- Automation & ControlView all 2,314 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Safety Switches & Guard Locking
- Encoders
- Motor Soft Starters
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Fluke
Fluke Ti480 PRO Infrared Camera, 640 x 480, 1000 C
Description
Fluke Ti480 PRO infrared camera, 640 x 480 with MultiSharp Focus and SuperResolution
The Fluke Ti480 PRO is a pistol-grip handheld infrared camera with a 640 x 480 detector (307,200 pixels), a temperature range up to 1,000 °C and a set of focus aids that make it simple to capture sharp thermal images of electrical, mechanical and process equipment. It shares a data sheet with the Ti401 PRO, TiX501 and TiX580. Within that group, the Ti480 PRO is the pistol-grip model with the wider measurement range, SuperResolution, MultiSharp Focus, digital zoom and radiometric video. Seven Star LLC supplies the Ti480 PRO in Oman and the GCC as an independent supplier in Muscat, and this page lists the verified specifications and what to confirm before an RFQ.
Technical specifications of the Ti480 PRO
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Fluke / Ti480 PRO (60 Hz and 9 Hz versions) |
| Infrared resolution | 640 x 480 (307,200 pixels) |
| SuperResolution | Yes, in software: combines 4x the data into a 1280 x 960 image |
| Spatial resolution (IFOV) | 0.93 mrad, D:S 1065:1, standard lens |
| Field of view | 34° horizontal x 24° vertical |
| Minimum focus distance | 15 cm (about 6 in) |
| Thermal sensitivity (NETD) | ≤0.05 °C at 30 °C target temperature (50 mK) |
| Temperature measurement range | -20 … +1,000 °C (not calibrated below -10 °C) |
| Accuracy | ±2 °C or 2 % (at 25 °C nominal, whichever is greater) |
| Spectral band | 7.5 … 14 µm (long wave) |
| Frame rate | 60 Hz or 9 Hz versions |
| Display | 3.5 in landscape touchscreen, 640 x 480 LCD |
| Visible camera | 5 MP built in |
| Digital zoom | 2x and 4x |
| Smart lenses | Macro 25 micron, 2x telephoto, 4x telephoto, wide angle |
| Storage | Removable 4 GB micro SD card plus 4 GB internal flash; USB flash drive saving |
| File formats | bmp, jpeg, is2, is3, AVI |
| Battery | Two field-replaceable lithium-ion packs, 2 … 3 hours each, 2.5 hours to charge |
| Enclosure / drop | IP54 / designed to withstand a 2 m drop with the standard lens |
| Operating temperature | -10 … +50 °C, humidity 10 … 95 % non-condensing |
| Size and weight | 27.7 x 12.2 x 16.7 cm; 1.04 kg with battery |
| Calibration cycle | Two years recommended |
Focus technologies: LaserSharp, MultiSharp and advanced manual focus
A blurred thermal image gives a wrong temperature, so focus is critical. LaserSharp Auto Focus uses a built-in laser distance meter to calculate the distance to the target and focus the lens, and the distance is shown on the screen. MultiSharp Focus is available on the Ti480 PRO (and TiX580): the camera automatically processes a stack of images focused near and far, so a scene with equipment at different distances is in focus throughout the field of view. Advanced manual focus is also provided. The manufacturer lists the Ti401 PRO as having none of the MultiSharp or SuperResolution features, so these are the points that separate the two pistol-grip models.
IR-Fusion, analysis tools and annotations
IR-Fusion blends the visible and infrared images so that the thermal pattern can be located on the actual equipment, and the blend can be adjusted on the camera. Emissivity, reflected background temperature and transmission correction can be set on screen; the camera offers hot and cold spot markers, three user-definable spot markers, up to three measurement boxes with minimum, maximum and average temperature, color alarms and isotherms, a line temperature graph, and auto capture by temperature or interval. Voice annotation of up to 60 seconds, IR-PhotoNotes with up to five images and text annotations support reporting. Radiometric video can be recorded, and MATLAB and LabVIEW tool boxes are listed for R&D use.
Smart lenses and software
The interchangeable Smart Lenses (macro, 2x and 4x telephoto, wide angle) are identified by the camera and, according to the manufacturer, need no calibration. Telephoto lenses help when the target is behind a safety distance, for example on switchyard equipment or a high-level pipe rack, while the macro lens is for small components and circuit boards. Images are analysed in the Fluke Connect desktop software, which the data sheet says is available in all countries, whereas the Fluke Connect app and cloud are not available everywhere, so check availability for the country of use.
Selection and ordering checklist for the Ti480 PRO
- Ti401 PRO, Ti480 PRO, TiX501 or TiX580: Ti480 PRO is a pistol-grip camera with 640 x 480 and a 1,000 °C range.
- Frame rate: 60 Hz or 9 Hz version, depending on export and use rules for the destination.
- Lenses: standard plus telephoto, wide or macro as the inspections require.
- Temperature range: up to 1,000 °C; anything higher needs a different instrument.
- Accessories: spare batteries, charger and a sun shield.
- Calibration certificate, and the recommended two-year calibration cycle.
Inspecting equipment with the Ti480 PRO
Thermal inspection is only valid if the equipment is under normal load. Allow the camera to acclimatise, set emissivity for the surface, compensate for reflections and capture at a viewing angle that avoids glare from shiny parts. Compare similar components under the same load, save images with the asset information, and re-inspect after repairs. Switchgear covers and guarded panels may need to be opened or fitted with infrared windows under site procedure, and the camera is not a replacement for contact voltage detection or lock-out procedures.
