Brand:

Masoneilan Lo-dB Cartridge 16-Stage Noise Reduction Device

Description

Overview

The Masoneilan Lo-dB Cartridge is a downstream noise-control device that Baker Hughes supplies for gas, steam and vapor letdown where a control valve alone cannot meet the sound pressure limit. Regulators and plant owners increasingly ask for 85 to 90 dBA measured one meter from the noise source, and when the pressure drop across a valve exceeds the critical limit, the usual remedy is a device that creates back pressure and adds a further stage of pressure reduction. The Masoneilan Lo-dB Cartridge does this as a compact, line-mounted element rather than as a large and costly silencer, and it normally means the control valve itself does not have to be upsized.

Seven Star LLC, a trusted supplier of Masoneilan products, supplies the Masoneilan Lo-dB Cartridge to refineries, gas plants and power stations in Oman and the GCC, where steam letdown and vent duties are frequent. Our instrumentation division in Muscat can review a valve noise calculation and propose a cartridge size and capacity factor.

16-Stage Principle of Operation

Baker Hughes describes the Masoneilan Lo-dB Cartridge as a static device that produces a pressure drop in gas or vapor applications where a high pressure reduction is required. Inside the housing, a multi-stage element forces the flow through a progressive pressure reduction along a tortuous path of 16 stages. Through this staging the flow is also divided into many interconnected passages, which creates microturbulent flow and holds both the mean velocity and the discrete point velocities below a target threshold. Because the element is assembled from uniform components oriented in a composite structure, its flow coefficient is well defined and reproducible.

The cartridge is sized so that the pressure drop across the valve becomes subcritical. Since this has little effect on the capacity of the valve and a very large effect on noise, the valve usually keeps its original size. Sizing the Masoneilan Lo-dB Cartridge follows the same Cv-based approach used for valves, and proper application in general requires a pressure ratio of at least 4 to 1. In a closed system the Masoneilan Lo-dB Cartridge is normally close coupled to the valve outlet, and single or multiple cartridges are used with standard or low-noise valves depending on the degree of reduction required.

Engineering Design of the Masoneilan Lo-dB Cartridge

The exterior housing of the Masoneilan Lo-dB Cartridge is carbon or stainless steel, machined to accept the internal components, which are compressed and held in place by welding a retainer ring to the housing. The same construction applies to flanged and butt-weld versions. The multi-stage element is a stack of resistance-welded 304 stainless steel grilles, with adjacent grilles oriented in a controlled way to maintain flow characteristics, and the positioning of adjacent grilles with respect to each other provides the required noise reduction. A support grate of interlocked 304 stainless steel bars carries the element, and double support grates are available for increased pressure drops.

Reduced capacity cartridges add a 304 stainless steel reducer ring between the multi-stage element and the retainer ring, which gives capacity factors of 0.9, 0.8 and 0.7 of the full rating. Flange-mounted units are wafer style between ASME Class 150 to 2500 flanges, with the outside diameter of the housing matching the raised-face diameter of the pipe flange. Large cartridges are supplied with an eye bolt for handling. Flow is uni-directional, indicated by an external arrow on the serial plate, and the support grate must sit on the downstream side.

Key Features

The following features, taken from the Baker Hughes technical specification, show where the Masoneilan Lo-dB Cartridge fits in high-ratio gas and steam letdown:

  • The Masoneilan Lo-dB Cartridge uses a 16-stage tortuous flow path that reduces pressure progressively and controls both mean and point velocities in the fluid.
  • Noise and related vibration are reduced at source rather than muffled afterwards, so no oversized silencer shell is required.
  • Uniform resistance-welded 304 stainless steel grilles give a well-defined, reproducible flow coefficient for sizing.
  • The rated Cv range of 15 to 5900 covers pipe sizes from 2 to 36 inch, with reduced capacity options for a closer match to the valve.
  • Multiple units of the Masoneilan Lo-dB Cartridge can be installed in series for a larger reduction, and a cartridge can also be used at the outlet of a vented system.
  • Passages are sized so that normal foreign material in process piping passes through, although the line must be clean at start-up.
  • Housings in carbon steel up to 650 degrees Fahrenheit and 304 stainless steel up to 750 degrees Fahrenheit suit steam and hot gas duty.
  • Wafer mounting between flanges and butt-weld ends in the larger sizes allow retrofit to existing piping.

Industrial Applications

The principal application of the Masoneilan Lo-dB Cartridge is the control of noise when a gas, steam or vapor is dumped to a lower pressure. Duties named in the technical specification include dumping gas or steam into a low pressure system and open vent applications. Baker Hughes notes that many open vent applications otherwise need large valve outlets and large downstream piping to limit velocity, and that a cartridge at the vent outlet or somewhere downstream can reduce both the valve size and the pipe size between the valve and the cartridge. Used together with a vent silencer, it can lower the cost of the overall system.

