Schneider Electric METSEPM5560 PowerLogic PM5560 Power Meter

METSEPM5560 PowerLogic PM5560 power and energy meter with dual Ethernet

The METSEPM5560 is a Schneider Electric product listed in the datasheet as: power meter PowerLogic PM5560, 2 ethernet, up to 63th Harmonic, 1,1MB 4DI/2DO 52 alarms. The PM5560 is a panel-mounted power meter from the PowerLogic PM5000 series. It measures current, voltage, power and energy, analyses harmonics up to the 63rd, and provides two Ethernet ports plus serial communication so it can act as a gateway. Seven Star LLC supplies the METSEPM5560 in Oman and the GCC as an independent supplier based in Muscat.

Reading the reference: METSE marks the Schneider meter prefix, PM5560 the model in the PM5000 line. The datasheet title states 2 Ethernet ports, up to the 63rd harmonic, 4 digital inputs, 2 digital outputs and 52 alarms.

Technical specifications of the METSEPM5560

Measurement and power-quality functions

Power-quality analysis: up to the 63rd harmonic. Measured quantities: Current; Voltage; Frequency; Power factor; Energy; Active and reactive power. Accuracy class: Class 0.2S active energy IEC 62053-22. Accuracy: Apparent power ± 0.5 %; Frequency ± 0.05 %; Active energy ± 0.2 %; Reactive energy ± 1 %; Active power ± 0.2 %; Voltage ± 0.1 %. Sampling rate: 128 samples/cycle. Data recording: Event logs; Maintenance logs; Min/max of instantaneous values; Data logs; Alarm logs; Time stamping. Memory: 1.1 MB. Network types: 3P + N; 3P; 1P + N.

Class 0.2S for active energy is suitable for revenue-grade billing and tight verification. Harmonic analysis to the 63rd order helps find drive and rectifier distortion. Event, alarm, maintenance and min/max logs allow a post-incident look at disturbances.

Communications, web services and the place of the METSEPM5560 in a monitoring system

The meter has two Ethernet ports (as a daisy-chain or separate networks) and an RS485 serial port, with an Ethernet-to-serial gateway function. The datasheet lists web services such as e-mail alarm notification and web pages for diagnostics.

It integrates with supervisory systems by Modbus and other protocols as the datasheet lists. Related meters: PM5110 for basic monitoring, PM2110 for simpler needs.

Selection checklist for the METSEPM5560

• Accuracy class and standard needed for billing.
• Harmonic order required.
• Ethernet and serial communication needs.
• Digital inputs/outputs and alarm counts.
• Panel cut-out and depth.
• Current transformers and ratio planning.

Wiring, setup and commissioning of the METSEPM5560

Mount flush in a 96 x 96 mm cut-out, connect voltage inputs through fuses, wire the CT secondaries with shorting blocks, and set the CT and VT ratios and system type. Configure the network address and time sync.

Verify readings against a reference instrument, check phase sequence and CT polarity (negative power usually means a reversed CT), and set alarm thresholds.

Typical applications of the METSEPM5560 in Oman and the GCC

Main incomers, large motor feeders, generators, and data-centre or plant substations in the region. In hot switchrooms check the temperature limit of the display.

Dimensions, environment and approvals of the METSEPM5560

For the METSEPM5560, plan the mounting space from the datasheet: 96 mm (W) x 96 mm (H) x 72 mm (D). The METSEPM5560 weighs 450 g. Mounting, derating and enclosure choices follow the environmental data below, which should be compared with the actual panel temperature and the dust and humidity of the site in Oman and the GCC.

Ambient temperature limits in the datasheet: -25 to 70 °C. Relative humidity: 5 to 95 % 50 °C non-condensing. Ingress protection: IP54 display: conforming to IEC 60529; IP30 rear: conforming to IEC 60529. Operating altitude: <= 3000 m. Standards listed: EN 50470-3; IEC 61557-12:2015; IEC 62053-22:2020; IEC 62053-24; IEC 60529; EN 50470-1; UL 61010-1; ANSI C12.20; IEC 62053-23:2020. Certifications listed for this reference: CE conforming to IEC 61010-1; CULus conforming to UL 61010-1; BTL.

Information to send with an RFQ for the METSEPM5560

• Full reference and quantity required
• Existing equipment, panel or rack it must fit
• Supply voltage, load or signal details of the application
• Required delivery location and timing
• Whether a spare, a replacement or a new installation

Documents and quotation

A datasheet for this product is attached on this page. It lists the electrical, mechanical and environmental data summarised above.

Send us the part number, quantity and application and we will confirm availability and a quotation. Seven Star LLC is an independent supplier in Muscat and does not represent itself as an official channel of the manufacturer.