Typical applications in Oman and the GCC
Typical jobs include loose or oxidised connections in switchgear, MCCs and transformers, overheated bearings and couplings on pumps, motors and fans, steam trap and heat exchanger checks, refractory and furnace shell scanning, solar plant inspection and roof or insulation surveys. High ambient temperatures and direct sun in the Gulf call for care when interpreting readings, and plant surveys are best done before sunrise or in the shade.
Information to send with an RFQ for the Ti480 PRO
- Model: Ti480 PRO and frame rate (60 Hz or 9 Hz)
- Lenses and accessories
- Typical target distance and temperature
- Calibration certificate requirement
- Quantity and delivery site
Documents and quotation
The Fluke Ti401 PRO, Ti480 PRO, TiX501 and TiX580 technical data sheet is attached on this page. It includes the full comparison table of the four cameras.
Send the model and the application and Seven Star LLC will confirm availability and prepare a quotation.
Datasheets & Documents
- Datasheet Fluke Ti480 PRO Datasheet Download
Reviews (0)
About brand
Fluke is the American maker of handheld electronic test tools: digital multimeters, clamp meters, insulation testers, process calibrators, thermometers, vibration meters and power quality analysers. John Fluke founded the John Fluke Engineering Company in Springdale, Connecticut, in June 1948 and moved it to Seattle in 1952. Fluke is headquartered in Everett, Washington, was acquired by Danaher in 1998 and has been part of Fortive since Fortive's spin-off from Danaher in 2016.
Seven Star LLC lists Fluke process calibrators, electrical test tools and bench calibrators, and sources them for maintenance teams and calibration laboratories in Oman.
Fluke company profile
| Founded | June 1948, Springdale, Connecticut, USA, as the John Fluke Engineering Company |
|---|---|
| Founder | John M. Fluke Sr. |
| Headquarters | Everett, Washington, USA (moved to the Seattle area in 1952) |
| Ownership | Danaher from 1998; part of Fortive (NYSE: FTV) since July 2016 |
| Product families | Digital multimeters and clamp meters, insulation resistance testers, process and loop calibrators, infrared thermometers and thermal imagers, vibration meters, power quality analysers, Fluke Calibration laboratory standards |
Milestones
- 1948: John Fluke starts the company in Springdale, Connecticut.
- 1952: The company moves to Seattle
- 1987: A joint venture with Philips leads to the ScopeMeter handheld oscilloscope.
- 1998: Danaher acquires Fluke.
- 2016: Fluke becomes part of Fortive, spun off from Danaher in July.
Fluke calibrators and test tools listed
The main Fluke products on this page fall into three groups, besides other test tools such as further multimeters, a thermometer, an anemometer, a vibration tester and a portable appliance tester:
- Process tools: the 754 documenting process calibrator with HART, 789 ProcessMeter, 721 dual sensor pressure calibrator and 729 automatic pressure calibrator
- Electrical test: the 376 FC true-RMS clamp meter with iFlex probe and the 1587 FC insulation multimeter
- Fluke Calibration bench standards: 5522A, 5502A, 5500A and 5080A multi-product calibrators, the 5720A multifunction calibrator, 8508A reference multimeter, 6100A electrical power standard and 9640A RF reference source
Several of the bench models belong to earlier generations. When a model is no longer produced, we check the manufacturer's documentation and propose the successor it names.
Where Fluke instruments are used
Fluke process calibrators are used for loop checks, transmitter calibration and valve tests in oil and gas, power and water plants. Clamp meters and insulation testers serve electrical maintenance on motors, switchgear and cables. The bench calibrators and reference multimeters are the working standards of electrical calibration laboratories in the GCC, where they calibrate multimeters, clamp meters, process tools and power analyzers.
Fluke products we list
Ordering Fluke instruments: what we need
Send the exact model with its suffix, since versions differ. A Fluke 721, for example, is defined by its two pressure ranges, and a 729 by its maximum pressure. For bench calibrators, list the options you need, such as oscilloscope calibration or power quality options, the line voltage, and the type of calibration certificate you require from the manufacturer. For Fluke multimeters and clamp meters, add the kit contents wanted, such as probes, leads or cases.
Frequently requested Fluke models: Fluke 5522A Multi-Product Calibrator.
Facts checked against published histories of Fluke Corporation and Fortive, October 2026.
Browse Fluke products by category: Portable Test & Measurement.
FAQ
Questions about the Fluke Ti480 PRO Infrared Camera, 640 x 480, 1000 C
Answers from our engineering team on installation, compatibility and integration.
01What resolution does the Fluke Ti480 PRO have?
The infrared resolution is 640 x 480 (307,200 pixels), and SuperResolution in software combines four times the data into a 1280 x 960 image.
02What is the temperature range?
The camera measures from -20 to +1,000 degrees C, and it is not calibrated below -10 degrees C. Accuracy is plus or minus 2 degrees C or 2 percent.
03What is MultiSharp Focus?
It captures a stack of images focused near and far and combines them, so the whole scene is in focus. It is available on the Ti480 PRO and TiX580.
04What is the enclosure rating?
The enclosure rating is IP54, and the camera is designed to withstand a 2 m drop with the standard lens.
05Which lenses are available?
Smart lenses include macro 25 micron, 2x telephoto, 4x telephoto and wide angle.
Reviews
There are no reviews yet.