Danfoss MBS 3000 General Purpose Pressure Transmitter
Overview
The Danfoss MBS 3000 is a general-purpose pressure transmitter engineered for reliable pressure measurement across almost every industrial environment, from clean process water systems to harsh marine and offshore installations. Covering measuring ranges from 1 up to 600 bar in gauge and absolute versions, it supports all standard output signals including 4-20 mA, 0-5 V, 1-5 V, 1-6 V, 0-10 V and 1-10 V, and is available with a wide range of pressure and electrical connections to suit OEM and retrofit installations. A fully welded 316L stainless steel enclosure and wetted parts give the MBS 3000 excellent resistance to corrosion, vibration and electromagnetic interference, making it one of the most specified general-purpose transmitters in industrial instrumentation.
With fast quotation turnaround and technical support, Seven Star LLC proudly supplies the Danfoss MBS 3000 pressure transmitter to industrial facilities, contractors, and instrumentation integrators across Oman and the wider GCC. Every unit supplied through Seven Star LLC comes with local technical support, giving plant engineers in Muscat, Sohar, and Salalah a dependable local source for a transmitter series trusted across regional pumping, compressor, and water treatment applications.
Measurement Principle of the Danfoss MBS 3000
The Danfoss MBS 3000 uses a piezoresistive thin-film sensing element bonded to a stainless steel diaphragm to convert applied process pressure into a proportional electrical signal. As process pressure deflects the diaphragm, the strain gauge bridge on the sensing element changes resistance in direct proportion to the applied load; onboard signal-conditioning electronics amplify and linearize this signal into a standard 4-20 mA or voltage output that can be read directly by a PLC, DCS, or local indicator without additional signal conditioning. This solid-state sensing approach used by the Danfoss MBS 3000 has no moving parts, eliminating mechanical wear points that degrade the accuracy of Bourdon-tube or diaphragm-gauge alternatives over repeated pressure cycles.
Accuracy for the Danfoss MBS 3000, measured per EN 60770, reaches ±0.5% of full scale typical and ±1% of full scale maximum, including non-linearity, hysteresis, and repeatability, with a best-fit-straight-line non-linearity of ±0.2% FS. Response time for liquids below 100 cSt viscosity is under 4 milliseconds, and the transmitter withstands overload pressure up to six times full scale (maximum 1500 bar) and burst pressure up to six times full scale (maximum 2000 bar), with a fatigue durability exceeding ten million pressure cycles. The practical result is a pressure transmitter that holds calibrated accuracy through the vibration, thermal cycling, and pressure spikes typical of pump discharge lines, compressor stations, and hydraulic power units.
Engineering Design of the Danfoss MBS 3000
Physically, the Danfoss MBS 3000 is built as a fully welded assembly with enclosure and wetted parts in acid-resistant AISI 316L stainless steel, giving an IP65-rated enclosure that resists dust ingress and directed water jets in outdoor and washdown installations. A companion variant, the MBS 3050, adds an integrated pulse-snubber for applications exposed to cavitation, liquid hammer, and sharp pressure spikes, offering additional protection where reciprocating pumps or fast-closing valves generate transient pressure shocks. A newer IP68 cable-connection version of the Danfoss MBS 3000 extends protection further, tolerating temporary immersion in up to 3 meters of water for as long as 72 hours, suiting underground vaults and periodically flooded pits.
Electrical connection options include standard DIN 43650 plug connectors, cable-gland versions, and integral cable outlets, while pressure connection threads span the common G1/4, G1/2, and 7/16-20 UNF process-connection standards used across European and American piping practice. The compact form factor and broad connection compatibility mean the Danfoss MBS 3000 can typically replace an existing pressure gauge or older transmitter without re-engineering the process tap, simplifying retrofit projects in operating plants where downtime for mechanical rework is costly.
Key Features of the Danfoss MBS 3000
The Danfoss MBS 3000 combines rugged construction with flexible signal options suited to general industrial pressure measurement:
- The Danfoss MBS 3000 covers a wide pressure range from 1 bar up to 600 bar, in both gauge (relative) and absolute versions.
- All standard output signals supported, including 4-20 mA, 0-5 V, 1-5 V, 1-6 V, 0-10 V, and 1-10 V.
- Fully welded acid-resistant AISI 316L stainless steel enclosure and wetted parts for corrosion resistance.
- Accuracy of ±0.5% FS typical per EN 60770, with response time under 4 milliseconds for low-viscosity liquids.
- Overload pressure rated to six times full scale and burst pressure to six times full scale, with over ten million cycle durability.
- MBS 3050 variant adds an integrated pulse-snubber for cavitation and liquid-hammer resistance.
- IP65 standard enclosure rating, with an IP68 cable version rated for temporary submersion up to 3 meters.