Seven Star LLC also distributes valves of the kind the Masoneilan Lo-dB Cartridge is installed downstream of, for example the Masoneilan 41005 Series cage guided control valve. The technical specification allows the cartridge to be used with standard or low-noise valves, and positioning and actuation can be added from the Masoneilan SVI3 digital valve positioner and the Masoneilan Type 87/88 actuators.

Technical Specifications

The table lists the data published for the Masoneilan Lo-dB Cartridge in the Baker Hughes technical specification (Rev. C, 01/2025). Dimensions, capacity limitations on heavier pipe schedules and the pressure drop versus temperature chart are in the full document.

Parameter Specification
Model Masoneilan Lo-dB Cartridge
Principle Static device, progressive pressure reduction through a 16-stage tortuous path
Nominal sizes 2, 3, 4, 6, 8, 10, 12, 16, 20, 24, 30 and 36 inch (DN 50 to 900)
Rated Cv (full capacity) 21 at 2 in, 195 at 6 in, 780 at 12 in, 5900 at 36 in; overall range 15 to 5900
Capacity factors Full, 0.9, 0.8 and 0.7 (reduced capacity with reducer ring)
Flow direction Uni-directional, per flow arrow
Fluid temperature Minus 20 to 750 °F (minus 29 to 399 °C)
Connections Wafer between flanges, 2 to 36 in; butt-weld ends available from 16 to 36 in
Element materials 304 stainless steel multi-stage element, grate and retainer ring
Housing (flange mounted) ASTM A515 Gr 70 carbon steel to 650 °F; ASTM A240 Type 304 to 750 °F
Flange mounted dimensions Dimension A of 3.6 in (91 mm) at 2 in and 40.2 in (1021 mm) at 36 in; dimension B of 4.0 to 7.2 in (102 to 183 mm)
Typical application ratio Pressure ratio of at least 4 to 1

Related Masoneilan noise-control and severe-service valves include the Masoneilan 21000 Series top-guided globe control valve and Masoneilan 77000 Series multi-stage high-pressure valve.

Request a Quote for Masoneilan Lo-dB Cartridge

A request for quotation for the Masoneilan Lo-dB Cartridge should state the fluid, flow rate, inlet and outlet pressure, temperature, line size and schedule, and the sound pressure level to be met. Seven Star LLC in Muscat then confirms the cartridge size and capacity factor, checks availability and lead time and supplies the Baker Hughes technical specification for download from this page. With trusted supplier status for Masoneilan in Oman and the GCC, every delivery comes with manufacturer documentation and local support.

Datasheets & Documents
  • PDF Datasheet Masoneilan Lo-dB Cartridges and Expansion Plates Technical Specifications (Rev. C, 01/2025) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Masoneilan is a control valve brand of Baker Hughes with roots going back to 1882. Its Camflex eccentric plug rotary valve, 21000 series globe valve and SVI digital positioners are fixtures in refineries, gas plants and power stations. Every valve carries a serial number and a long model number that define the actuator, body and trim.

Seven Star LLC is an independent supplier listing Masoneilan control valves, actuators, regulators, positioners and level instruments for buyers in Oman and the GCC. We source complete valves as well as Masoneilan spare parts against that nameplate data.

Masoneilan at a glance

Origin Mason Regulator Company, Boston area, USA (1882). It acquired the Neilan Company of California in 1931, and the two names became Masoneilan.
Ownership Dresser Industries from 1985, then GE Oil & Gas, now Baker Hughes
Milestones the company cites Cv flow coefficient introduced (1944), spring-diaphragm actuators (1955), Camflex rotary globe valve (1968), Lo-dB low-noise trim (1975), LincolnLog axial-flow letdown valve (1982), Varipak (1984), V-Log (1998), SteamForm steam conditioning valve (2002)
Product families Globe, rotary, butterfly and severe-service control valves, actuators, digital positioners, self-operated regulators and displacer level instruments
Typical duty Throttling control of steam, gas, hydrocarbons and water, high-pressure letdown, anti-cavitation and low-noise service

