- Automation & ControlView all 2,620 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: VEGA
VEGA VEGASWING 63 Vibrating Level Switch with Tube Extension
Description
Overview
The VEGA VEGASWING 63 is a vibrating level switch with tube extension purpose-built for filling height measurement, dry run protection, and pump protection in liquids. As a universal level switch, the VEGASWING 63 detects the liquid level reliably with millimeter accuracy regardless of mounting position, making it one of the most trusted point level detection technologies used across process, water, and chemical industries worldwide. Its tube extension design allows the switching point to be positioned up to 6 meters away from the instrument’s installation location, giving engineers exceptional flexibility when specifying vessel and tank instrumentation.
For operators across Oman and the wider GCC managing tanks, reaction vessels, and pump protection systems, the VEGASWING 63 offers a maintenance-light, product-independent switching solution that performs reliably even in liquids with varying density, viscosity, or conductivity. Seven Star LLC supplies the VEGA VEGASWING 63 vibrating level switch to customers across Muscat, Sohar, Salalah, and the Sultanate of Oman as a VEGA supplier, providing instruments with manufacturer documentation and technical support.
Measurement and Operating Principle
The VEGASWING 63 operates on the vibrating fork principle: a piezoelectrically energized tuning fork vibrates at approximately 1200 Hz when uncovered. Once the liquid level rises and covers the fork, the vibration frequency and amplitude change measurably, and this shift is detected by the instrument’s electronics to trigger a switching event. Because the switching mechanism depends on mechanical vibration damping rather than the electrical or optical properties of the medium, the VEGASWING 63 delivers consistent, product-independent detection across a very wide range of liquids, with density from approximately 0.5 to 2.5 g/cm³.
The instrument is available with a variety of output options including relay (DPDT), contactless electronic switch, transistor (NPN/PNP), two-wire 8/16 mA, and NAMUR signal transmission, allowing straightforward integration with virtually any control system architecture. A signal lamp on the electronics module indicates the current switching condition, while a DIL switch allows on-site adaptation to the specific product density for optimized sensitivity.
Switching precision is defined by a hysteresis of approximately 2 mm in vertical mounting orientation and a non-repeatability of 0.1 mm, with a response delay of approximately 500 ms on both switching transitions that helps the instrument ride through surface turbulence or foam without spurious switching events.
Engineering Design of the VEGA VEGASWING 63
The VEGASWING 63 is engineered for demanding process conditions, with a process temperature rating from −50°C to +250°C and process pressure rating from −1 to 64 bar, making it suitable for both ambient and high-temperature, high-pressure applications. Wetted parts are available in a range of corrosion-resistant materials including PFA, 316L stainless steel, Alloy C22, Alloy 400, ECTFE, and enamel, allowing selection of the appropriate material for aggressive or hygienic media. Process connections include threaded connections from G¾ / ¾ NPT, flange connections from DN25 / 1″, and an extensive range of hygienic fittings including Clamp, Varivent, SMS, and DIN 11864 connections for sanitary and pharmaceutical applications.
Housing options include plastic, aluminium, and stainless steel (precision cast or electropolished), with protection ratings up to IP66/IP68 (1 bar) for demanding outdoor and washdown environments. The VEGASWING 63 holds a wide range of international approvals including ATEX, CSA, FM, IEC, and SIL2 qualification for functional safety applications, along with overfill protection approvals (WHG, VLAREM II) and food/pharma certifications (3A, EHEDG, FDA), making it suitable for both standard industrial duty and safety-critical or hygienic installations.
The relay output variant of the VEGASWING 63 switches up to 253 V AC/DC through two floating change-over contacts, while the electronics accept a supply of 20–253 V AC or 20–72 V DC with power consumption as low as 8 VA on AC or 1.5 W on DC, keeping installed loop power modest even on remote tank sites. The tube extension itself is a ø21.3 mm probe available in 316L, Alloy C22, enamelled, ECTFE-coated, or PFA-coated finishes weighing approximately 920 g per meter, and the housing and tube assembly are rated to withstand 1 g vibration across 5–200 Hz per EN 60068-2-6. Onboard electronics continuously self-monitor the tuning fork for corrosion, mechanical damage, loss of vibration, or a broken piezo drive line, forcing the switch to a defined fail-safe output state the moment a fault is detected – a diagnostic capability particularly valued in SIL2-rated overfill protection loops.
Key Features
- Product-independent switching point for reliable detection in virtually any liquid
- Millimeter-accurate detection regardless of mounting position
- Tube extension allows switching point up to 6 m from the installation site
- Process temperature range −50°C to +250°C, pressure range −1 to 64 bar
- Multiple output options: relay, transistor, two-wire 8/16 mA, NAMUR
- SIL2 qualified for functional safety and overfill protection applications
- Wide range of process connections including hygienic fittings
- Low maintenance, simple setup without medium calibration required
- Continuous self-monitoring of the tuning fork and piezo drive line for corrosion, damage, or line break
Industrial Applications
The VEGASWING 63 is widely used in vessels and tanks as an empty or full detector, and in approved overfill protection, dry run protection, and pump protection applications across chemical processing, water and wastewater treatment, and food and beverage production. Its tube extension configuration makes it particularly well suited to tall vessels and reaction tanks where the switching point must be located at a specific depth away from the mounting nozzle, such as in the chemical reaction vessels and water storage tanks common throughout process industries.