- High electromagnetic compatibility (EMC/EMI) protection suited to industrial, marine, and offshore electrical environments.
Industrial Applications
The Danfoss MBS 3000 pressure transmitter is deployed across pump and compressor monitoring, hydraulic power units, water and wastewater treatment plants, HVAC chilled-water systems, and general process pressure monitoring wherever a robust, general-purpose transmitter is needed rather than a specialized high-accuracy instrument. Its wide range of electrical and pressure connections make the Danfoss MBS 3000 a common retrofit choice for replacing aging mechanical gauges with a 4-20 mA signal that can be integrated into a modern PLC or SCADA system, and the optional pulse-snubber variant extends its service life on reciprocating pump discharge lines prone to pressure spikes.
With engineering support in Muscat, Seven Star LLC distributes the Danfoss MBS 3000 pressure transmitter to industrial end users, EPC contractors, and instrumentation integrators throughout Oman and the GCC, including projects in the Sohar and Salalah free zones, Muscat industrial estates, and municipal water and desalination facilities across the Sultanate. Local technical support means instrumentation engineers can specify the Danfoss MBS 3000 with confidence, with availability and lead time for replacement units confirmed at quotation.
Technical Specifications
Key specifications for the Danfoss MBS 3000 general purpose pressure transmitter are summarized below.
| Parameter | Specification |
|---|---|
| Model | Danfoss MBS 3000 |
| Pressure range | 1 – 600 bar (gauge or absolute) |
| Output signals | 4-20 mA, 0-5 V, 1-5 V, 1-6 V, 0-10 V, 1-10 V |
| Accuracy (EN 60770) | ±0.5% FS typical, ±1% FS max |
| Non-linearity (BFSL) | ±0.2% FS |
| Response time | < 4 ms (liquids < 100 cSt) |
| Overload pressure | 6 × FS (max. 1500 bar) |
| Burst pressure | 6 × FS (max. 2000 bar) |
| Durability | > 10 × 10&sup6; pressure cycles |
| Wetted parts / enclosure | Acid-resistant stainless steel AISI 316L, fully welded |
| Enclosure rating | IP65 standard; IP68 cable version available |
| Variant | MBS 3050 with integrated pulse-snubber |
Request a Quote for Danfoss MBS 3000 General Purpose Pressure Transmitter
Facility engineers and procurement teams across Oman and the GCC can request a formal RFQ for the Danfoss MBS 3000 pressure transmitter directly from Seven Star LLC’s instrumentation division. Seven Star LLC supplies on request, provides technical datasheets on request, and offers technical support for every Danfoss MBS 3000 unit supplied – contact our technical sales team today to confirm range, output signal, and connection type for your application.
Related Products
- Rosemount 3051S Coplanar Pressure Transmitter
- Honeywell STR82D-21CS000-00000000 SmartLine Remote Seal Pressure Transmitter
- JUMO dTRANS p02 DELTA Differential Pressure Transmitter
- JUMO Type 4304 Pressure and Differential Pressure Transmitter
- WIKA UPT-20 Universal Process Pressure Transmitter
- VEGABAR 82 Pressure Transmitter
- Datasheet Danfoss MBS 3000 General Purpose Pressure Transmitter Datasheet Download
Danfoss product families on this page
Three VLT drives are listed, each aimed at a different duty: the VLT HVAC Drive FC 102 for fans and building services, the VLT AQUA Drive FC 202 for water and wastewater pumping, and the VLT AutomationDrive FC 302 for general industrial machinery. The LCP 12 control panel with potentiometer (code number 132B0101) is also listed; Danfoss specifies it for the VLT Micro Drive FC 51. In pressure measurement there are the MBS 3000 general purpose transmitter and the MBS 5100. Valves include the AB-QM pressure independent control valve in DN 15 to DN 250, the EVR 25 servo-operated solenoid valve and the ICV pilot-operated valve for industrial refrigeration.Where Danfoss equipment is used
District cooling and chilled water plants, air handling units, booster and irrigation pump stations, desalination and wastewater works, ammonia and CO2 refrigeration plants, food storage and marine engine rooms are the usual places. Demand in the GCC is driven largely by cooling and water.Ordering Danfoss parts: what we need
Every Danfoss product has a code number, and drives also carry a long type code string on the label. Send both. For a drive we need the motor power and current, the mains voltage, enclosure rating, any fieldbus or option card and the filter class. For an MBS transmitter give the pressure span, output signal, pressure connection and electrical connection. For valves give the size, connection type, coil voltage where relevant and the refrigerant or medium.Browse Danfoss products by category: AC Drives, Pressure Instrumentation, Control Valves, Solenoid Valve.
Reviews
There are no reviews yet.