- Automation & ControlView all 2,466 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Dräger
Dräger Tube Hydrogen Sulfide 1/d | 8101831, 1-200 ppm
Description
Dräger Tube Hydrogen Sulfide 1/d, order no. 8101831
The Dräger Tube Hydrogen Sulfide 1/d, order number 8101831, is a short-term detector tube for measuring hydrogen sulfide in air with a hand pump. According to the manufacturer’s product table it covers 1 to 200 ppm, requires 1 to 10 strokes and a measurement time of 1 to 10 minutes. Tubes are sold in packs of ten.
Short-term tubes give a direct reading: a fixed volume of air is drawn through the tube, the reagent layer changes colour, and the length of discolouration is read against the scale printed on the tube. The order number identifies this tube type, and the ‘1/d’ part of the name is the manufacturer’s designation for the tube version.
Order no. 8101831 data summary
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Dräger Tube Hydrogen Sulfide 1/d, order no. 8101831 |
| Measured substance | Hydrogen sulfide (H2S) |
| Measuring range | 1 to 200 ppm |
| Number of strokes | 1 to 10 |
| Measurement time | 1 to 10 minutes |
| Pack size | 10 tubes |
| Pump | Dräger-Tube pump accuro (manual) or X-act 5000 (automatic) |
| Further data | See the instructions for use supplied with the tubes: deviation, colour change and cross-sensitivities |
How the 8101831 tube works
Both tube ends are broken open immediately before use, and the tube is inserted into the pump in the direction shown by the arrow. A specified number of pump strokes draws the sample through the reagent. With the accuro pump, the integrated stroke counter helps ensure the correct volume, and the result is read directly from the tube at the end of the measurement.
The measuring range of 1 to 200 ppm is covered with different stroke counts, with the instructions for use giving the number needed for each concentration band. Always follow the instructions supplied in the pack, as the correction factors and reading rules apply only to the exact tube type.
Choosing a pump for the 8101831 tube
The tube is used with the Dräger-Tube pump accuro, which is hand operated, can be used one-handed and is suitable for use in explosive areas as stated by the manufacturer. For automated measurement, the X-act 5000 can be used. Either way, check the pump for leaks and stroke volume at the intervals the manufacturer recommends before relying on readings.
Planning and ordering the 8101831 stock
- Estimate the number of measurements per month and add a margin for repeats.
- Confirm that the 1 to 200 ppm range suits the expected concentrations.
- Check the expiry date printed on the pack on delivery and keep tubes in storage conditions given in the instructions.
- Make sure operators are trained on stroke counts and reading.
- Order the matching pump and spare accessories if you do not already hold them.
Using the 8101831 tube safely and correctly
Stand upwind where possible, sample at the height of the suspected source or breathing zone, and avoid touching the broken glass ends. Take readings promptly and in good light, and record the date, location, temperature, stroke count and result. A tube is single-use. Used tubes should be handled according to site waste rules.
Detector tubes are an indication method. They are well suited to spot checks, confined space entry clearance checks and verification of fixed detector findings, but they do not replace continuous monitoring for personal protection.
Typical applications of the 8101831 tube in Oman and the GCC
Hydrogen sulfide is found in sour gas processing, oil production, refinery units, sewage and wastewater plants, and desalination pretreatment. Safety teams use tubes to verify levels in tanks, sumps and manholes before work permits are issued, and to cross-check fixed or portable electronic detectors. Heat affects tube storage, so keep packs in an air-conditioned store and out of vehicles.
Seven Star LLC supplies Dräger consumables in Oman and the GCC as an independent supplier in Muscat.
Measurement data from the Dräger instructions for use
The Dräger instructions for use for the Hydrogen Sulfide 1/d tube (81 01 831) give two measuring ranges: 10 to 200 ppm with 1 pump stroke (measuring time approx. 1 minute) and 1 to 20 ppm with 10 strokes (approx. 10 minutes). The calibration conditions are 20 °C, 50 % relative humidity and 1013 mbar. The standard deviation is ±15 % over the whole range of ambient conditions, and the indicating layer changes from white to brown.
The reaction principle is H2S + Cu2+ → CuS + 2 H+. The tube is specified for 2 °C to 40 °C and for absolute humidity up to 40 mg/L (100 % r.h. at 35 °C). Away from standard pressure, multiply the reading by the correction factor F = 1013 hPa / actual atmospheric pressure. For unit conversion, 1 ppm H2S = 1.42 mg/m³ at 20 °C and 1013 hPa.
Cross-sensitivities stated by Dräger
According to the same document, 500 ppm HCl, 500 ppm SO2, 500 ppm NH3 or 100 ppm arsine do not interfere with the reading. Methyl mercaptan and ethyl mercaptan turn the whole indicating layer pale yellow; when they are present together with H2S, the reading is extended by approximately 30 %. This matters on sour-gas, refinery and wastewater sites where mercaptans are common, so note any other gases that may be present when you record the result.