In Oman’s expanding industrial and water infrastructure sectors, including facilities supporting the Sohar and Salalah economic zones, the VEGASWING 63 gives plant engineers a dependable point level solution for both standard process tanks and safety-critical overfill protection systems. As a trusted supplier of VEGA products, Seven Star LLC assists customers throughout the Sultanate of Oman with instrument selection, approvals guidance, and after-sales support for the VEGASWING 63 and the broader VEGA level and switching product range.
Technical Specifications
| Model | VEGA VEGASWING 63 |
| Type | Vibrating level switch with tube extension |
| Measuring Range (Distance) | Up to 6 m |
| Process Temperature | −50°C to +250°C |
| Process Pressure | −1 to 64 bar |
| Liquid Density Range | > 0.5 to 2.5 g/cm³ |
| Tube Extension Diameter / Weight | ø21.3 mm, ≈ 920 g/m |
| Relay Output Rating | 253 V AC/DC max, 3 A AC / 1 A DC, DPDT |
| Power Supply | 20–253 V AC (50/60 Hz) or 20–72 V DC |
| Output Options | Relay (DPDT), transistor (NPN/PNP), two-wire 8/16 mA, NAMUR, contactless electronic switch |
| Protection Rating | Up to IP66/IP68 (1 bar) |
| Approvals | ATEX, CSA, FM, IEC, SIL2, WHG, VLAREM II, 3A, EHEDG, FDA |
| Manufacturer | VEGA |
| Ambient Temperature | -40 to +70 °C |
| Dynamic Viscosity | 0.1 to 10000 mPa s |
| Extended Pressure Function | Function ensured up to 100 bar at max. +50 °C process temperature (threaded versions only) |
| Relay Breaking Capacity | Min. 50 mW; max. 750 VA AC, 40 W DC (with U below 40 V DC) |
| Power Consumption | 1 to 8 VA (AC), approx. 1.5 W (DC) |
| Tuning Fork Length | 38 mm |
| Standard Process Seal | Klingersil C-4400 (supplied); wetted parts 316L in standard version |
Order Your VEGA VEGASWING 63 Today
Contact Seven Star LLC to request a quotation, datasheet, or technical consultation for the VEGA VEGASWING 63 vibrating level switch with tube extension. As a VEGA supplier serving Muscat, Sohar, Salalah, and the greater Sultanate of Oman, Seven Star LLC supplies VEGA instrumentation with manufacturer documentation and dedicated technical support for level and point level detection projects across the GCC.
VEGASWING 63 density setting, viscosity range and pressure limits
The VEGA specification sheet for the relay version gives a density range of 0.7 to 2.5 g/cm³ in the standard setting, extended to 0.5 to 2.5 g/cm³ by switching over on the electronics module. Dynamic viscosity may lie between 0.1 and 10000 mPa s. The tuning fork is only 38 mm long, and when it is covered with medium its resonance frequency decreases, which the electronics convert into a switching command.
Rated process pressure is -1 to +64 bar at process temperatures from -50 to +250 °C. For threaded versions only, VEGA additionally states that the function of the instrument is ensured up to an operating pressure of 100 bar at a maximum process temperature of +50 °C. The permitted ambient temperature is -40 to +70 °C, and the hysteresis is about 2 mm with vertical installation.
VEGASWING 63 relay electronics, materials and approvals
The relay electronics take 20 to 253 V AC at 50/60 Hz or 20 to 72 V DC and consume 1 to 8 VA on AC or roughly 1.5 W on DC. Switching voltage is limited to 253 V AC/DC and switching current to 3 A AC or 1 A DC. The breaking capacity is at least 50 mW and at most 750 VA AC or 40 W DC below 40 V DC.
In the standard version the wetted parts are stainless steel 316L and the supplied process seal is Klingersil C-4400; VEGA also lists Alloy C22, Alloy 400, PFA, ECTFE and enamel. Besides the tube extension version there are versions for hygienic applications, with gas-tight leadthrough and with temperature adapter. Explosion protection is available as intrinsic safety, flameproof enclosure and dust ignition protection, and SIL qualification is optional up to SIL2.
Related Products
- ABB K-TEK AT100 Magnetostrictive Level Transmitter
- ABB Level Measurement Accessory – ABB-EC External Chamber & Displacer Replacer
- VEGA VEGAPULS C21 Compact Radar Level Sensor
- Anderson-Negele L3 Continuous Hygienic Level Sensor
- Micropilot FMR52 Radar Level Transmitter
- ABB LST200 Ultrasonic Level Transmitter
Datasheets & Documents
- Instruction Manual VEGA VEGASWING 63 Vibrating Level Switch with Tube Extension Manual Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
VEGA is a German maker of level and pressure instruments. Bruno Grieshaber founded the company in 1959 in Triberg in the Black Forest, and it has been based in Schiltach since 1975, still family owned as VEGA Grieshaber KG. VEGA is best known for radar level sensors: it introduced the first two-wire radar level sensor in 1997 and the first 80 GHz radar sensor for bulk solids, the VEGAPULS 69, in 2015.