Masoneilan control valves and actuator series

Series Type Typical use
21000, 21009 Top-guided and cage-guided globe valves General process control. Cryogenic (21000 C), bellows seal (21000 BS) and API 6A versions are also made
41005 Cage-guided globe valve Higher pressure drop and larger sizes, up to 30-36 inch extended sizes; VRT anti-cavitation and API 6A versions
35002 Camflex II Eccentric plug rotary control valve Erosive, flashing and dirty service; HC high capacity, DVD low noise and GR globe replacement versions
37002 MiniTork II, 39003/39005, 33000 Butterfly control valves, high-performance and triple-offset Large flows at low pressure drop, and tight-shutoff duty
28000 Varipak Microflow control valve Very small flows, with adjustable Cv
78400/18400 LincolnLog, 77000, 49000 V-Log Severe-service multi-stage valves High-pressure liquid letdown, anti-cavitation and gas noise reduction
84000/84003 SteamForm, DSH Steam conditioning valves and desuperheaters Turbine bypass and steam pressure and temperature reduction
87/88, 37/38, 51/52/53 Spring-diaphragm and piston actuators Linear and rotary valve actuation; diaphragms and soft-goods kits are listed separately
SVI3, SVI II AP, SVi1000, SVI FF Digital valve positioners HART or FOUNDATION Fieldbus positioning with valve diagnostics; the SVI II ESD adds partial stroke testing
4700/4800, 8013 Pneumatic and electro-pneumatic positioners Older installed base. Many sites move to SVI positioners at overhaul
525/526, 535/536, 171-174 Self-operated pressure regulators Pressure reducing and back-pressure control without external power
12400, 12800 Displacer level transmitters and controllers Digital (12400, HART, SIL 2 version 12420) and pneumatic (12800) level control on separators and vessels

Where Masoneilan valves are used

Throttling duty on steam, hydrocarbons, gas and water is the daily work of these valves. Typical services are feedwater and steam conditioning in power plants, separator and compressor loops in gas processing, high-pressure-drop letdown, cryogenic service in LNG and air separation, and general flow, pressure and level control in refineries and chemical plants.

Ordering Masoneilan valves and spare parts: what we need

For spare parts the serial number decides the order, because the factory record behind it lists the trim, materials and actuator. Send a clear nameplate photo with the serial number, model number, size and pressure class. For a new valve, add the process data: fluid, inlet and outlet pressure, temperature, minimum, normal and maximum flow, required leakage class, fail position, air supply and control signal. When an older positioner or valve series is no longer made, we quote the successor that Baker Hughes names and list the mounting kit it needs.

Frequently requested Masoneilan models: Masoneilan 4700E/4800E Electropneumatic Valve Positioner, Masoneilan 28000 Series VariPak Valve Seal & O-Ring Kit, Masoneilan 535H Single-Seat Pressure Reducing Regulator.

Facts checked against Baker Hughes Masoneilan product information and the company's published timeline, October 2026.

FAQ

Questions about the Masoneilan Lo-dB Cartridge 16-Stage Noise Reduction

Answers from our engineering team on installation, compatibility and integration.

01How does the Masoneilan Lo-dB Cartridge reduce valve noise?
The Masoneilan Lo-dB Cartridge is a static device that adds a further pressure drop downstream of the control valve through a tortuous 16-stage path. The flow is divided into many interconnected passages that produce microturbulent flow and keep both mean and point velocities below a target threshold. Baker Hughes states that it is sized to make the valve pressure drop subcritical, which greatly reduces noise while having little effect on valve capacity.
02When should a Lo-dB cartridge be specified?
Baker Hughes recommends Lo-dB cartridges and plates with Lo-dB valves such as the Series 21000, 41005 or 77000 when the pressure ratio is higher than 4, or with standard valves when their sound pressure level needs a reduction of 20 dBA or more. Proper application in general needs a pressure ratio of at least 4 to 1, and the targets quoted for plant noise are 85 to 90 dBA at one meter.
03What sizes and temperatures does the Masoneilan Lo-dB Cartridge cover?
The technical specification lists nominal sizes from 2 to 36 inch (DN 50 to 900), wafer-mounted between flanges, with butt-weld ends available from 16 to 36 inch. Rated Cv runs from 15 to 5900, the fluid temperature range is minus 20 to 750 degrees Fahrenheit (minus 29 to 399 degrees Celsius), and the housing is carbon steel up to 650 degrees Fahrenheit or 304 stainless steel up to 750 degrees Fahrenheit.
04Where must the Masoneilan Lo-dB Cartridge be installed?
It is always mounted downstream of the control valve, in the direction of the external flow arrow on the serial plate, with the support grate on the downstream side. For the best noise reduction it should be close to, and preferably directly against, the valve outlet; installing it further downstream can save piping cost but is less effective. The line must be clean before start-up because the passages are small.
05Is Seven Star LLC a trusted supplier for Masoneilan products?
Yes. Seven Star LLC is a trusted supplier for Masoneilan products in the Sultanate of Oman and the GCC. We supply the Masoneilan Lo-dB Cartridge with Baker Hughes documentation and can help confirm size, capacity factor and housing material from your valve sizing data.