Use the tube only with a Dräger tube pump and carry out the pump leak test described in the pump instructions. The measured value applies only to the place and time of measurement. Tubes past their expiry date must not be used, and used tubes should be disposed of according to local rules or returned in the packaging.
Information to send with an RFQ for the 8101831 tube
- Order number 8101831 and the number of packs of ten.
- Whether you also need the pump and accessories.
- Required delivery date and destination.
- Minimum remaining shelf life you accept.
Documents and quotation
Send us order number 8101831 and the quantity and we will confirm the available documents, including the instructions for use, and the delivery position.
Datasheets & Documents
- Instruction Manual Dräger Tube Hydrogen Sulfide 1/d (81 01 831) Instructions for Use Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Drägerwerk is a German maker of safety and medical technology, founded in Lübeck on 1 January 1889 as Dräger & Gerling by Johann Heinrich Dräger and Carl Adolf Gerling. Its first patent was the Lubeca valve, a pressure reducer for carbon dioxide. Drägerwerk AG is listed on the stock exchange but still controlled by the founding family, led by fifth-generation chairman Stefan Dräger.
Seven Star LLC sources and supplies Dräger fixed gas transmitters, flame detectors, portable gas detectors and Dräger-Tubes for sites in Oman, and checks each part number against the manufacturer's documentation.
Dräger company profile
| Founded | 1 January 1889, Lübeck, Germany, as Dräger & Gerling |
|---|---|
| Founders | Johann Heinrich Dräger and Carl Adolf Gerling |
| Headquarters | Lübeck, Germany |
| Ownership | Drägerwerk AG & Co. KGaA, listed in Frankfurt; controlled by the Dräger family |
| Product families | Polytron fixed gas detectors, flame detectors, X-am and Pac portable gas detectors, Dräger-Tubes, breathing apparatus, gas detection controllers; anaesthesia, ventilation and patient monitoring in the medical division |
Milestones
- 1889: Dräger & Gerling is founded in Lübeck; the Lubeca valve is its first patent.
- 1902: Bernhard Dräger joins and the company becomes Drägerwerk Heinr. und Bernh. Dräger.
- 1907: The Pulmotor resuscitator goes into series production.
- 1970: Drägerwerk becomes an Aktiengesellschaft.
Dräger gas detection product families listed here
Fixed detection is covered by the Polytron line: the Polytron 8100 EC for toxic gases and oxygen with electrochemical sensors, the Polytron 8200 CAT for flammable gases with a catalytic sensor, the Polytron 7000 and the PIR 7000 point infrared detector for hydrocarbons. Dräger flame detectors on this page are the Flame 1500 and Flame 2500 (triple infrared) and the Flame 2700 (multi-infrared). Portable instruments include the Pac 8000 single-gas detector, the X-am 2500 for one to four gases and the X-am 8000 for up to seven. Short-term colorimetric tubes such as Hydrogen Sulfide 100/a (CH29101) are listed with the analyzer accessories.
Where Dräger detectors are used
Polytron transmitters and PIR 7000 heads are found on wellhead and gathering facilities, gas plants, refineries, tank farms, LNG and petrochemical units, and in water treatment chlorine rooms. Portable Dräger gas detectors serve confined space entry, hot work permits and personal H2S monitoring, which is routine on sour fields in the GCC. Detector tubes remain a simple spot check where an electronic sensor is not available for the gas.
Dräger products we list
Ordering Dräger equipment: what we need
Dräger identifies most items by a seven-digit part number, such as 8101211, and that number is the most direct route to the right quotation. For a fixed transmitter, add the target gas, measuring range, output (4-20 mA, HART or relays), housing material, cable entry thread and the required hazardous-area approval. For portables, list the sensor configuration, pump or diffusion mode and the charger or calibration accessories needed. For tubes, give the gas and the range printed on the box.
Facts checked against Dräger's own history pages (draeger.com) and published company histories, October 2026.
Browse Dräger products by category: Fire & Gas Detector, Gas Analyzer Accessories.
FAQ
Questions about the Dräger Tube Hydrogen Sulfide 1/d
Answers from our engineering team on installation, compatibility and integration.
01What range does tube 8101831 measure?
1 to 200 ppm of hydrogen sulfide, per the manufacturer's product table.
02How many strokes are needed?
The tube needs 1 to 10 strokes, depending on the concentration band set out in the instructions for use.
03How many tubes are in a pack?
Ten tubes per pack.
04Which pumps can be used?
The Dräger-Tube pump accuro for manual use, or the X-act 5000 for automatic use.
05How long does a measurement take?
The measurement time is 1 to 10 minutes.


















Reviews
There are no reviews yet.