or valve series is no longer made, we quote the successor that Baker Hughes names and list the mounting kit it needs.
Frequently requested Masoneilan models: Masoneilan 4700E/4800E Electropneumatic Valve Positioner, Masoneilan 28000 Series VariPak Valve Seal & O-Ring Kit, Masoneilan 535H Single-Seat Pressure Reducing Regulator.
Facts checked against Baker Hughes Masoneilan product information and the company's published timeline, October 2026.
Browse Masoneilan products by category: Control Valves, Valve Actuator, Regulators, Valve Positioner, Level Transmitter.
FAQ
Questions about the Masoneilan 41005 Series Cage-Guided Valve Seal &
Answers from our engineering team on installation, compatibility and integration.
01Is there one fixed part number for the 41005 Series seal kit?
No. The gasket, cage seal ring, and packing content is engineered against the confirmed cage trim, seal ring material, and packing selection, so Seven Star LLC verifies nameplate data before quoting.
02What cage seal ring materials are available for the Masoneilan 41005 Series?
Graphite, PTFE, elastomer, or metallic seal rings, designated 11A, 11C, or 11E in the manufacturer manual depending on the trim and service conditions.
03What packing options are available for the Masoneilan 41005 Series?
Braided PTFE with a carbon or aramid core, flexible graphite for higher temperatures, live-loaded Low-E for fugitive-emission compliance, and a VRT stack configuration for the high-temperature 41375 variant.
04Does this kit cover the Lo-dB and high-capacity cage trims?
Yes, once the specific cage trim is confirmed, since standard, single- and multi-stage Lo-dB, and high-capacity cages all fit the same 41005 Series body but use different seal ring configurations.
05Is Seven Star LLC an experienced supply partner for Masoneilan products?
Yes. Seven Star LLC is an experienced supplier of Masoneilan in Oman and the GCC, supplying genuine seal kits, spares, and valves with part-number traceability.


















Reviews
There are no reviews yet.