Seven Star LLC is an independent supplier listing VEGA radar and guided wave radar transmitters, point level switches, pressure transmitters and signal conditioning instruments for buyers in Oman and the GCC. Sensors are matched from the product code on the type label.
VEGA at a glance
| Origin | Founded by Bruno Grieshaber in 1959 in Triberg, Germany |
|---|---|
| Headquarters | Schiltach, Black Forest, Germany (since 1975) |
| Ownership | Family-owned company: VEGA Grieshaber KG |
| Milestones | First two-wire radar level sensor (1997), first 80 GHz radar for bulk solids, VEGAPULS 69 (2015), VEGAPULS 6X single radar platform for liquids and solids |
| Product families | VEGAPULS radar, VEGAFLEX guided wave radar, VEGASWING and VEGAPOINT switches, VEGACAL capacitive probes, VEGABAR and VEGADIF pressure, VEGAMET and VEGADIS signal conditioning |
VEGA sensor and instrument series
| Series | Type | Typical use |
|---|---|---|
| VEGAPULS 6X, VEGAPULS 69, VEGAPULS 64 | Process radar level transmitters (80 GHz) | Storage and process tanks, reactors with agitators, silos and bulk solids |
| VEGAPULS 11, 21, 31, 42 | Compact radar sensors | Water and wastewater, simple storage tanks; VEGAPULS 42 with IO-Link for machine integration |
| VEGAPULS C 21, C 11, C 22, C 23 | Radar sensors with fixed cable, IP68 | Wet wells, pumping stations, open channels and river levels |
| VEGAFLEX 81, 82, 83, 86 | Guided wave radar (TDR) | Level and interface in liquids, bulk solids, hygienic and high-temperature or high-pressure service (VEGAFLEX 86) |
| VEGASWING 61, 63, VEGAPOINT 21 | Vibrating and capacitive point level switches | Overfill protection, dry-run protection and high or low level alarms |
| VEGACAL 62 to VEGACAL 67 | Capacitive rod and cable probes | Point and continuous level in solids and conductive or adhesive liquids |
| VEGABAR 82, 83, 28, 29, 38 | Pressure transmitters, ceramic or metallic cell | Process pressure and hydrostatic level; compact 18/19 and 28/29/38 versions for utilities |
| VEGADIF 85 | Differential pressure transmitter | DP flow, filter monitoring and level in pressurised vessels |
| VEGAMET 841, VEGADIS 176 | Controller and loop display | Level display, pump control and remote indication of 4-20 mA signals |
Where VEGA instruments are used
VEGA radar sensors measure level in crude oil and product tanks, separators, chemical reactors, cement and aggregate silos, grain stores and water reservoirs. Compact cable radars are widely used in wastewater pumping stations and flood monitoring. Because 80 GHz radar focuses a narrow beam, it can measure past internal structures in a tank, and it is not affected by the temperature, pressure or vapour above the product, which suits hot Gulf storage tanks.
Ordering VEGA instruments: what we need
The product code on the type label (for example PS64.XXXXXXX) fixes the measuring range, antenna or probe, process connection, electronics and approvals. Send it with the serial number. For a new measurement add the medium and its dielectric constant if known, tank or silo height and internals, process pressure and temperature, process connection, output (4-20 mA HART, PROFIBUS PA, Modbus or IO-Link), and any hazardous-area or overfill protection approval required.
Facts checked against VEGA company and product information, October 2026.
Browse VEGA products by category: Level Transmitter, Pressure Instrumentation, Controllers and Data Acquisition.
FAQ
Questions about the VEGA VEGASWING 63 Vibrating Level Switch with Tube
Answers from our engineering team on installation, compatibility and integration.
01How does the VEGASWING 63 detect liquid level?
The VEGASWING 63 uses a piezoelectrically energized tuning fork vibrating at approximately 1200 Hz. When liquid covers the fork, the vibration is damped, and this change is detected to trigger a switching output.
02How far can the switching point be from the installation site?
The tube extension design of the VEGASWING 63 allows the switching point to be located up to 6 meters away from the mounting location.
03What liquid densities can the VEGASWING 63 detect?
The VEGASWING 63 reliably detects liquids with densities from approximately 0.5 to 2.5 g/cm3, independent of the specific product properties.
04Is the VEGASWING 63 suitable for overfill protection?
Yes. The VEGASWING 63 holds SIL2 qualification along with WHG and VLAREM II overfill protection approvals, making it suitable for safety-critical level applications.
05Is Seven Star LLC a trusted VEGA supplier in Oman?
Yes. Seven Star LLC is a trusted VEGA distribution supplier supplying genuine VEGA instrumentation across Muscat, Sohar, Salalah, and the wider Sultanate of Oman.


















Reviews
There are no reviews yet.